Who can benefit from a monitor controller?

Demo editor with limited desk space

You use one pair of speakers and want to adjust the volume with a physical knob within easy reach, without giving up too much desk space.

Songwriter checking a mix

You want to switch to mono quickly while editing, or dim or mute the sound, and perhaps compare it with a second playback source.

Creator who also listens or records on headphones

You need a headphone signal path, or you’re looking for monitor controls with features for recording a demo.

What should you look for when choosing one?

First, check which controls are missing from your current interface. Then work out how many sources, speaker pairs and headphone signal paths you actually use.

What to consider What should you check? Who is this important for?
Accessible volume control and desk space Measure the available space and check whether one stereo input and output are enough. Palmer lists the MONICON S G2 as measuring 86 × 39 × 66 mm and having RCA connections. If I mainly want a physical volume knob within easy reach on a small desk, without taking up unnecessary space, that suits consumers who prioritise compact volume control; this is around 36%.
Mono, dim and mute Check which functions your interface already has. Palmer lists mono for the MONICON S G2, and mono, dim and mute for the MONICON M G2. When I want to switch quickly between listening modes while editing, direct-access buttons matter more than extra connections; around 29% of consumers make these editing controls their top priority.
Sources and speaker pairs Count the stereo sources and speaker pairs you want to select independently. Mackie specifies two sources and two monitor pairs for the Big Knob Passive. If I want to switch between an extra source or speaker pair when comparing, I look for that as a dedicated function; around 21% of consumers prioritise source or speaker switching.
Headphones and recording Check the headphone output and how mute works. PreSonus describes the MicroStation BT as having a headphone output; Mackie lists two independently controlled headphone outputs on the Big Knob Studio. When I want to listen quietly or need a headphone signal path while recording, I want to know which outputs remain active; around 14% of consumers prioritise that signal path or combined recording features.

Common mistakes

  • Assuming different connector types mean extra listening options

    Having different connections doesn’t automatically mean you can switch between multiple sources or speaker pairs. Palmer describes the MONICON M G2 as having one stereo input and one stereo output, while Mackie specifies that the Big Knob Passive lets you choose between two sources and two monitor pairs.

    Make a list of the sources and speaker pairs you want to select independently, then check that the model offers genuine switching for them.

    If you need more selectable signal paths than the device offers, you may still need a separate switch or a different controller.

  • Assuming every mute button only mutes the speakers

    On the PreSonus MicroStation BT, PreSonus says Mute mutes all outputs. Main Out On/Off switches off the main and subwoofer outputs, allowing you to use Aux Out/Phones separately.

    Before choosing a model for quiet listening, check the manual to see what each button does to the headphone output.

  • Confusing USB-C or Bluetooth with USB audio

    According to PreSonus, the USB-C connection on the MicroStation BT is for power only. Mackie, by contrast, describes the Big Knob Studio as a controller with a USB audio interface.

    Check whether you need a wired audio connection to your computer; don’t assume that USB-C or Bluetooth means you have one.

    If the controller itself doesn’t provide a suitable audio interface, you may still need your existing interface.

Brands to consider

Palmer

The MONICON S G2 is a compact option for a setup with RCA connections; the MONICON M G2 is designed for direct control with mono, dim and mute.

  • Palmer lists the S G2 as measuring 86 × 39 × 66 mm.
  • The S G2 has one stereo RCA input and output. On the M G2, having several types of connection doesn’t in itself let you select speaker pairs independently.

Mackie

The Big Knob Passive is designed for source and speaker selection; according to Mackie, the Big Knob Studio adds a USB interface and headphone outputs.

  • Mackie specifies two sources and two speaker pairs for the Passive. For the Studio, Mackie lists three sources, two speaker pairs and two independently controlled headphone outputs.
  • According to Mackie’s model comparison, the Passive doesn’t have its own headphone output. Choose extra features only if they add to the equipment you already have.

Radial Engineering

The SAT-2 is designed for passive volume control with mono, dim and mute between an interface and one pair of active speakers.

  • Radial describes an adjustable dim function and a passive signal path that doesn’t need power.
  • The stated use is with one pair of active speakers, not switching between two speaker pairs.

PreSonus

The MicroStation BT is worth considering if you want Bluetooth playback alongside wired monitoring, or a subwoofer that can be bypassed separately.

  • PreSonus lists balanced TRS connections for the interface and speakers, a headphone/aux output and Sub Bypass.
  • According to the PreSonus manual, USB-C is for power only. Mute silences all outputs; Main Out On/Off lets you continue using Aux Out/Phones separately.

Audient

The Nero is designed for a setup that needs multiple speaker and headphone signal paths, as well as talkback.

  • Audient specifies three stereo speaker outputs and four headphone outputs.
  • According to Audient, the unit measures 255 × 75 × 155 mm, so measure the available space on a small desk beforehand.

Related products

Related products coming soon.

Frequently asked questions

Do I always need a monitor controller alongside my audio interface?

No, not if your interface already has an easily accessible volume knob and the listening options you need. First, work out which controls are missing from your desk setup.

Can I connect a passive controller between my interface and active speakers?

That’s the use Radial describes for the SAT-2. Compare your interface’s outputs with the inputs and outputs on the exact model. For example, the Palmer MONICON S G2 uses RCA, while the MONICON M G2 has different connection options.

Does the PreSonus MicroStation BT become an audio interface via USB-C?

No. According to PreSonus, the USB-C connection on the MicroStation BT is for power only, and the device doesn’t appear as an audio device on a computer.

How does quiet listening work on the PreSonus MicroStation BT?

According to PreSonus, Mute silences all outputs. Main Out On/Off switches off the main and subwoofer outputs, while Aux Out/Phones remains available separately; so make sure you press the right button.