Who is this for?

Editors with one pair of speakers

You want direct control of volume, mute and mono while editing, with your audio interface already taking care of the other tasks. Mackie and Palmer describe these control functions for their monitor controllers.

Editors who compare with a subwoofer

You use, or are considering, a stereo-plus-subwoofer setup and want to be able to switch the sub off separately. PreSonus describes a Sub Bypass function for this; subwoofer placement and calibration still matter too.

Editors with multiple monitoring routes

You want to switch between multiple pairs of speakers or need more than one headphone route. Check the number of inputs and outputs: Mackie, Heritage Audio and Audient offer different routing options.

What to consider when choosing

Start with the controls and monitoring routes you’ll actually use while editing, then check that the connections are compatible with your existing equipment.

What to consider What to look for Who is this important for?
Direct control Check that the model has volume control and the mute and mono functions you want, and find out which outputs those functions affect. If I want to switch quickly between stereo and mono while editing, I want direct control of volume and mute. Around 33% of consumers in this use case prioritise direct control.
Comparing with a subwoofer Check for a separately switchable subwoofer route; this isn’t the same as automatic bass correction. When I use a subwoofer or want to add one, I want to listen with and without it. Around 25% of consumers say this is their main requirement.
Connections Compare the connector types with those on your interface and active speakers. Also check whether a USB connection carries audio or only supplies power. If I want to keep using my existing equipment, I need to know whether the signal path and connections are compatible. Around 25% of consumers put compatibility first when choosing.
Additional monitoring routes Count the pairs of speakers and headphones you need, and check whether the headphone outputs can be used independently. When I want to switch between additional pairs of speakers or need multiple headphones, I don’t want to have to add those routes later. Around 17% of consumers prioritise additional monitoring routes.

Common pitfalls

  • Mistaking a subwoofer output for automatic bass correction

    A controller may let you switch the subwoofer on and off, but your room and the sub’s calibration still affect what you hear.

    Start by assessing your existing monitors and listening space. Calibrate any subwoofer you use according to its model’s manual.

  • Assuming every USB port carries computer audio

    According to PreSonus, the USB-C port on the PreSonus MicroStation BT is for power only; it doesn’t work as an audio device for your computer.

    Check whether your chosen model includes an audio interface. For computer recording or playback, take into account the audio interface you already use.

  • Assuming a speaker controller replaces every monitoring route

    A controller for speaker pairs doesn’t automatically provide the headphone routes you need. According to Audient, the Audient Nero has four headphone outputs; check which routes are available on other models.

    Before buying, count the pairs of speakers and headphones you use separately, and check which functions your existing interface already provides.

Relevant brands and models

Mackie

The Big Knob Passive is designed for direct control and switching between stereo sources and pairs of speakers.

  • Mackie lists mute, mono and dim as direct control functions.
  • Check that the number of source and speaker outputs suits your setup.

Palmer

The MONICON M G2 is designed for passive control of a single stereo speaker route.

  • Palmer specifies balanced XLR/TRS inputs, XLR outputs, and mono, dim and mute functions.
  • A single stereo output doesn’t let you switch between multiple pairs of speakers.

PreSonus

The MicroStation BT is suited to a stereo setup with a separately switchable subwoofer.

  • PreSonus specifies Sub Bypass and balanced TRS main outputs.
  • According to PreSonus, the USB-C connection is for power only. The Monitor Station V2 is a different model; PreSonus describes its output C as a subwoofer route.

Heritage Audio

The Baby RAM is a passive controller with two pairs of stereo inputs and outputs.

  • Heritage Audio lists mute, dim and mono; according to the manufacturer, the model doesn’t need a power supply.
  • Check separately which headphone and talkback functions you need, and how you’ll provide them in your existing setup.

Audient

The Nero is designed for setups with multiple speaker, subwoofer and headphone routes.

  • Audient specifies three stereo speaker outputs, an assignable subwoofer output and four headphone outputs.
  • Decide whether you’ll actually use these additional routes, and plan how to connect your existing equipment.

Monitor controllers for this use

Related products will be available soon.

Frequently asked questions

Do I always need a subwoofer output for bass guitar tracks?

No, not if you don’t use or plan to use a subwoofer. A switchable subwoofer route is useful when you want to compare your sound with and without a sub, but it won’t automatically correct the effects of placement or room resonances.

Can I use the PreSonus MicroStation BT as an audio interface via USB-C?

No. According to PreSonus, the USB-C connection is for power only, and the MicroStation BT doesn’t appear as an audio device on your computer.

How should I set up a subwoofer in my workspace?

Assess its placement and calibration from your own listening position. For subwoofer setups, Genelec advises taking room resonances, level, phase and the crossover to the main monitors into account. Also follow the manual for your specific subwoofer model.

What are my rights when I buy a monitor controller online in the Netherlands?

For online consumer purchases, ACM ConsuWijzer says you generally have up to 14 days after delivery to change your mind, subject to legal exceptions. This is separate from your right to a product that meets the required standards: the Dutch government says there is no fixed statutory guarantee period in the Netherlands. Check who the seller is and which terms and conditions apply to your order.