Editing bass guitar tracks with a subwoofer
You want to switch between stereo and an existing subwoofer route when checking low frequencies, while taking the room’s influence into account.
Start with your audio interface, speakers and available desk space. For a single pair of speakers, a compact controller with direct volume control and mono is often enough. Choose subwoofer control, a headphone output or extra speaker routes only if you need them in your existing setup. None of these features can, on its own, correct changes to bass response caused by the room.
You want to switch between stereo and an existing subwoofer route when checking low frequencies, while taking the room’s influence into account.
You already have an audio interface and a pair of speakers, but want volume and mono controls close at hand without extra routes you won’t use.
You often work on headphones and want to know whether the listening route you need and the speaker mute function work independently of each other.
Start by choosing the connections and listening routes you’ll actually use. Extra controls are only useful if they suit your setup.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Checking bass with and without a subwoofer | Check that the controller and subwoofer have compatible connections, and that you can mute the subwoofer separately. | If you’re checking bass guitar tracks with an existing subwoofer, you’ll want to listen quickly with and without it, while taking the room into account. Around 36% of consumers list comparing bass with and without a subwoofer as their main need. |
| Controls and desk space | Measure the available space, including room for cables, and check that the inputs and outputs are compatible with your interface and speakers. | For a small workspace with one pair of speakers, an accessible volume knob and mono control may be enough. Around 29% of consumers prioritise compact, direct controls. |
| Listening on headphones | Check which control switches off the speakers and whether the headphone output remains active. | If you often edit on headphones, you’ll want to be able to switch off the speakers without losing your headphone signal. Around 21% of consumers prioritise this listening route. |
| Multiple sources or pairs of speakers | Count the stereo inputs and independently switchable stereo outputs you need. Also check that the signal type is compatible throughout your setup. | If you want to switch between existing sources or pairs of speakers, it’s important that the controller supports those routes. Around 14% of consumers list extra switching routes as their main need. |
PreSonus describes Sub Bypass as a feature that mutes the subwoofer output. That’s not the same as bass management or room-response correction; Genelec points out that the room and speaker placement affect how you hear bass.
Choose subwoofer control so you can compare the sound with and without the sub, but also check the low frequencies from your listening position and make sure any subwoofer you have is properly set up.
Mackie lists no headphone output or USB audio interface for the Big Knob Passive. PreSonus says that the USB-C connection on the MicroStation BT is for power only.
Before buying, note which headphone, recording and speaker routes you need, and check the features of the exact model.
If your audio interface doesn’t provide the feature you need, you may need additional equipment.
ESI says that the MoCo doesn’t convert an unbalanced signal to a balanced one. So the type of connector alone doesn’t tell you what kind of signal passes through the entire connection.
Check the signal type at both ends of the chain and make sure the controller has the connections you need.
If the connections aren’t compatible with your setup, you may need different cables or another device.
The MONICON S G2 is designed for a compact RCA stereo setup; the MONICON M G2 offers more direct controls for a single stereo route.
The Big Knob Passive is designed for switching between sources or pairs of speakers, with mono, dim and mute controls close at hand.
The MicroStation BT is designed for a stereo setup with a subwoofer, Sub Bypass and a headphone/aux output.
The MoCo is a passive controller for two stereo inputs and two controllable stereo outputs, with features including mono and left/right swapping.
The Nero is designed for setups with multiple speaker, subwoofer and headphone routes.
No. A monitor controller controls or routes the monitoring signal, but it can’t correct the influence of your room on its own. Genelec explains that the room and speaker placement affect how you hear bass. Use Sub Bypass to compare the sound with and without a subwoofer, not as proof of automatic room correction.
First compare the outputs on your audio interface with the controller’s inputs, then check the controller’s outputs against your speakers. On the MicroStation BT, Main Out On/Off switches off the main speakers and subwoofer for listening through Aux Out/Phones; according to PreSonus, the general Mute control mutes all outputs.
No. PreSonus says that USB-C on the MicroStation BT is for power only and doesn’t work as an audio connection to a computer. Check the power supply too: according to the manufacturer, a USB power adapter isn’t included.
When you buy as a consumer in the Netherlands, you’re entitled to a product that conforms to the agreement. The Dutch government says that if there’s a problem, the seller—not just the manufacturer—must provide a solution. For many applicable distance sales from a business, you have a 14-day cooling-off period. Check the terms that apply to your order.
That depends on the exact product and the rules that apply to it. The European Commission says CE marking is only required for products covered by EU rules that call for it. For a specific electrical or wireless model, ask for the relevant conformity information; a CE logo is not an independent certification of sound quality.