Who is a monitor controller for?

Solo editor of choir recordings

If you mainly work at one desk, you may want direct volume control and mono, dim and mute functions. First check which of these features your existing audio interface already offers.

Editor using several reference monitors

If you compare the balance of a choir through different pairs of speakers or sources, you’ll need suitable switching. Separate level controls may also be useful.

Recording editor working with singers

If you want to provide singers with a headphone mix as well as monitoring your own audio, check whether the controller has the headphone and any talkback routing you need.

What should you look for when choosing one?

First, work out which controls or signal routes are missing from your existing interface. Then count your sources, pairs of speakers and headphones so you can compare them with the controller’s connections.

What to consider What should you check? Who is this most relevant to?
Direct control Check for mono, dim and mute functions, and make sure the inputs and outputs are compatible with your stereo connections. If I’m editing alone at one desk, I want direct control of the volume and mono setting. Around 36% of consumers prioritise quick volume and mono controls.
Reference monitors Count your stereo sources and pairs of speakers, and check whether you can set the output level for each route. If you check a choir’s balance across several sources or pairs of speakers, you’ll want suitable switching and level controls. Around 29% of consumers give switching between references their highest priority.
Headphones Check the number of headphone outputs, the level controls and which source feeds each output. Also check whether your interface already handles this. If I want to listen on headphones in my home office, I need a suitable route without unnecessary duplication. Around 21% of consumers prioritise headphone listening.
Cue and talkback Check where the cue mix comes from, how many headphones you need to use at once and where talkback is routed. When I’m recording with singers, I may need a separate headphone mix in addition to my own speaker signal. Around 14% of consumers give routing for singers their highest priority.

Buying pitfalls

  • Assuming a volume control is a complete headphone and talkback hub

    According to Mackie’s product specifications, the Mackie Big Knob Passive has no headphone output. If you want to connect headphones through the controller, check that the model offers the route you need.

    Before buying, map out the route from your interface to your speakers and headphones. You may need a separate route for headphone listening or communication.

    If there’s no headphone or communication route, you may need to provide one elsewhere in your setup.

  • Assuming every extra speaker output allows a like-for-like A/B comparison

    If the output levels or switching options aren’t right for your comparison, the volume may change when you switch between pairs of speakers.

    Check the switching options and whether you can set the output levels separately on the exact model you’re considering.

  • Confusing a USB audio interface with USB bus power

    Mackie states that the Big Knob Studio and Studio+ aren’t powered via the USB bus.

    Check the power requirements and what’s included with the version you choose. USB audio doesn’t automatically mean USB power.

    Allow for a separate power connection and enough room on your desk.

Brands to consider

Mackie

The Big Knob Passive is designed for passive switching between 2×2 sources and monitor routes. The Big Knob Studio is an option if you also want a USB interface, headphone outputs and talkback.

  • According to Mackie’s product specifications, the Big Knob Passive has mono, dim and mute functions. The Big Knob Studio also has two headphone outputs and talkback.
  • The Passive has no dedicated headphone output. The Big Knob Studio needs a separate power supply, so check that its features and connections suit your existing setup.

Audient

The Nero is designed for setups with several stereo sources, pairs of speakers and headphone routes.

  • Audient specifies three stereo speaker outputs, four headphone outputs, mono and polarity controls, and talkback.
  • Check whether you need the extra routes and whether the connections are compatible with your interface. These are product specifications, not the results of a comparative performance test.

PreSonus

The Monitor Station V2 is designed for anyone who wants to use several reference monitors and headphone listening stations.

  • PreSonus specifies three stereo speaker pairs, four headphone outputs and built-in talkback. Each headphone output has a Main/Cue selection.
  • Check the source and cue connections before connecting the model to your existing interface.

Palmer

The MONICON XL is an option if you need several pairs of monitors, headphone routes and a visual display of stereo correlation.

  • Palmer specifies three speaker outputs, two headphone outputs and a correlation meter.
  • The meter is a model-specific feature. Check that the connections and controls suit the listening routes you actually use.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Can I connect a monitor controller without replacing my audio interface?

Yes, provided your existing interface supplies the playback signal you need and the controller’s connections are compatible with your interface and speakers. Also check how your current headphone route will continue to work.

How do I set up two pairs of speakers to compare a choir’s balance?

Connect both pairs to the designated stereo outputs and set their levels separately if your model supports this. PreSonus describes this feature for the Monitor Station V2. Check the manual for your chosen model to make sure you connect it correctly.

Does the Mackie Big Knob Studio run on USB power?

No. Mackie states that the Big Knob Studio isn’t powered via the USB bus and needs a separate power supply. Check which power adapter is included with the version you’re considering.

Am I always entitled to exactly two years of statutory warranty in the Netherlands?

No. According to the Dutch government, there is no fixed statutory warranty period in the Netherlands. You can expect a product to remain in good working order for as long as is reasonable to expect. If a product is faulty, contact the seller.

What should I check for electrical safety when choosing a monitor controller?

According to the Dutch Ondernemersplein, electrical and electronic equipment placed on the market must comply with the applicable European rules. Check the product information for the specific item you’re considering and, where relevant, the information about its power supply. A brand name alone doesn’t confirm that a particular item meets these requirements.