Student with one stereo pair
If you mainly mix on your own, having volume controls on your desk, and perhaps mono, dim or mute, can be useful. First, check which controls your audio interface already offers.
For a single stereo pair, a simple monitor controller may be enough if you mainly want to control the volume and need instant access to mono, dim or mute. Choose a model with headphone amplification, cue or talkback only if you want to route those signals through the controller; a passive speaker controller does not automatically offer these features. Also check whether your film project requires stereo or multichannel monitoring.
If you mainly mix on your own, having volume controls on your desk, and perhaps mono, dim or mute, can be useful. First, check which controls your audio interface already offers.
If you want to switch between sources or two stereo pairs while mixing, check how many inputs and outputs you actually need. The Mackie Big Knob Passive and ESI MoCo are examples of models that offer source or speaker switching.
If a performer needs to listen along, check whether you need a separate headphone feed, cue selection or talkback. The number of outputs and the ability to adjust levels independently are also important.
Start with your existing interface and speakers: note down the connections, and the number of sources and stereo pairs you want to use. Then decide whether your mixing sessions call for direct volume control, mono checking or headphone routing.
| Consideration | What to look for | Who it matters to |
|---|---|---|
| Volume and attenuation | Check whether the controller offers volume, mute and, if needed, dim, and whether it will fit between your source and active speakers. A volume control does not remove the need to consider the level and duration of loud listening. | I want to be able to turn down or mute my speakers straight away during long mixing sessions. Around 36% of consumers prioritise direct volume control. |
| Connections and switching | Compare your interface outputs with your speaker inputs, and check how many sources and stereo pairs you need. ESI states that the MoCo does not convert an unbalanced signal to balanced. | If I want to switch between sources or speaker pairs without unplugging cables, the connections and routing need to be right. Around 29% of consumers give connections and switching top priority. |
| Mono checking | Check that the mono control works on the stereo signal path you plan to use; a mono button does not make a stereo controller suitable for multichannel monitoring. | I want to hear quickly how my stereo mix sounds in mono, without having to reconfigure my session. Around 21% of consumers focus primarily on mono checking. |
| Headphones and cue | Check how many people need to listen at once, whether they need the same mix, and whether you need separate level control or talkback. A passive model does not automatically include a headphone amplifier. | When I record with a performer, I want to know whether they need their own headphone feed or cue. Around 14% of consumers prioritise headphone or cue routing. |
Mackie does not specify a headphone output for the Big Knob Passive. ESI states that the MoCo has no built-in headphone amplifier, so these models do not automatically replace your interface’s headphone output.
Before you buy, check where your headphones connect in your existing setup and whether that output provides the feed you need.
According to PreSonus, the MicroStation BT’s USB-C connection is for power only; the computer does not recognise it as an audio device.
Check the exact model to find out whether a computer connection carries audio or only supplies power. For wired audio, use the designated audio input.
A model that switches stereo signals only is not automatically suitable for a project that requires multichannel monitoring. The European Broadcasting Union also states that its guidance on loudness normalisation for film content is not intended as production advice for feature films.
Check whether you only need to assess a stereo mix or also need to monitor and deliver in multichannel.
The Big Knob Passive is designed for analogue switching between two sources and two monitor pairs. The Big Knob Studio is a separate model with a USB interface, headphone outputs and talkback.
The MONICON M G2 is designed for one stereo signal path; the MONICON L G2 offers more sources and outputs.
The MoCo is a passive analogue controller for two stereo sources and two switchable stereo outputs.
The MicroStation BT combines a Bluetooth source with a switchable subwoofer; the Monitor Station V2 is designed for multiple stereo pairs and headphone feeds.
The NERO is a more advanced monitor controller for multiple stereo sources, speaker outputs and headphone feeds.
Not necessarily, if your interface already offers the volume, speaker and headphone controls you need. A separate controller can be useful if you want to switch directly between sources or speakers, or control mono and dim from your desk.
Place the controller in the appropriate analogue signal path between your source, usually the audio interface, and your active speakers. Compare the connectors and number of stereo channels beforehand; ESI specifically states that the MoCo does not convert an unbalanced input signal to balanced.
No. According to PreSonus, USB-C on this model is for power only and the computer does not recognise it as an audio device. For wired audio, use the designated audio input.
Only if the project’s delivery requirements call for one. The simple signal paths described here are designed for stereo; if you need to deliver in multichannel, first check which monitoring channels and connections you need. European Broadcasting Union guidance for film content does not automatically set production requirements for your short film.