Who is this relevant to?

Solo mixer with active speakers

You mix layered backing vocals at a single desk and want to adjust the level straight away and check the sound in mono quickly. You won’t necessarily need a second recording interface.

Headphone mixer in a shared room

You often work on headphones and want to check in advance that the controller has a usable headphone output and suitable controls. Speaker control alone won’t be enough.

Student recording vocalists

Alongside your own monitoring, you want to be able to adjust what the singer hears during a recording, and may also need talkback. Check how the cue routing works.

What should you look for?

What to consider What should you check? Who is this important for?
Volume control and mono Check whether the model has mono, mute or dim controls, and whether its inputs and outputs are compatible with your interface and active speakers. When I’m mixing solo, I want to adjust the level straight away and assess the backing vocals in mono too. Around 36% of consumers give these controls top priority.
Headphone monitoring Check how many headphone outputs there are, whether each has its own level control, and whether you can still use them when the speakers are off. When I need to work quietly, I want to assess my mix on headphones without relying on speakers. Around 29% of consumers prioritise headphone monitoring.
Listening setup for a vocalist Check whether Main and Cue can be selected separately, how many levels can be adjusted independently, and where talkback is routed. When I’m recording a singer, I want to control what they hear and communicate with them during the session. Around 21% of consumers say monitoring for a vocalist is their main requirement.
Connections and extra features Compare your interface’s outputs with your speakers’ inputs, and decide whether you need a USB audio interface or just volume control. When I want to keep using my existing equipment, I need compatible connections and don’t want features my interface already provides. Around 14% of consumers base their choice mainly on connections and avoiding unnecessary features.

Common mistakes

  • Confusing a mono button with a separate mono output

    A mono button can combine the stereo signal into mono, but that doesn’t automatically give the controller an extra physical output for a separate mono speaker.

    Decide whether you simply want to listen to the stereo mix in mono or connect a separate mono speaker, then check the model’s connection diagram.

  • Choosing a passive volume controller for a singer’s headphone mix

    Basic passive models are designed for speaker control. PreSonus specifies an individual level control and Main/Cue selection for each headphone output on the Monitor Station V2, so a headphone socket alone doesn’t guarantee a separate listening mix.

    Count how many people will be listening at once, and check whether each person can select their preferred source and set their own volume.

  • Assuming that models in the same range have the same features

    Mackie describes the Big Knob Passive as a passive monitor controller, while the Big Knob Studio has a recording interface and talkback.

    Check the full model name against the features your audio interface already provides before choosing.

Brands to consider

Mackie

The Big Knob Passive is designed for passive source and speaker control; the Big Knob Studio is a separate model with recording features.

  • Mackie says the Big Knob Passive has mono, mute and dim controls, with no active electronics in the signal path. The Big Knob Studio has two independently adjustable headphone outputs, a recording interface and talkback.
  • Don’t assume the Big Knob Passive has the recording and headphone features of the Studio.

Behringer

The MONITOR1 is designed for passive volume control of a single stereo pair, with mono and mute.

  • Behringer specifies XLR/TRS combo inputs and XLR outputs.
  • This model doesn’t offer the independent headphone routes or talkback you may need for a recording session with a vocalist.

Palmer

The MONICON M G2 is a compact passive controller for a single stereo source and one stereo pair.

  • Palmer specifies XLR/TRS and 3.5mm connections, with mono, dim and mute.
  • Its specified inputs and outputs are more limited than those of controllers designed for multiple pairs of speakers.

PreSonus

The MicroStation BT offers compact control with Bluetooth; the Monitor Station V2 is designed for more advanced monitoring with multiple headphones and cue selection.

  • According to PreSonus, the Monitor Station V2 has four headphone outputs, each with Main/Cue selection and its own level control, plus talkback.
  • According to PreSonus, the MicroStation BT’s USB-C connection is for power only and doesn’t function as a USB audio interface.

Audient

The Nero is designed for a setup with multiple pairs of speakers, headphones and assignable talkback.

  • Audient specifies three stereo speaker outputs and four headphone outputs.
  • These connections and listening features are most relevant if you need them in your own setup.

SPL

The 2Control is designed for two stereo speaker pairs and two independently adjustable headphones.

  • SPL specifies analogue line-level connections, adjustable crossfeed and an additional mono output.
  • The crossfeed feature alone doesn’t prove that your mix will translate better to speakers.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Do I need a monitor controller if my audio interface already has a volume knob?

Not necessarily. If your interface’s controls, headphone routing and connections meet your needs, a second controller may add little. Compare the features if you want to switch between speakers directly or check your mix in mono.

How do I connect a basic passive controller?

Place the controller in the analogue signal path between your audio interface’s outputs and your active speakers’ inputs, provided the connections are compatible. The Palmer MONICON M G2, for example, has a balanced XLR/TRS combo input and balanced XLR outputs. Check which cables your equipment needs too.

Can I record audio directly with a USB-C cable connected to the PreSonus MicroStation BT?

No. According to PreSonus, the MicroStation BT’s USB-C connection is for power only; the device won’t appear as an audio interface on your computer through this connection.

How can I avoid listening at an unnoticed high volume during long headphone sessions?

Start at a low volume, take breaks and keep an eye on both the sound level and how long you’ve been listening. The World Health Organization gives 80 dB for up to 40 hours a week as an example of safe exposure; the position of a volume knob doesn’t tell you the actual sound level.

What are my rights when buying online in the Netherlands?

For eligible consumer purchases made at a distance, you generally have a 14-day cooling-off period, although exceptions may apply depending on the circumstances and the seller. Products must also be of satisfactory quality: if something is faulty, contact the seller to put it right. The Dutch government states that the Netherlands has no fixed statutory guarantee period.