Who is a monitor controller for?

Editor at a shared desk

Wants volume control, mute and mono within reach while editing, without automatically needing multiple speaker pairs. Palmer describes these features for the MONICON M G2, while Sound On Sound discusses the benefits of direct hardware control at a desktop workstation.

Editor with two monitoring setups

Switches between sources or speaker pairs and needs to check how many stereo inputs and independently selectable outputs the chosen model has. Mackie describes this switching capability for the Big Knob Passive.

Collaborating editor or recording engineer

May need separate headphone feeds for colleagues; talkback is most relevant if the workstation is also used to communicate with performers during recording. PreSonus and Audient describe headphone routing and talkback for their respective models.

What should you look for?

First, map out the routes from your interface to your speakers and headphones. Then choose only the extra switching or communication features that suit your shared workstation.

Consideration What should you check? Who is this important for?
Direct level control Check whether the exact model offers volume, mute, dim and mono, and whether its controls are easy to reach. If I want to adjust the volume quickly while editing and use mono or mute, direct control and easy access matter. Around 36% of consumers say level control is their top priority.
Switching between sources or speaker pairs Count the stereo inputs and independently selectable stereo outputs; don’t count a headphone output as a speaker output. If I want to compare two sources or speaker pairs without swapping cables, I look at the switching options available. Around 29% of consumers say switching between sources or monitoring setups is their top priority.
Quiet group listening Check the number of headphone outputs, connector size, individual level controls and any Main/Cue selection. If colleagues need to listen along on headphones at the same time, I need separate listening routes. Around 21% of consumers say independent headphone listening is their top priority.
Talkback and cue Find out whether the workstation is also used for recording and how talkback is routed to the performers’ feed. If I need to communicate with performers during a recording session, I check that the talkback route suits the setup. Around 14% of consumers say recording communication is their top priority.

Common pitfalls

  • Mistaking a second speaker output for a headphone output

    Being able to switch between two speaker pairs doesn’t mean several colleagues can each have their own headphone feed. Mackie lists no headphone output for the Big Knob Passive.

    Before buying, map out the routes from the interface to the speakers and to each pair of headphones separately.

    If there’s no separate headphone route, you may need a dedicated headphone amplifier or another routing solution for that listening task.

  • Choosing talkback just because you’re recording a choir

    Talkback is useful when the same workstation is also used to communicate with performers during a recording session; for editing alone, that route isn’t necessarily needed.

    Only choose talkback if the workstation will actually be used for recording or cueing.

    Unused features add connections and controls without helping with editing alone.

  • Treating general conformity information as confirmation for a specific product

    The product rules and conformity information that apply relate to the device actually being offered; a brand or model name alone doesn’t establish these details.

    When considering a specific product listing in the Netherlands, check the version and relevant conformity information. Where the rules require CE marking, it must be correctly applied and accompanied by an EU Declaration of Conformity.

Brands to consider

Palmer

The MONICON M G2 is designed as a compact, passive controller for a single stereo setup.

  • Palmer specifies mono, dim and mute, balanced XLR/TRS inputs and XLR outputs, plus 3.5mm connections.
  • The single stereo input and output listed don’t offer the A/B routing of a controller designed for two speaker pairs.

Mackie

The Big Knob Passive is designed for switching between two sources and two speaker pairs.

  • Mackie lists mono, mute and dim on the Passive, alongside 2×2 switching.
  • According to Mackie’s model comparison, the Passive has no headphone output or USB interface; features of the Studio and Studio+ models don’t automatically apply to this model.

PreSonus

The Monitor Station V2 is designed for a workstation with separate headphone feeds and, optionally, talkback.

  • PreSonus specifies four individually controlled headphone outputs with Main/Cue selection, three stereo speaker outputs and built-in talkback.
  • The extra routing is only relevant if you’ll use those features at your shared workstation.

Audient

Nero is designed for more extensive routing for speakers, headphones and talkback.

  • Audient specifies three stereo speaker outputs, four flexibly routed headphone outputs and internal or external talkback.
  • Check in advance whether you need this routing at your workstation; brand claims about sound or accuracy aren’t independent performance measurements.

Behringer

STUDIO M is a passive source and monitor switcher.

  • Behringer lists source and monitor switching, mono, mute and dim for STUDIO M.
  • Talkback on the separate CONTROL2USB range isn’t a feature of STUDIO M.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need a monitor controller as well as my audio interface?

Not necessarily. First check whether your interface already has an easy-to-reach volume control and all the listening routes you need. A separate controller is most useful if you want physical controls within reach, extra source or speaker switching, or a separate cue route.

Can I use a passive controller to listen on headphones with two colleagues at the same time?

Don’t assume so: check the connections on the exact model. Mackie lists no headphone output for the Big Knob Passive, while PreSonus specifies four individually controlled headphone outputs on the Monitor Station V2.

How do I connect a simple controller to my interface?

First, check the interface’s stereo output and your speakers’ connections, then choose a controller with compatible inputs and outputs. Palmer lists balanced XLR/TRS inputs and XLR outputs for the MONICON M G2, alongside 3.5mm connections. When switching users, turn the volume down and use mute before changing any cables.

Which product rules apply to an electrical monitor controller sold in the Netherlands?

The relevant European product rules apply to electrical and electronic equipment. Where those rules require CE marking, the device must be correctly marked and accompanied by an EU Declaration of Conformity; the exact rules depend on the device. Check the information for the specific version being offered.

What warranty and cooling-off period apply to an online purchase as a consumer in the Netherlands?

With normal use, the seller must provide an appropriate solution if a product doesn’t meet what you could reasonably expect from it. ACM ConsuWijzer describes this as the statutory guarantee, which has no fixed statutory time limit. A standard online consumer purchase usually also comes with a 14-day cooling-off period from delivery, subject to applicable exceptions.