Start with your existing audio interface and speakers, then consider where you want to reach the volume control when standing. For one pair of speakers, a simple controller with an accessible volume control and the mono and mute functions you need may be enough. Extra inputs and outputs or a headphone amplifier are mainly useful if you’ll use them. Before buying, check the connections, power requirements and cable clearance with the desk at both its lowest and highest positions.
Who might find a monitor controller useful?
Choir editors using a sit-stand desk
If you edit while standing, you’ll want to adjust playback volume without reaching for your interface or mouse. Bax Music highlights easy access as one reason to use a monitor controller. Positioning and cable routing also matter with an adjustable desk.
Editors checking in mono and stereo
If you want to switch between stereo and mono while editing, you’ll need a model with a dedicated mono switch. Mackie and Drawmer list this feature on the Big Knob Passive and CMC2 respectively.
Users with multiple monitoring options
If you switch between pairs of speakers, a subwoofer or headphones, check which outputs can be switched independently. Drawmer and Audient describe models with several monitoring options.
What should you look for when choosing one?
| What to consider |
What should you check? |
Who is this important for? |
| Accessible volume control |
Decide where to position the controller and test the cable route with the desk at its highest and lowest settings. Check that its inputs and outputs are compatible with your existing equipment. |
When I’m editing standing up, I want to adjust the volume without reaching for my interface, and the control needs to stay within reach at both desk heights. Around 36% of consumers give accessibility their top priority. |
| Mono monitoring |
Look for a dedicated mono switch on the exact model. Don’t confuse it with a mono output for a subwoofer. |
When checking a stereo mix, I want to be able to listen in mono quickly without changing the playback route in software. Around 29% of consumers prioritise mono monitoring. |
| Switching between monitoring options |
Count your speaker pairs and check separately whether there’s a subwoofer output and whether it can be switched. |
If I switch between speaker pairs or a subwoofer while editing, I want the right outputs for the job. Around 21% of consumers say switching between monitoring options is their main priority. |
| Headphones and extra sources |
Check whether the model has a headphone output with its own control, what power supply it needs, and whether an extra source needs to connect by cable or Bluetooth. |
If I listen on headphones as well as speakers, or use a phone as an extra source, these connections matter. Around 14% of consumers prioritise headphone use or an extra source. |
Common buying mistakes
-
Mistaking a mono subwoofer output for a mono monitoring control
A subwoofer connection doesn’t replace the function that lets you check the full stereo monitoring signal in mono.
Check the specifications for the exact model for a mono switch and a subwoofer output separately.
-
Confusing USB-C with a USB audio connection
PreSonus says the MicroStation BT’s USB-C connection is for power only. It won’t appear as an audio device on your computer.
Before assuming the controller can replace your current interface, compare the manual for the exact model with the connections on your equipment.
You may still need a separate audio interface for computer audio alongside the MicroStation BT.
-
Securing cables without testing the desk’s movement
If the control unit and connection box are separate, the cable route needs to stay clear as the desk moves up and down.
Test the route with the desk at both extremes before securing the cables permanently.
Depending on where you place your equipment, you may need suitable audio cables that are longer or routed differently.
Brands to consider
Mackie
The Big Knob Passive is designed for straightforward passive control. According to Mackie, the Big Knob Studio adds a USB audio interface and talkback.
- Mackie says the Big Knob Passive lets you choose between two sources and two monitor pairs, with mono, mute and dim functions.
- The Big Knob Passive has no headphone output. Don’t choose the Studio version solely for USB or talkback if you already have those features.
Drawmer
The CMC2 is designed for a set-up with two monitor pairs, a subwoofer and headphones.
- Drawmer specifies mono, polarity reversal, dim, mute and a headphone control for the CMC2, along with two stereo monitor outputs and a switchable subwoofer output.
- Check whether you actually need the extra outputs and features, and whether the connections suit your set-up.
TC Electronic
The MONITOR PILOT separates the control unit from the connection box, allowing you to operate the controls away from the connections.
- TC Electronic says this model supports up to three stereo speaker pairs.
- Check that the connecting cable stays clear with the desk at both its lowest and highest positions. Don’t assume the model has a mono function unless its specifications say so.
PreSonus
The MicroStation BT is designed to work with a wired interface, a phone as a source and a separately switchable subwoofer.
- PreSonus lists Bluetooth and Sub Bypass on the MicroStation BT.
- According to PreSonus, USB-C is for power only, not USB audio. Bluetooth isn’t essential if you only use your wired interface.
Audient
Nero is designed for set-ups that use several speaker and headphone options.
- Audient specifies three stereo speaker outputs and four headphone outputs for Nero.
- Check whether you need the extra options before choosing a model with these connections.
Products at Joybuy
Related products coming soon.
Frequently asked questions
Can you use a monitor controller directly as a USB audio interface?
It depends on the model. Mackie lists a USB audio interface for the Big Knob Studio, while PreSonus says the MicroStation BT’s USB-C connection is for power only. Check the full model number before planning to replace your existing interface.
How do you connect a monitor controller to an adjustable desk?
Match the outputs on your audio interface to the controller’s inputs, then match the controller’s outputs to your speakers. Next, plan a cable route that stays clear when the desk is at either extreme. With the MONITOR PILOT, you can position the I/O box separately from the control unit.
How do you look after a passive monitor controller?
Follow the manual for the exact model. Mackie recommends cleaning the Big Knob Passive with a dry cloth.
Do EU rules apply to a monitor controller with Bluetooth?
Radio equipment placed on the EU market is covered by the Radio Equipment Directive. CE marking is only required when specific harmonised EU rules say it is required for the product. Check which product documentation applies to the particular model.
Are you always entitled to exactly two years of legal guarantee in the Netherlands?
No. The Dutch government states that the Netherlands has no fixed legal guarantee period: you’re entitled to a product that works for the length of time you could reasonably expect it to. If there’s a problem, the seller must provide a solution; a manufacturer’s warranty is separate.