Who is this relevant to?

Producer with one pair of speakers

You mix using two computer screens and mainly want direct control over listening volume, mono and mute, without paying for features your interface already offers.

Mixer with reference speakers

You switch between two stereo pairs or audio sources while mixing. The deciding factors are the actual audio outputs and source selection, not the number of screens.

Producer with a subwoofer or separate headphone mix

You want to switch a subwoofer independently or use a separate headphone path. Check the routing on the exact model to make sure it supports this.

What should you look for?

First, count your audio sources and speaker pairs. Then check which features your interface already offers and which connections your equipment needs.

What to consider What should you check? Who is this most important for?
Direct listening controls Check whether mono and mute, and possibly dim, are available, and whether your interface already offers these features. If I want direct control over volume, mono or mute while mixing, I look for these features on the device. Around 36% of consumers give direct listening controls top priority.
Switching between audio paths Map out your current and planned audio paths; count stereo sources and speaker pairs separately. If I want to switch between actual audio sources or speaker pairs while mixing, I check for the relevant inputs and outputs. Around 29% of consumers say switching between audio paths is their main consideration.
Connections and interface Compare the connectors and signal paths of your interface, controller and speakers. Also check whether unbalanced signals are converted if you need them to be. If I want to connect my existing equipment without relying on the wrong signal path, I check the specifications of each device. Around 21% of consumers prioritise having the right connections.
Separate subwoofer or headphone path Check whether the subwoofer output can be assigned separately, how many headphone outputs there are and which signals you can route to them. If I need a separate subwoofer path or headphone signals for several listeners, I check the routing on each model. Around 14% of consumers are mainly looking for these extra paths.

Avoiding common buying mistakes

  • Confusing two computer screens with two pairs of speakers

    A monitor controller switches audio sources and listening outputs; your screen setup doesn’t determine how many of these you need.

    First, count your audio sources and speaker pairs separately.

  • Assuming every passive controller can drive headphones

    ESI states that the MoCo doesn’t have a built-in headphone amplifier. Mackie states that the Big Knob Passive doesn’t have a headphone output.

    Check the headphone path on the exact model and on your existing interface.

  • Assuming the connector shape means the signal is converted

    ESI states that the MoCo doesn’t convert an unbalanced input signal to balanced.

    As well as checking the plugs, check the specified signal type for the inputs and outputs.

  • Mixing up specifications for models in the same range

    Mackie distinguishes the Big Knob Passive from the Big Knob Studio, which has a USB interface and headphone outputs.

    Compare the full model name and the features you need, not just the range name.

Brands and specific models

Mackie

The Big Knob Passive is designed for passive switching between two stereo sources and two speaker pairs.

  • Mackie says the Big Knob Passive has mono, mute and dim functions.
  • According to Mackie, this model doesn’t have a headphone output. The Big Knob Studio is a different model, with a USB interface and headphone outputs.

ESI

The MoCo is a passive controller for switching between two stereo sources and two stereo outputs, with a range of connection options.

  • ESI lists mono, mute and left-right swapping as features.
  • According to ESI, the MoCo doesn’t have a headphone amplifier and doesn’t convert an unbalanced signal to balanced.

Palmer

The MONICON L G2 is designed for two stereo sets, a separate mono output and a headphone output.

  • Palmer lists AUX and Bluetooth for the L G2.
  • According to Palmer, Bluetooth and the headphone amplifier, among other features, require power. These features apply to the L G2 and not automatically to other MONICON models.

Audient

According to Audient, the Nero has three stereo speaker outputs and an assignable subwoofer output.

  • Audient lists four headphone outputs and mono, dim and polarity controls.
  • The more extensive routing is only useful if you actually need it; having two computer screens doesn’t, by itself, make it necessary.

PreSonus

The Monitor Station V2 is designed for multiple audio sources and up to three stereo pairs of speakers.

  • PreSonus lists separate Main and Cue selection for each headphone output.
  • Before buying, check that you’ll use the extra paths and can supply the necessary signals; these features are specific to the V2.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Do you need two speaker outputs for two computer screens?

No, not just because you have two screens. Count your audio sources and speaker pairs; an extra speaker output is useful if you want to switch between two stereo sets.

Where do you connect the controller?

First, work out which audio output on your interface goes to the controller and which controller output goes to your speakers. Then compare the connectors and balanced or unbalanced signal paths on the exact devices. ESI states that the MoCo doesn’t convert an unbalanced signal to balanced.

Can you connect headphones to a passive ESI MoCo?

No, according to ESI, the MoCo doesn’t have a built-in headphone amplifier. For headphone monitoring, use a suitable output elsewhere in your setup or choose a model with this feature.

What are your rights when buying online in the Netherlands?

For a standard online consumer purchase, you generally have 14 days from delivery to change your mind, subject to exceptions explained by ACM ConsuWijzer. You also have a legal guarantee if, under normal use, a product doesn’t do what you could reasonably expect; this is not the same as a fixed two-year guarantee period.