Mixing vocals from one listening position
You mix existing backing vocals and want volume, mono, dim and mute controls close at hand, without needing extra recording features.
For mixing existing backing vocals, a simple monitor controller may be all you need if you already have a suitable audio interface and mainly want quick access to volume, mono, dim and mute controls. Extra headphone outputs or talkback are most useful if you also record singers and want to give them a separate monitor mix. At a sit-stand desk, also check that the controls are within reach and that the cables work in both desk positions.
You mix existing backing vocals and want volume, mono, dim and mute controls close at hand, without needing extra recording features.
You switch between speakers, sources or a subwoofer. At an adjustable desk, it’s also important that the controls and cables remain usable as the desk changes height.
As well as controlling your own speakers, you may need a separate headphone mix and talkback to guide a singer during recording.
Start with your existing signal path and the controls you’ll actually use while mixing. Extra connections are only useful if they suit the way you work.
| What to consider | What to check | Who is this important for? |
|---|---|---|
| Mono and level controls | Check the exact model to see whether it has mono, dim and mute controls, and where they’re positioned on your desk. | If I’m mixing existing vocal tracks, I want to check mono and the level directly. Around 36% of consumers prioritise mono and level controls. |
| Controls and cables | Check the knob’s reach, cable lengths and clearance for plugs at both the lowest and highest desk positions. | At a sit-stand desk, I want the volume control to be easy to reach and the cables to remain usable as the desktop moves. Around 29% of consumers prioritise desk layout and cabling. |
| Sources and outputs | Count the sources, pairs of speakers and any subwoofer you’ll actually connect, then compare these with the connections on the exact model. | If I switch between sources, speaker pairs or a subwoofer, I want the right listening routes available. Around 21% of consumers prioritise switching between listening routes. |
| Headphones and talkback | Check how many headphone outputs you need to use at once and whether cue and talkback can be routed to the outputs you want. | If I also record a singer, a separate headphone mix with communication can be useful. Around 14% of consumers prioritise a singer cue. |
Mackie distinguishes between the Big Knob Passive and the separate Studio models. The Passive has no headphone output.
First decide whether you’ll only be mixing existing tracks or also want to give a singer their own listening route. Then compare the full model name and connections.
You may need an additional solution to provide a separate feed for a singer.
PreSonus states that the MicroStation BT’s USB-C connection is for power only and doesn’t carry computer audio.
Check separately which connections carry audio and which are only for power.
You’ll still need your existing audio interface if the controller doesn’t receive computer audio.
The models covered use different combinations of TRS, XLR, AUX and subwoofer connections. An output is only useful if it suits your equipment and signal path.
Map out the connections from your interface to the controller and speakers, then check the cable route at both desk heights.
You may need different connection cables, depending on your equipment.
The Big Knob Passive is designed for straightforward passive switching. Mackie distinguishes it from the Big Knob Studio and Studio+, which are separate models with USB audio interfaces.
The Baby RAM is a passive controller for anyone who wants to use two stereo input and output pairs over TRS.
The MONICON L G2 is designed for a setup with extra sources, two stereo speaker outputs, a mono output and headphone controls.
The Nero is designed for recording setups that need multiple speaker and headphone routes, cue or talkback.
The MicroStation BT is designed for a compact speaker pair, with an optional subwoofer route and Bluetooth as an extra source.
Not necessarily. Check which equipment in your setup handles the computer signal and recording. Mackie distinguishes the passive Big Knob Passive from the Big Knob Studio and Studio+, which are separate models with a USB audio interface.
Check the connections on the exact model and plan the cable route from your interface to the controller and speakers. Before buying, make sure the controls remain within reach and that cables and plugs have enough clearance at both the lowest and highest desk positions.
No. According to PreSonus, USB-C on the MicroStation BT is for power only; the computer won’t recognise it as an audio device.
They’re most useful if you record singers and want to give them a separate headphone mix or a way to communicate. Audient lists a cue input, four headphone outputs and talkback for the Nero. Check that these routes suit your audio interface and recording setup.