Who might need a monitor controller?

Demo maker with limited sockets

You already have an audio source or interface and active speakers, and mainly want to adjust your listening volume without needing an extra power socket for the controller.

Editor checking audio in mono

You want to adjust the volume, mute, dim or mono settings while editing, without reaching for your software. The number of sources and speaker pairs you have will determine whether switching functions are useful for your setup.

Songwriter who also records

When recording, you may need a separate headphone output or recording function. If so, check whether a powered device offers these features and what your existing interface can already do.

What should you look for when buying?

First, decide whether you only need passive volume control. Then count the listening routes and recording features you’ll actually use.

What to consider What should you check? Who is this important for?
No extra power socket Check that the exact model is passive and doesn’t need its own power supply. Remember that your source and any active speakers will still need power. If I already have an interface and active speakers on my desk, I want to use the controller without setting aside another socket. Around 36% of consumers want to avoid the need for extra power.
Controls while editing Compare the features you need: volume, mono, mute and dim controls don’t work the same way on every model. While editing, I want to adjust the volume and access mono, mute or dim controls straight away, without going into the software for every check. Around 29% of consumers prioritise direct control.
Connections and switching Make a note of your source and speaker connections, and decide whether you want to switch between sources or monitor pairs. With one source and one pair of monitors, I want connections that suit my existing setup; extra switching options are only useful if I’ll use them. Around 21% of consumers consider connections or switching essential.
Headphones and recording Check whether you need a headphone output, a USB audio interface or just a USB power connection. If I also record a songwriter or want to listen through headphones separately, the controller needs to offer that feature. Around 14% of consumers prioritise extra headphone or recording features.

Buying pitfalls

  • Assuming a passive controller is an audio interface

    A passive controller adjusts an existing analogue signal path. That doesn’t automatically mean you can use the controller itself to record.

    Before buying, decide whether you only want to control your listening setup or also record through the device.

  • Confusing USB-C with USB audio

    According to PreSonus, the USB-C connection on the PreSonus MicroStation BT is for power only, so it doesn’t add a USB audio interface.

    Check whether each port supports power, audio or both.

  • Choosing more speaker outputs than you need

    A model that switches between two pairs of monitors doesn’t give you an extra listening route if you only have one pair.

    Count your current sources and speaker pairs, and only note upgrades you genuinely expect to use.

  • Not comparing connections in advance

    According to their manufacturers, the Omnitronic VC-11 and Palmer MONICON M G2 offer different connection options. A controller needs to fit between your source and your speakers or amplifier.

    Map out your signal path and compare the connectors on each device before choosing a model.

Brands to consider

Omnitronic

According to Omnitronic, the VC-11 is a passive controller for an existing analogue source and speakers or amplifier.

  • Omnitronic says the VC-11 needs no power and offers mono and mute functions.
  • The controller attenuates the signal rather than amplifying it. Check that its 6.3 mm outputs are compatible with your speaker connections.

Palmer

According to Palmer, the MONICON M G2 is designed for one stereo source and one stereo listening route, with connection options including XLR/TRS and 3.5 mm.

  • Palmer specifies a passive controller with mono, dim and mute functions.
  • According to Palmer, this model has one stereo output. Don’t choose it if you want to switch between two pairs of monitors.

Mackie

Within the Big Knob range, Mackie says the Passive is designed for two sources and two pairs of monitors. The Studio adds features including USB recording and headphone functions.

  • The Big Knob Passive is a good fit if you want to switch between two sources and two pairs of monitors without using a controller that needs its own power.
  • The Studio and Passive offer different features. Check which model you need and what your existing interface already does.

Behringer

Behringer positions the passive MONITOR1 for a single listening route and the passive STUDIO M for switching between two sources and two pairs of speakers.

  • According to Behringer, the product specifications distinguish between a single route and a setup with two sources and two pairs of speakers.
  • According to the product information, the MONITOR1 doesn’t have a dim button. The STUDIO M may offer more than you need if you only use one source and one pair of speakers.

Radial Engineering

Radial describes the SAT-2 as a passive stereo attenuator that can be used as a monitor controller between an audio interface and one pair of active speakers.

  • Radial says it offers mute, mono and dim controls without needing its own power supply.
  • The monitor setup described is designed for one pair of speakers. Check that it offers the features you’re looking for.

PreSonus

According to PreSonus, the MicroStation BT is designed for people who want Bluetooth, a headphone output or subwoofer control alongside their existing analogue computer audio.

  • PreSonus describes extra listening options, including a headphone output and subwoofer control.
  • According to PreSonus, USB-C provides power only and doesn’t connect to your computer for audio.

Joybuy products

Related products coming soon.

Frequently asked questions

How do you connect a passive monitor controller?

Place the controller in the analogue signal path between your existing audio source or interface and your speakers or amplifier. Compare the inputs and outputs on your devices first, as connections vary between models.

Do you need an extra power socket for a passive monitor controller?

According to their manufacturers, the Mackie Big Knob Passive and Omnitronic VC-11 don’t need their own power supply. Your audio source and any active speakers will still need to be powered separately.

Can the USB-C connection on the PreSonus MicroStation BT record audio?

No. According to PreSonus, the USB-C connection is for power only, so it doesn’t provide a USB audio connection to your computer.

What should you do when maintaining the device or if it develops a fault?

Follow the instructions for your exact model. For example, Mackie says to clean the Big Knob Passive with a dry cloth only. If a product is faulty, the retailer is your point of contact for your statutory guarantee rights in the Netherlands, according to the Rijksoverheid (Dutch government). There is no fixed statutory guarantee period.

What cooling-off period applies to an online purchase?

For online purchases from a business, a 14-day cooling-off period applies in many cases, according to the Rijksoverheid (Dutch government). The rules described for distance purchases don’t apply when buying from a private individual.