Who might benefit from a monitor controller?

Solo editor with one pair of monitors

You want to adjust the listening volume from your desk and check choir passages in mono quickly. First, see which features your audio interface already offers: Sound On Sound explains that an interface and software can handle similar basic tasks.

Editor who works quietly on headphones

You want to mute your speakers and need to check whether your chosen controller has a suitable headphone output. This varies by model; ESI, for example, confirms that the passive MoCo doesn’t have a built-in headphone amplifier.

Editor with multiple listening routes

You regularly switch between pairs of speakers or need a separate listening mix. If so, check the exact model’s number of outputs, level controls and signal routing.

What should you look for in your listening setup?

First, check whether your audio interface already gives you practical volume and mono control. Then consider which physical controls, connections and headphone routes you’re actually missing.

What matters What to look for when buying Who is this important for?
Immediate volume control Check that the knob is easy to reach and that mute or dim is available if you want to use those features. If you want to adjust the listening volume from your desk while editing, without opening software menus, an accessible knob is important. Around 36% of consumers prioritise direct volume control above all else.
Checking in mono Check that mono works on the listening output you use. A mono-summed subwoofer output isn’t the same as a mono button for the main monitors. If you want to hear how the choir mix sounds when the left and right channels are combined, a suitable mono function can help. Around 29% of consumers put mono monitoring at the top of their list.
Connections and routing Note your interface’s outputs, the monitor inputs, connector types, and how many sources and pairs of speakers you’ll connect. If you need to connect equipment using specific plugs or connections, check these before choosing. Suitable connections are a top priority for around 21% of consumers.
Quiet listening on headphones Check whether the exact model has a headphone output with level control. Only look for cue selection if you need that route. If you want to work without speakers, make sure you know where to plug in your headphones and adjust the volume. Headphone listening is the top priority for around 14% of consumers.

Pitfalls to avoid when buying

  • Buying a second device when your interface already does the job

    An audio interface and software may already provide the basic functions you need. An extra controller would then mainly add another device and more connections to your workspace.

    First, work out which control or listening route you’re missing, then check what your current interface can already do.

    You’ll also need to allow for extra connections and desk space.

  • Mistaking a passive monitor controller for a headphone amplifier

    Features vary by model. ESI says the MoCo doesn’t have a built-in headphone amplifier; Mackie lists no headphone output or USB interface for the Big Knob Passive.

    Check headphone, cue and recording features separately for the exact model. If needed, use your interface’s headphone output.

    If you want to work on headphones, you may need a separate, suitable output.

  • Assuming more outputs mean better-matched connections

    The number of outputs doesn’t determine whether a controller works with your connectors and signal path. ESI states that the MoCo doesn’t convert an unbalanced signal to balanced.

    Map out your signal chain and count the sources, pairs of speakers and headphone routes you’ll actually use.

    An incompatible connection may mean you need different cables or leave some routes unused.

Brands to consider

Mackie

The Big Knob Passive is designed for hands-on control and switching between two sources and two pairs of monitors. The Big Knob Studio and Studio+ are separate models with recording interface features.

  • Mackie specifies mono, mute and dim for the Big Knob Passive.
  • According to Mackie, this model has no headphone output or USB interface. This limitation doesn’t automatically apply to other Big Knob models.

Behringer

The STUDIO M is designed for passive control of two stereo sources and two speaker outputs.

  • Behringer specifies mono, mute and dim for this model.
  • Check that the 6.3 mm connections are compatible with your equipment.

ESI

The MoCo is a passive controller for switching between sources and speakers, with features including an XLR output.

  • ESI specifies mono and mute.
  • ESI states that the MoCo has no headphone amplifier and doesn’t convert an unbalanced signal to balanced.

Palmer

The MONICON XL is designed for setups with multiple pairs of monitors, headphone routes or a separate cue.

  • Palmer specifies three speaker outputs, two adjustable headphone outputs and a correlation meter.
  • You may not need this much routing if you only use volume and mono.

Audient

The Nero is designed for a workspace with multiple sources, pairs of monitors and headphone routes.

  • Audient specifies four headphone outputs, three stereo speaker outputs, cue, talkback, mono and dim.
  • These features don’t automatically make this model a better choice if you only need volume and mono.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Do you need a monitor controller as well as your audio interface?

Not necessarily. If your interface and software already give you practical control over volume, mono and the listening routes you need, you can keep using your current setup. A separate controller is most useful for controls or routes you’re currently missing.

How do you connect a basic passive monitor controller?

Place the controller in the appropriate analogue listening path between your audio source, such as an interface, and your active monitors. Compare the inputs, outputs and cables on the exact devices beforehand; ESI states that the MoCo doesn’t convert an unbalanced signal to balanced.

Can you connect headphones to any passive monitor controller?

No. ESI states that the passive MoCo doesn’t have a built-in headphone amplifier. If needed, use your interface’s headphone output or check whether the exact controller model has one of its own.

Does a monitor controller need a CE mark?

It depends on the product regulations that apply to the specific device. The Dutch government says that manufacturers must establish whether a product meets the requirements and whether CE marking is required. Check which rules apply to the model, especially if you’re buying from outside the EU.

What are your rights when buying online in the Netherlands?

When you buy online as a consumer from a business, you’ll often have a 14-day cooling-off period, although exceptions may apply. Your statutory rights if a product is faulty are separate from any additional guarantee offered by the seller.