Who is this relevant to?

Quiet drum editor

Edits alongside colleagues and wants to mute speakers instantly, with a suitable headphone route for when speakers aren’t an option. Arboportaal points out that disruptive noise can also pose a workplace risk.

Phase-aware editor

Edits multi-mic drum recordings and wants to check them in mono regularly. Shure explains why the phase relationship between microphones matters for this type of recording.

Collaborative editor

Wants to set up a separate listening route for a colleague or musician alongside their own monitoring. Palmer and PreSonus describe models with multiple headphone outputs and source selection.

What should you look for?

Start by checking the outputs on your existing interface and how you want to monitor in the office. Then decide whether you only need direct controls or separate headphone routes as well.

What to consider What to check before buying Who is this important to?
Monitoring quietly at a moment’s notice Check whether mute or dim controls the speakers and where you can connect headphones. Mackie lists these controls on the Big Knob Passive, but this model doesn’t have its own headphone output. When I’m working alongside colleagues, I want to be able to mute the speakers quickly and, if needed, carry on listening through headphones. Around 36% of consumers prioritise quiet operation.
Checking drum tracks in mono Check whether the controller sums the monitoring signal to mono. Shure explains why phase relationships matter in multi-mic recordings; listening in mono doesn’t replace assessing the individual tracks. When working with multi-mic drum recordings, I want to compare stereo and mono quickly. Around 29% of consumers prioritise mono monitoring.
Separate listening routes Check the number of headphone outputs, whether each output has its own level control, and whether Main/Cue selects the sources you need. Palmer and PreSonus describe models with these features. If a colleague or musician needs to listen at the same time, I want to be able to set up their listening route separately. Around 21% of consumers prioritise separate listening routes.
Connecting to your existing equipment Note the type and number of interface outputs, your monitor connections and the USB functionality you need. With the Behringer CONTROL2USB, also check the recording routing: Behringer states that INPUT 3 cannot be recorded via USB. I want to connect my existing interface and monitors without changing the way I work unnecessarily. Around 14% of consumers prioritise system compatibility.

Common pitfalls

  • Assuming every volume controller also drives headphones

    A controller can operate the speakers without having its own headphone output. Mackie states that the Big Knob Passive doesn’t have a headphone output.

    Before buying, map out the signal path from your interface to both the speakers and the headphones. If the controller has no headphone output, you’ll need another route, such as a separate headphone amplifier.

    Without a headphone route, you may need extra equipment or a different controller.

  • Assuming a mono button automatically corrects phase

    A mono button changes what you hear while monitoring; it doesn’t alter the recorded drum tracks. With multi-mic recordings, the phase relationships between microphones can affect the combined sound.

    Compare your edit in stereo and mono, and assess any corrections to the tracks or in your DAW.

  • Choosing a controller with a built-in USB interface without checking the routing

    A controller with USB audio may have recording limitations. Behringer states that INPUT 3 on the CONTROL2USB cannot be recorded via USB.

    Before factoring USB into your setup, compare your intended recording and monitoring routes with the documentation for the exact model.

Brands to consider

Mackie

Mackie describes the Big Knob Passive as a passive controller. According to the model comparison, Big Knob Studio models offer additional interface and headphone features.

  • Mackie lists two source selections, two monitor pairs, and mono, mute and dim controls for the Big Knob Passive.
  • Mackie states that the Big Knob Passive doesn’t have its own headphone output.

Palmer

Palmer describes the MONICON XL as designed for multiple monitor and headphone routes.

  • Palmer lists two headphone outputs with Main/Cue selection and three speaker outputs.
  • The extra routes are mainly useful if you actually need them; the manufacturer’s claim of an uncoloured signal isn’t an independent assessment.

PreSonus

PreSonus describes the Monitor Station V2 as designed to provide separate controls for multiple listeners or pairs of speakers.

  • PreSonus lists four headphone outputs, each with its own level control and Main/Cue selection.
  • Check that the connections and routes work with your existing interface and monitoring setup.

Audient

Audient describes the Nero as a desktop controller for multiple stereo and headphone routes.

  • Audient lists four headphone outputs, three stereo speaker outputs, and mono, dim, cut and polarity controls.
  • These specifications aren’t an independent comparison of sound quality.

Behringer

Behringer says the CONTROL2USB combines monitor control with talkback and a USB audio interface.

  • Behringer lists three adjustable monitor outputs and two headphone outputs.
  • Behringer states that INPUT 3 cannot be recorded via USB. Check that the USB routing meets your recording needs.

Joybuy products

Related products coming soon.

Frequently asked questions

Does the mono button fix phase issues in your drum tracks?

No. The button changes what you hear while monitoring, but it doesn’t alter the recorded tracks. For multi-mic recordings, assess the phase relationships between tracks and make any necessary corrections during recording or editing.

How do you connect a monitor controller to your existing setup?

First, identify which output on your audio interface feeds the controller and which outputs connect to the monitors. Then check the connector type, source selection and headphone route on the model you’re considering; for example, Mackie states that the Big Knob Passive doesn’t have its own headphone output.

How do you use a monitor controller safely in a shared office?

Start at a low volume and use mute or dim when the speakers are disturbing colleagues. According to Arboportaal, the measures required by law depend on actual daily noise exposure; disruptive noise should also be included in the risk assessment.

Who can help if a controller you bought as a consumer is faulty?

The retailer is your point of contact for your statutory guarantee, according to the Rijksoverheid. A manufacturer’s warranty doesn’t replace this right. ACM ConsuWijzer explains that the statutory guarantee period isn’t simply set at two years for every product; what you can reasonably expect in terms of a product’s lifespan depends on the product and the circumstances.