Who is this suitable for?

Mixer with few spare sockets

You already have an audio interface and speakers, and mainly want to control volume and mono directly while mixing, without needing an extra power socket for the controller.

Mixer with two monitoring setups

You want to compare the same demo through two existing pairs of speakers and are looking for a suitable way to switch between the outputs.

Recording engineer with a musician on headphones

As well as monitoring your own mix, you need a separate, independently adjustable listening route for a musician. First check whether your interface already provides one.

What should you look for?

First check which monitoring features are already easily accessible on your interface, then decide whether you need one or more separate listening routes.

What to consider What to look for Who is this important for?
Power Check whether the exact model needs its own power supply; don’t assume based on the presence of a USB connection. If an extra plug is your biggest constraint, look for a controller that doesn’t need its own power supply. Around 36% of consumers prioritise avoiding an extra power connection.
Controls while mixing Check whether it has volume, mono and mute controls, and whether those functions are already easy to access on your interface. If you want to adjust volume and mono quickly while assessing vocals and acoustic instruments, direct access to those functions matters. Around 29% of consumers give mixing controls top priority.
Connections and monitor pairs Compare the connectors for each channel and count the speaker pairs that can be selected independently. If you want to switch between sources or speakers, you’ll need the right connections and an additional selectable route. Around 21% of consumers prioritise this switching option.
Headphone route Check your interface’s cue outputs, then compare the controller’s headphone outputs, controls and power requirements. If a musician needs their own listening route while recording, adjusting speaker volume alone won’t be enough. Around 14% of consumers prioritise separate headphone or cue controls.

Common mistakes

  • Assuming ‘USB’ means ‘no extra plug needed’

    A USB connection doesn’t automatically mean the controller is powered via USB. Mackie states that the Big Knob Studio and Studio+ need an external power supply.

    Check the power requirements for the complete model before planning your available connections and space.

  • Assuming different connections mean multiple monitor pairs

    Palmer specifies that the MONICON M G2 has one stereo input and one stereo output. Different connector types don’t automatically provide speaker routes that can be switched independently.

    Count the stereo routes and check which ones you can select independently.

  • Buying a passive volume knob for a separate musician’s mix

    A separately adjustable Main/Cue route is a specific feature, not something you can expect every monitor controller to include.

    Check your interface’s capabilities first, then work out what kind of headphone mix the musician needs.

    If your interface doesn’t provide that route, you may need extra equipment for headphone amplification or cue routing.

  • Assuming a passive controller balances signals

    ESI states that the MoCo doesn’t convert an unbalanced input signal into a balanced one.

    Check the source, cable and speaker input together before choosing your connection route.

    A mismatch in connections may mean you need a different cable or signal route.

Brands to consider

Mackie

The Big Knob range covers everything from passive source and speaker switching to more advanced features.

  • Mackie lists two sources, two monitor pairs, and mono, mute and dim controls for the Big Knob Passive; this model doesn’t need its own power supply.
  • According to Mackie, the Big Knob Studio and Studio+ need an external power supply, even when using USB.

Palmer

The MONICON range spans everything from a compact RCA route to more advanced monitoring and headphone features.

  • Palmer describes the MONICON S G2 G as having a passive design with RCA inputs and outputs. The MONICON M G2 offers mono, dim and mute.
  • The MONICON M G2 has one stereo output and no second selectable monitor pair. The headphone amplifier in the MONICON L G2, among other features, uses power.

ESI

The MoCo is a passive option with two stereo sources and two stereo outputs.

  • ESI lists features such as mono, mute and channel swapping.
  • ESI states that the MoCo doesn’t convert an unbalanced signal into a balanced one.

Behringer

The MONITOR1 is a simple passive controller for one pair of speakers.

  • Behringer specifies mono and mute functions, as well as several types of input and output.
  • According to Behringer, you can’t use the different input and output types at the same time. No dim function is listed.

PreSonus

The Monitor Station V2 is designed for setups that need multiple monitor pairs, headphone routes and talkback.

  • PreSonus specifies three stereo speaker pairs and four headphone outputs, each with its own level control and Main/Cue selection.
  • If you only need passive volume control, you may not need these extra routes. Check the power requirements and available space for the exact model.

Joybuy products

Related products will be available soon.

Frequently asked questions

Can a passive monitor controller replace my audio interface when recording a folk demo?

No, not if you need the interface to record. In Mackie’s model comparison, the Big Knob Passive is a monitor controller without USB I/O. Decide separately where to connect your microphones, recording equipment and speakers.

How do I connect a simple monitor controller?

Connect the line outputs of your interface to your speakers’ inputs via the controller, and compare the connectors for each channel. Palmer specifies that the MONICON M G2 has one stereo input and one stereo output; its different output connectors don’t automatically make up two monitor pairs that can be switched independently.

Will a multi-socket extension lead solve a shortage of sockets by itself?

No. You should also consider the electrical load of your setup. The Netherlands Fire Service recommends plugging high-power devices directly into a socket wherever possible, and warns against connecting extension leads to one another without careful consideration.

What are my rights when buying a monitor controller online from a business in the Netherlands?

According to the Dutch Government, you’ll generally have 14 days to change your mind when buying at a distance, although there are exceptions. You’re also entitled to a product that meets the terms of your agreement; in the Netherlands, there’s no fixed two-year period for the legal guarantee. This is separate from any manufacturer’s warranty.