Bassist with one pair of monitors
You edit bass tracks at a small desk and want to check the monitoring volume and mono sum straight away.
If your audio interface already has an easy-to-reach volume control and you use one pair of speakers, you may not need a separate monitor controller. A controller is most useful if you want physical mute, dim or mono controls. For quiet listening, check that the model really has a headphone output. A subwoofer output can make switching easier, but it won’t solve room resonances or unreliable bass reproduction.
You edit bass tracks at a small desk and want to check the monitoring volume and mono sum straight away.
You want to switch quickly from speakers to headphones. Check that the controller has a dedicated headphone output.
You use an extra pair of speakers or a subwoofer and want to select or switch them off independently.
Choose this if: you use one source and one pair of speakers, and can already adjust the volume easily on your audio interface.
Bear in mind: you won’t gain physical mono, dim or speaker switching controls.
Choose this if: you want an easy-to-reach volume knob and mono control, but don’t need a headphone output on the controller.
Bear in mind: check that the connections are compatible. A passive controller doesn’t replace the recording functions of an audio interface.
Choose this if: you want to switch off the speakers to listen through headphones, or switch off an existing subwoofer separately.
Bear in mind: the PreSonus MicroStation BT has a headphone/aux output and Sub Bypass, but no separate mono button. USB-C is for power only.
Choose this if: you genuinely use multiple sources, pairs of speakers or independent headphone routes.
Bear in mind: extra routing takes up more space and requires more cables. These features won’t improve your room acoustics.
First check whether your audio interface already offers the volume control you want. Then choose only the extra switches or outputs that your setup is missing.
| What to consider | What should you check? | Who is it for? |
|---|---|---|
| Quick volume adjustments | An easy-to-reach volume control and, if you want them, mute or dim controls. Also check what your interface already offers. | If I want to adjust the monitoring volume quickly while editing, I look for a control within easy reach. Around 25% of consumers prioritise direct volume control. |
| Checking a bass track in mono | A clearly specified mono or mono-sum function. If you have multiple pairs of speakers, check how many can be switched independently. | I want to hear the stereo sum of my bass track quickly without mistaking a button for a change in how my room sounds. Around 25% of consumers prioritise mono compatibility. |
| Listening without speakers | A clearly specified headphone output and the option to switch off the speakers while listening through headphones. | If I want to keep working during quiet times, I need a suitable headphone route. Around 19% of consumers prioritise listening without speakers. |
| Connections | The output from your audio interface, the inputs on your speakers, and the number of sources and pairs of monitors you want to connect. | I want to connect the controller to my existing equipment without overhauling the signal chain. Around 19% of consumers say compatible connections matter most. |
| Subwoofer or extra pair of monitors | A clearly specified subwoofer output with bypass, or enough switchable monitor outputs. Also allow for the power supply and space for cables. | If I already use a subwoofer or an extra pair of monitors, I want to manage that route separately. Around 12% of consumers prioritise additional monitoring routes. |
Room resonances can colour low frequencies, whatever volume control you use.
Choose a controller based on its controls and connections. Assess bass reproduction separately in your existing monitoring setup.
Mackie doesn’t list a headphone output for the Big Knob Passive, whereas PreSonus does for the MicroStation BT.
Check the exact version and make sure you can keep listening through headphones when the speakers are switched off.
PreSonus says the USB-C port on the MicroStation BT is for power only and doesn’t carry computer audio.
If you want to record audio from your computer, you’ll need a separate audio interface if you don’t already have one. Don’t assume a USB port provides USB audio.
An advanced controller isn’t automatically useful if you have just one pair of monitors; you may not use the extra connections.
First, list your sources, connection types, pairs of speakers and headphones. Then decide how much routing you need.
The Big Knob Passive is a passive option for switching between sources and pairs of monitors.
The MONITOR1 is a passive option for one pair of speakers, with mono and mute controls among its features.
The MicroStation BT offers a headphone/aux route and Sub Bypass; the Monitor Station V2 is designed for more advanced monitoring setups.
The MONICON M G2 is a compact passive option for one source and one pair of monitors; the MONICON L G2 offers more source and output routes.
Not necessarily. If your interface already gives you easy access to the volume control and headphone route you want, a separate controller should add a specific function, such as a physical mono sum or switching between pairs of monitors. A passive controller doesn’t replace the interface’s recording functions.
First check the outputs on your audio source and the inputs on your active speakers, then connect the controller between them using suitable cables. Check the instructions for the exact model: Behringer says the MONITOR1’s combo inputs and 3.5mm input must not be used at the same time.
No. Sub Bypass can switch off a subwoofer for comparison, but low frequencies are still affected by speaker placement and room resonances. So assess your entire monitoring setup.
No. PreSonus says USB-C on this model is for power only, and the device won’t appear as an audio device on your computer when connected through this port.