Mixing at a sit-stand desk
You want to adjust the volume and quickly switch on mute or mono without reaching for software or an awkwardly placed interface. First, check which controls your interface already offers.
For a single stereo setup, an easy-to-reach volume control with features such as mute, dim and mono may be enough. If you use several pairs of speakers or need to accommodate separate listeners, the available outputs and headphone or cue features matter more. First check what your audio interface can already do, then compare its connections with your speakers and workspace. A stereo controller is not automatically suitable for a multichannel film mix.
You want to adjust the volume and quickly switch on mute or mono without reaching for software or an awkwardly placed interface. First, check which controls your interface already offers.
You want to compare the same score through two physical pairs of speakers or switch a subwoofer separately. The number of outputs and the routing options on your chosen model will be key.
A performer or colleague may need their own headphone feed or talkback. A simple volume control cannot replace these features.
| What to consider | What should you check? | Who is it important for? |
|---|---|---|
| Controls within easy reach | Check that the model has the volume control, mute, dim and mono features you want, and that you can reach the controls both sitting and standing. | If I switch between sitting and standing, I want to adjust the volume without reaching for my interface. Around 40% of consumers say easy-to-reach controls are their main reason for buying. |
| Switching between speaker pairs | Count the physical stereo pairs and check whether the outputs can be selected individually. Also see whether the model offers level control for each set. | If I want to check my mix on two pairs of speakers, I need selectable outputs; a second computer monitor is not an extra monitoring setup. Around 30% of consumers say comparing speakers is their main reason for buying. |
| Separate listening route | Check the number of headphone outputs, the Main/Cue selection, talkback and whether your interface provides the cue feed you need. | If a performer or colleague needs to listen differently from me, a separate headphone or communication route is important. Around 20% of consumers say collaboration is their main reason for buying. |
| Connections and channel routing | Map out the signal chain and check the connection types, any subwoofer filtering and whether the channels required for your delivery format can be managed independently. | If my project requires a particular source, subwoofer route or multichannel format, I want to know in advance whether the system can manage those signals separately. Around 10% of consumers say specialist routing is their main reason for buying. |
A/B monitor outputs switch between connected audio speakers, not computer monitors.
Before buying, count the physical pairs of speakers you actually want to connect.
ESI states that the MoCo has no built-in headphone amplifier. The Mackie Big Knob Passive is also listed without a headphone output.
Check the specifications for the exact model. You may need a separate, suitable listening route for headphones.
A mono output does not automatically make a controller suitable for separate film channels or bass management.
Compare the required channel format and subwoofer filtering with the capabilities of the system you have in mind. Additional routing or filtering may be needed.
The Big Knob Passive is designed for hands-on stereo control and switching between sources and monitor pairs.
The Monitor Station V2 is designed for setups with multiple speakers and headphone feeds.
The CMC2 combines two stereo monitor routes with a mono subwoofer route.
The MONICON M G2 offers a compact passive stereo route, while the MONICON L G2 is designed for more sources and additional listening features.
The MoCo is a passive option for two stereo sources and two stereo monitor outputs.
Not necessarily. First check whether your interface already has an easy-to-reach volume control, the speaker outputs you need and headphone routing. A separate controller is most useful for controls or connection routes that you do not currently have.
Compare the line outputs on your interface with the inputs on the exact model, then check that the controller’s outputs match your speakers. In both sitting and standing positions, make sure the cables can move without pulling on the connections. The lengths you need will depend on your setup.
No. ESI states that the MoCo has no built-in headphone amplifier. Use another suitable output or choose a model with a headphone amplifier.
You cannot tell from the presence of a second stereo monitor output or a mono subwoofer output. First identify the required channel format, then check whether the system you have in mind can route and manage those channels separately.
According to Ondernemersplein, an electrical device with Bluetooth falls under the Radio Equipment Directive. The EU requirements that apply to a specific model depend on the relevant regulations, so check its documentation. A CE mark on its own is not an independent performance test.