First, check whether your audio interface already has an accessible volume control and the mono monitoring you need. If it does, you may not need a separate monitor controller, as Sound On Sound explains in its guidance on DAW and audio interface features. If you mainly want a physical volume knob without using another power socket, look for a passive model with connections that suit your equipment. For headphone monitoring, Bluetooth or subwoofer control, weigh up the extra features against the power they require.
Who might need a monitor controller?
Editor with limited power sockets
If you edit choir recordings using an existing interface and speakers, a passive controller can give you physical volume control without needing its own power supply. Mackie and Palmer describe passive models for this kind of setup.
Editor who checks mixes in mono
If you want to hear how a stereo mix sounds when the left and right channels are combined while you edit, look for a genuine mono switch. Mackie and Palmer list this feature on specific models.
Editor who needs another listening option
If you want to control headphones, a Bluetooth source or a subwoofer as well as your speakers, compare the specific features and power requirements. PreSonus lists these kinds of extra features for the MicroStation BT.
What should you look for?
Keep using your existing audio interface
Choose this if: your interface is within easy reach and already provides the volume control, mono monitoring and listening options you need.
Bear in mind: the controls available may depend on your interface and DAW. Check your own setup before buying extra equipment.
A passive controller
Choose this if: you mainly want a physical volume knob, perhaps with mono, mute, dim or switching functions, without the controller needing its own power supply.
Bear in mind: a passive model does not automatically include an amplified headphone output or a separate cue mix. Check the connections too.
A powered controller
Choose this if: a headphone or aux output, Bluetooth or subwoofer control is important to the way you work.
Bear in mind: the PreSonus MicroStation BT needs USB power. Its USB-C connection does not carry audio, and PreSonus states that a USB power adapter is not included.
| What to consider |
What should you check? |
Who should pay particular attention? |
| Controls without another power socket |
Check whether the specific model is passive and what volume, mute or dim controls it offers. |
If I want a physical volume knob while editing without using another power socket, I’ll focus on passive models; around 36% of consumers prioritise controls that need no power. |
| Mono and level control |
Check whether the mono switch combines the stereo channels and whether mute or dim controls are available separately. iZotope explains how the left and right channels are combined in mono. |
If you want to quickly check how a stereo choir mix sounds in mono, a suitable mono switch can help; around 29% of consumers prioritise mono monitoring. |
| Connections to your interface and speakers |
Compare the inputs and outputs, and the number of sources and speaker pairs. The Palmer MONICON S G2 uses RCA; the MONICON M G2 has balanced XLR/TRS inputs, among other connections. |
If I want to connect my existing interface and speakers without a mismatch, I’ll compare their connections first; around 21% of consumers prioritise connection compatibility. |
| Extra listening option |
Check whether you need a headphone output or a separate cue mix, and how the controller is powered. PreSonus specifies that the USB-C connection on the MicroStation BT is for power only. |
If I want to control headphones or a subwoofer as well as my speakers, I’ll check which features and power supply are needed; around 14% of consumers prioritise an extra listening option. |
What to watch out for
-
Assuming a passive volume control is a headphone amplifier
A passive speaker controller is not necessarily suitable for driving headphones. Mackie states that the Big Knob Passive has no headphone output.
Decide in advance whether you only need to control speakers or also need a headphone output, and check the features of the exact model.
-
Confusing USB power with USB audio
On the PreSonus MicroStation BT, USB-C is for power, not audio from a computer.
Before buying, check both the analogue audio cables and the USB power available to you.
PreSonus states that a USB power adapter is not included, so you’ll need to provide a suitable power source yourself.
-
Comparing controls without checking the full signal path
The Palmer MONICON S G2 uses RCA inputs and outputs, while the MONICON M G2 has different connection options. Behringer states that the alternative inputs and outputs on the MONITOR1 are not intended for simultaneous use.
Note down the connections on your interface, controller and speakers, then check the signal path for each channel before choosing a model.
Brands to consider
Mackie
The Big Knob Passive is designed for a passive setup where you want to switch between sources or pairs of monitors.
- Mackie lists mono, mute, dim and switching between two sources and two pairs of monitors.
- Don’t expect a headphone output on this model; check that its connections suit your equipment.
Palmer
The MONICON S G2 is a passive stereo setup with RCA connections; the MONICON M G2 provides a single signal path with balanced connections among other options.
- Palmer specifies a passive design and mono for both models. For the M G2, Palmer also lists separate dim and mute buttons.
- Check the connections on your existing setup: the S G2 uses RCA inputs and outputs, while the M G2 has different inputs and outputs.
Behringer
The MONITOR1 is a passive volume controller for a single speaker path.
- Behringer lists mono and mute, with alternative connections for different signal paths.
- The alternative inputs and outputs are not intended for simultaneous use; the model does not list a dim or speaker A/B function.
PreSonus
The MicroStation BT is a powered option for anyone who needs extra listening features.
- PreSonus lists a headphone/aux output and Sub Bypass.
- USB-C provides power only and does not work as an audio interface; a USB power adapter is not included.
Joybuy products
Related products will be available soon.
Frequently asked questions
Where should you connect a passive monitor controller?
Place it in the appropriate analogue signal path between your audio interface and active speakers. Compare the connections at both ends and turn the monitoring volume down before using the setup for the first time. A controller does not replace your audio interface.
Can you record audio via USB-C with the MicroStation BT?
No. PreSonus says USB-C on the MicroStation BT is for power only, and connecting it to a computer does not turn the device into a USB audio device. You’ll still need a suitable, separate audio path for recording.
How should you use and maintain a monitor controller during long editing sessions?
Start with the monitoring volume low and avoid listening at high levels for long periods. The World Health Organization highlights the importance of both sound level and exposure time. Mackie recommends cleaning the Big Knob Passive with a dry cloth and keeping it away from water.
What are your rights when buying online in the Netherlands?
According to the Dutch government, when you buy from a business as a consumer at a distance, you generally have a 14-day cooling-off period, with some exceptions. The legal guarantee also gives you the right to a product that works as it should; in the Netherlands, there is no fixed statutory guarantee period. Consider business purchases separately.
What product regulations apply to a controller with Bluetooth?
The exact conformity rules depend on the product. Business.gov.nl refers to the Radio Equipment Directive for equipment with Bluetooth, so check which rules apply to the specific model.