Who is a monitor controller for?

Mixer with one stereo pair

You mix at a single desk using an existing audio interface and mainly want direct volume control and a mono button.

Mixer who compares monitor setups

You want to switch between two pairs of speakers or sources to hear the same mix on different setups.

Recording musician who needs a headphone mix

You also record musicians or use headphones, so separate level control or talkback may be important to you.

What should you look for when choosing one?

Start with the connections and number of speaker pairs you need. Then add only the features you’ll actually use while mixing or recording.

What to consider What to look for Who is this important for?
Connections and volume Note down the connections on your interface and speakers, then compare them with those on the controller. Palmer lists one stereo input and one stereo output for the MONICON M G2. If I mix at my desk using one stereo pair, I want direct volume control that works with my existing equipment. Around 40% of consumers prioritise compatible connections and simple volume control.
Mono and speaker comparison Check for mono, mute and dim controls, and count your sources and speaker pairs. Mackie lists these features and support for two monitor pairs on the Big Knob Passive. If I want to check my demo in mono or switch between speaker pairs, I need those controls. Around 30% of consumers prioritise mix checking and comparing monitor setups.
Headphones and talkback Check how many headphone outputs there are, and whether the model offers separate level control or talkback. Audient lists four headphone outputs and talkback for the Nero. If I record vocals or instruments, I want to check how the headphone mix is controlled and whether communication features are needed. Around 20% of consumers prioritise recording and headphone features.
Subwoofer or extra source Check whether you need a separate subwoofer output or an extra playback source. PreSonus lists Sub Bypass and Bluetooth for the MicroStation BT; according to PreSonus, USB-C is for power only. If a subwoofer or mobile playback source is part of my setup, I want to know what controls and connections are available for it. Around 10% of consumers put an extra source or subwoofer feature at the top of their list.

Common buying mistakes

  • Assuming every Big Knob is also a recording interface

    According to Mackie, the Big Knob Passive has no USB I/O or headphone output; you can’t assume other versions have the same features.

    Before buying, check the full model name and the features of that exact version.

    If you also need USB recording, you may have to use a separate audio interface.

  • Mistaking a USB-C port for an audio connection

    According to PreSonus, the USB-C connection on the PreSonus MicroStation BT is for power only and doesn’t appear as an audio device.

    Check separately how the controller is powered and which connections carry the audio signal.

    You may need a suitable analogue cable or a separate interface for the audio connection.

  • Buying more routing than your desk setup needs

    Extra speaker or headphone outputs won’t solve a connection problem if your interface and speakers aren’t compatible with the controller.

    First sketch out your existing signal path, then count how many inputs and outputs you actually need.

Brands to consider

Mackie

The Big Knob Passive is designed for switching between sources and speakers, without a built-in audio interface.

  • Mackie lists two sources, two monitor pairs, and mono, mute and dim functions for the Passive.
  • Mackie lists no headphone output for this model; don’t confuse it with the Big Knob Studio versions.

Palmer

The MONICON M G2 is designed for a compact passive stereo setup, while the MONICON L G2 offers extra routing options.

  • Palmer lists mono, dim and mute functions for the M G2.
  • The M G2 has one stereo output; features of the L G2 aren’t automatically included on the M G2.

Drawmer

The CMC2 is designed for a desk setup with two stereo pairs, a subwoofer and a headphone mix.

  • Drawmer specifies separate switches and mix-checking features for the CMC2.
  • Check that the extra routing options suit your existing equipment and workflow.

PreSonus

The MicroStation BT is designed for one pair of active speakers, optionally with a subwoofer, and a mobile Bluetooth source.

  • PreSonus lists Sub Bypass and analogue inputs for the MicroStation BT.
  • PreSonus states that USB-C on this model is for power only and doesn’t carry USB audio.

Audient

The Nero is designed for a more extensive monitoring and recording setup, with multiple headphones and talkback.

  • Audient specifies three stereo speaker outputs, four headphone outputs and talkback for the Nero.
  • If you’re the only listener and use one stereo pair, you may not need the extra connections.

Monitor controllers at Joybuy

Related products will be available soon.

Frequently asked questions

Can I connect a monitor controller directly to my computer instead of using an audio interface?

It depends on the model. Mackie distinguishes between the Big Knob Passive, which has no USB I/O, and the Big Knob Studio, which does. According to PreSonus, USB-C on the MicroStation BT is for power only. So check where the audio signal comes from and which connections are available on the version you’ve chosen.

What should I bear in mind when connecting and cleaning it?

First, compare the connections on your interface and speakers with those on the controller. Mackie recommends cleaning the Big Knob Passive with a dry cloth only; for other models, follow the instructions in the relevant manual.

Who should I contact in the Netherlands if a product develops a fault after purchase?

For a consumer purchase, the seller is required by the Dutch government to offer a solution if a product is faulty; the manufacturer’s warranty is in addition to the statutory guarantee. For distance purchases, you’ll usually also have a 14-day cooling-off period, subject to exceptions.