Who would find a monitor controller useful?

Musicians editing rehearsal recordings with few sockets

You already have an audio interface and want the volume control close at hand when listening back, without adding another device that needs mains power.

Editors who switch between monitoring setups

You actually use multiple pairs of speakers or audio sources, so you need compatible connections and switching options. If you only use one pair of speakers, a simpler setup may be enough.

Musicians with separate headphone-monitoring needs

You want to monitor through a separate headphone output, either for yourself or someone else. First check whether your audio interface already offers this option.

What should you look for when choosing one?

First check what your audio interface can already do. Then note the connections and monitoring options you need, and only then choose between a passive model and a controller with extra features that require power.

What to consider What to look for Who is this important for?
No extra power supply Check whether the controller itself works without a power supply. Count the power supplies for your interface and active speakers separately. If I want to use as few sockets as possible, I’m looking for a controller that doesn’t need its own power supply for the features I need. Around 42% of consumers prioritise avoiding an extra power supply.
Connections and speaker pairs Note the analogue outputs, connector types and number of stereo pairs you need. Don’t expect a passive model to convert unbalanced audio to balanced audio. When I switch between sources or speaker pairs, the connections need to work with my existing equipment. For around 33% of consumers, connections and the number of monitoring pairs come first.
Controls while editing Compare the controls on your interface with those on the exact controller model. Check specifically whether it has mono, mute or dim. When listening back to recordings, I want to adjust the volume and, if needed, mono or mute without any extra steps. Direct control while editing is the top priority for around 17% of consumers.
Separate headphone output Check your interface’s headphone output and routing. If you’re considering a controller, also check whether its headphone function needs power. When someone needs to listen through headphones separately, I want to know whether my current interface already provides that option. Around 8% of consumers prioritise a separate headphone output.

Common buying mistakes

  • Assuming passive means the whole setup needs no power

    In the setup described, a passive controller doesn’t need its own power supply. That doesn’t mean the connected equipment works without power.

    Count the power connections needed for the entire signal chain and check whether each function on the exact model requires power.

  • Mistaking a speaker output for a headphone output

    According to ESI, the passive monitor controller ESI MoCo doesn’t have a built-in headphone amplifier.

    Check whether your audio interface already provides a suitable headphone output. If not, check both the controller’s headphone output and whether it needs power.

  • Choosing by series name alone

    The Mackie Big Knob Passive and Big Knob Studio are different models. Features on one version don’t automatically apply to the other.

    Compare the full model name with the connections and features you need.

  • Assuming USB-C is automatically an audio connection

    According to PreSonus, the MicroStation BT’s USB-C connection is for power only, so the device won’t appear as a USB audio device.

    Check whether each connection supports audio, power or both.

Brands to consider

Mackie

The Big Knob Passive is designed for two sources and two speaker pairs, without needing its own power supply. The Big Knob Studio is a different model with USB recording features.

  • Mackie says the Big Knob Passive has mono, mute and dim controls.
  • According to Mackie, this model doesn’t have a headphone output or USB audio functionality. Don’t assume these features apply to every Big Knob model.

Behringer

The MONITOR1 is designed for direct control of one speaker pair, while the STUDIO M switches between two sources and two speaker pairs.

  • Behringer specifies mono and mute for the MONITOR1, plus dim for the STUDIO M.
  • Check the exact model: the connections on the MONITOR1 don’t prove that the STUDIO M has the same connections.

ESI

The MoCo is a passive option for switching between two stereo sources and two speaker outputs.

  • ESI lists features including mono, mute and left/right reversal.
  • According to ESI, the MoCo doesn’t have a headphone amplifier and doesn’t convert unbalanced signals to balanced signals.

Palmer

The MONICON M G2 is a compact passive volume controller for one stereo source and one pair of stereo speakers. The MONICON L G2 offers more routing options and a headphone output.

  • According to Palmer, the M G2 has mono, dim and mute controls.
  • According to Palmer, the L G2’s Bluetooth, headphone amplifier and third output are powered. So a passive signal path doesn’t mean all the features work without power.

PreSonus

The MicroStation BT is designed for those who need Bluetooth, a headphone or aux output, or a switchable subwoofer route in addition to analogue monitoring control.

  • According to PreSonus, USB-C is for power only.
  • This means the MicroStation BT isn’t a power-free replacement for a simple passive controller.

Radial Engineering

The SAT-2 is designed as a passive stereo volume controller between an existing interface and one pair of active speakers.

  • Radial specifies that it works without a power supply and includes mono, mute and an adjustable dim function.
  • The described setup doesn’t include switching between two speaker pairs.

Joybuy products

Related products coming soon.

Frequently asked questions

Can a passive monitor controller replace my audio interface?

Not if your interface handles recording or converts the signal into usable audio. The Mackie Big Knob Passive controls and switches the existing monitoring signal; Mackie doesn’t list USB audio functionality for this model. So compare your interface’s features with the controller’s first.

How do you connect a simple monitor controller?

Place a compatible controller in the analogue monitoring path between your interface’s output and your speakers’ input. Check that the connections work with your equipment, and start with the volume turned down low.

Does USB-C on the PreSonus MicroStation BT also carry computer audio?

No. According to PreSonus, the USB-C connection on the MicroStation BT is for power only, so the device won’t appear as an audio device on your computer.

What returns and warranty rights apply to an online purchase in the Netherlands?

For online consumer purchases in the Netherlands, you generally have 14 days from delivery to change your mind, subject to statutory exceptions, according to ACM ConsuWijzer. You’re also entitled to a solution if a product, when used normally, doesn’t meet what you could reasonably expect; the seller is your point of contact. This is a separate right from returning a product because you’ve changed your mind.

Are passive and powered monitor controllers all subject to the same CE marking requirements?

No, you can’t make that claim for the whole category. According to Business.gov.nl, CE marking requirements depend on the product group and the applicable rules; models with Bluetooth may also be subject to radio equipment rules. Check the documentation for the exact model.