What should you look for?
Start with the features and connections your audio interface already has. Then add only the controls or signal routes you’ll actually use; having two computer screens doesn’t automatically mean you need two pairs of speakers.
Use your existing audio interface
Choose this if: your interface already has an easy-to-reach volume control and the monitoring features you need.
Trade-off: mono, dim, mute or switching controls may be less accessible or unavailable; check your own interface.
Simple passive monitor controller
Choose this if: you mainly want physical volume control and direct access to mono, dim or mute. Mackie also specifies switching between two stereo sources and two pairs of speakers for the Big Knob Passive.
Trade-off: Mackie says the Big Knob Passive has no dedicated headphone output or USB audio interface; your existing interface must provide the audio signals you need.
Controller with headphone control
Choose this if: you want to switch between speakers and a separately controlled headphone route while editing. Palmer specifies this output for the MONICON L G2; Drawmer lists a dedicated headphone level control for the CMC2.
Trade-off: check the connections and power requirements of the exact model; Palmer says the Bluetooth feature, headphone amplifier and one output require power.
Advanced controller for collaboration
Choose this if: you need multiple monitoring routes or a way to communicate with a speaker. Audient specifies multiple speaker and headphone outputs and talkback for the Nero.
Trade-off: not every solo editor needs extra routes; decide in advance which outputs and features you’ll use in your setup.
| What to consider |
What should you check? |
Who is this important for? |
| Volume and mono |
Check whether the exact model offers mono, dim and mute, and whether the volume knob will be within easy reach. |
If I want to adjust the volume quickly while editing and check speech in mono, I want those controls close to my workspace. Around 40% of consumers prioritise direct volume control and mono. |
| Headphone route |
Check whether the model has a headphone output with its own level control, and how that output is powered or routed. |
When I listen to the same intro alternately through speakers and headphones, I want to be able to adjust the headphone level separately. Around 30% of consumers say this is their main requirement. |
| Sources and speaker pairs |
Count your stereo sources and speaker pairs, and check the connections and signal routing of the exact model. |
If I use more than one audio source or pair of speakers, I want to be able to switch between them; my two computer screens don’t determine this. Around 20% of consumers prioritise extra audio routes. |
| Talkback and monitoring routes |
Check whether talkback can reach the intended headphone output and how many separate routes you need. |
When I communicate with a speaker during recording, I want to know whether talkback reaches the right monitoring route. Around 10% of consumers prioritise collaboration and talkback. |
Joybuy products
Related products will be available soon.
Frequently asked questions
Do you need a controller for two pairs of speakers because you have two computer screens?
No, not just because of the screens. Count the audio signals you want to connect and the pairs of speakers you want to use; a monitor controller can switch between audio sources and monitoring outputs.
Where do you connect the controller?
In a typical analogue monitoring setup, the signal runs from the audio interface to a suitable stereo input on the controller, then on to the speakers. Check the connections and instructions for your exact interface, controller and speakers before choosing cables.
What should you check when using and maintaining it?
Start with the monitoring volume low. In the Big Knob Passive manual, Mackie instructs users to keep the unit away from water and clean it only with a dry cloth; these instructions apply to this model.
What if your controller bought online doesn’t work properly?
When you buy as a consumer in the Netherlands, you’re entitled to a product that works as it should, and the seller must provide a solution if there’s a fault, according to the Dutch government. The Netherlands has no fixed statutory guarantee period. For eligible online purchases from a business, you’ll often also have a 14-day cooling-off period; check the terms of your purchase.
Do workplace noise regulations automatically apply to your home studio?
No. The obligations described by Arboportaal apply to employers and employees in the specified circumstances involving daily noise exposure. They aren’t an automatic purchase threshold for every home user.