Who is a monitor controller for?

Stereo composer with one pair of speakers

You mix at a small desk and want to know whether an easy-to-reach volume knob with mono, mute or dim controls would add anything to your audio interface. Palmer lists these features for its MONICON models.

Mixer with multiple listening routes

You compare stereo speakers or sources, listen on headphones too, or work with someone who needs to monitor the mix. Decide which routes you need: Mackie, Audient and PreSonus list different combinations for each model.

Creator delivering a multi-channel mix

You need to monitor a confirmed 5.1 or other multi-channel format separately. SPL describes the SMC for 5.1, while Audient describes ORIA for multi-channel speaker set-ups.

What should you look for?

First, check your delivery format and the controls already available on your interface. Then choose only the source, speaker or headphone routes that suit the way you mix, and measure up to make sure the controller will fit on your desk.

The percentages below relate to consumers considering a monitor controller for this specific film-scoring task; each row describes a primary buying need.

Point to consider What to look for when buying Who is this important for?
Convenient controls on a small desk Measure the space available and check which controls your interface already puts within easy reach. If I want to adjust the level quickly or switch to mono while mixing, I want to know whether an extra box will genuinely add anything. Around 36% of consumers prioritise convenient controls on the desk.
Comparing stereo sources and speaker pairs Count sources and speaker pairs separately; check whether the exact model has the switching options and mono function you want. When I want to check my stereo mix on different sources or speakers, I need the right switching routes. Around 29% of consumers prioritise comparing stereo routes.
Listening on headphones alone or with someone else Check the number of headphone outputs, whether they have independent level controls, and what the mute function switches off. If someone is listening along or I want to keep my speakers quiet, I need a suitable headphone route. Around 21% of consumers prioritise listening alone or with someone else.
Monitoring separate multi-channel outputs Compare the delivery format with your interface outputs, speaker set-up and the number of input channels on the controller. If my delivery genuinely requires 5.1 or another multi-channel format, the monitor route needs to handle those separate channels. Around 14% of consumers have multi-channel monitoring as their primary need.

Common buying mistakes

  • Assuming every film project needs 5.1

    A film score doesn’t necessarily need to be delivered in 5.1. The Mackie Big Knob Passive switches between stereo routes, while SPL describes the SMC for separate 5.1 monitoring.

    Confirm the delivery format before choosing the controller’s channel configuration.

    A controller for an unnecessary multi-channel set-up can take up desk space; conversely, a stereo route won’t be enough if 5.1 is required.

  • Counting connectors as separate listening routes

    Different connection options don’t automatically mean that a controller can select more sources or speaker pairs independently. The Palmer MONICON M G2 specifies one stereo input and one stereo output.

    Count the source and speaker selection options you need, and check the specifications for the exact model.

    If the switching route you want isn’t available, you may still need another controller or additional routing.

  • Assuming every passive controller has a headphone output

    Mackie doesn’t list a headphone output for the Big Knob Passive; the separate Big Knob Studio does have one.

    Check whether the model has a headphone output and its own level control, and see what your interface already offers.

    You may need additional compatible equipment for a separate headphone route.

  • Taking USB-C as proof of a built-in audio interface

    PreSonus says that the MicroStation BT’s USB-C connection is for power only.

    Check which port carries audio and which supplies power only.

    You’ll still need a suitable audio interface to connect to your DAW.

Relevant brands to consider

Palmer

The MONICON S G2 is designed for a stereo route with RCA connections. The MONICON M G2 has one stereo route with different connection options, plus separate mono, dim and mute buttons.

  • Palmer specifies a passive design for both models, so they don’t need a power supply.
  • The M G2’s connections don’t give you a second selectable speaker pair.

Mackie

The Big Knob Passive is designed for switching between stereo sources and monitor pairs. The Big Knob Studio is a separate model for anyone looking for features such as a USB interface, headphone outputs or talkback.

  • Mackie specifies two sources, two monitor pairs, and mono, mute and dim functions for the Big Knob Passive.
  • The Big Knob Studio’s features aren’t automatically included with the Passive; the model comparison doesn’t list USB I/O or a headphone output for the Passive.

PreSonus

The MicroStation BT combines stereo control with a subwoofer route and a headphone/aux output.

  • PreSonus describes a separate sub bypass and a Main Out On/Off function for the main and sub outputs.
  • According to PreSonus, the USB-C port is for power only, not USB audio.

Audient

Nero is designed for multiple stereo and headphone routes; ORIA is a separate model for multi-channel or immersive set-ups.

  • Audient specifies three stereo speaker outputs and four headphone outputs for Nero.
  • Nero is listed as 255 × 75 × 155 mm. ORIA’s multi-channel capabilities don’t automatically apply to Nero.

SPL

The SMC is designed for an existing or planned 5.1 monitor set-up, rather than as an obvious choice for a small stereo workstation.

  • SPL specifies analogue control of six channels and connections for two 5.1 sources.
  • The listed dimensions are 272 × 91 × 220 mm; check that the unit and the appropriate mains version will suit your set-up.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I always need a monitor controller as well as my audio interface?

No, not if your interface already gives you easy access to the volume control for your only stereo pair and you don’t need any extra physical controls. First, work out which function you’re missing, such as source or speaker selection, or a mono button.

How do I connect a compact monitor controller?

Connect your interface output to a suitable line input on the controller, then connect a suitable output to your speakers or amplifier. Check the connections and selectable routes on the exact model; the Palmer MONICON S G2, for example, uses RCA inputs and outputs.

Is the USB-C port on the PreSonus MicroStation BT for DAW audio?

No. According to PreSonus, the USB-C connection is for power only. For audio, PreSonus describes separate analogue inputs and Bluetooth.

When do I need a 5.1 monitor controller for a film score?

Only if your delivery format and monitor set-up require separate 5.1 channels. Also check that your interface has the necessary outputs and that the controller and speakers are suitable for that channel configuration.

Which Dutch product safety rules are relevant to an electrical model?

Business.gov.nl states that electrical and electronic equipment sold in the Netherlands must meet the applicable European safety requirements. For equipment covered by these rules, the government information includes CE marking and an EU declaration of conformity; Bluetooth equipment may also be subject to radio equipment rules. Check the specific version rather than applying these requirements indiscriminately to every passive controller.