Who is this lighting for?

Creator of close-up painting tutorials

Wants to keep the model, brush tip and moving hand clearly in shot without distracting shadows on the workpiece. Canon Europe explains how, in close-ups, light can cast a shadow on or behind the subject.

Creator explaining paint colours

Wants to compare colour nuances on video, so pays attention to both the light’s stated colour-rendering performance and the camera’s white balance. Canon Europe highlights how white balance affects the way colours appear in a recording.

Painter with a small filming space

Needs to fit a light, camera and hands around the same worktable, and considers mounting options, available space and power supply.

What should you look for?

Start with the position and direction of your key light: these determine how you illuminate the model and your working hand without spilling unnecessary light onto the dark background.

Adjustable desk-mounted LED panel

A good fit if: you always film in the same workspace and want to attach a light beside or above the table. Elgato lists a desk clamp as included with the Key Light Air MK.2.

Bear in mind: the clamp needs to fit your desk, and the power supply you choose must support the brightness you want. Elgato says the maximum light output varies depending on the power source.

COB video light with a modifier

A good fit if: you want to light the model separately and position the light in relation to a dark background. Aputure and Godox list adjustable colour temperature for the amaran 60x S and Godox ML60II Bi respectively.

Bear in mind: you’ll need space to position the light and should check which modifier, adapter and mount are compatible with the version you’re considering. Without careful positioning, a directional light source can create unwanted shadows.

Compact battery-powered light

A good fit if: you have limited setup space or shoot short clips from different angles; a compact light can be considered as a fill or accent light.

Bear in mind: battery life depends on the light and settings you choose. A small light’s stated output doesn’t prove that it will be sufficient as the only key light in every setup.

What to consider What should you check? Who is this important for?
Detail and hand shadows Check whether you can point or move the light and whether a suitable diffuser or modifier is available. Film while moving your hand as if you were painting. When I film brushwork up close, I don’t want my hand to obscure important details. Around 36% of consumers focus above all on visible detail without distracting hand shadows.
Paint colours Compare the colour-rendering figures for the exact version, set the white balance for the lighting you’re using and make a test recording. When I explain subtle paint shades, I want them to remain recognisable in the recording. Around 29% of consumers give the highest priority to recognisable paint colours.
Space and power Measure the available space and desk edge, and check the included mount, power supply and expected run time. When I need to fit a light, camera and hands around one small worktable, I want to know whether the mount and power supply suit my setup. Around 21% of consumers focus above all on space, mounting and recording time.
Banding in the image Before a long recording, shoot a short video using your intended dimmer setting and camera settings, then check the footage for banding. When I record a tutorial, I don’t want to discover visible banding after filming is finished. Around 14% of consumers give footage without banding the highest priority.

Common pitfalls

  • Comparing lux figures without considering distance or modifiers

    A stated light output doesn’t automatically tell you how evenly the whole work area will be lit. For the amaran 60x S, Aputure publishes different figures depending on the distance and whether the reflector is used.

    Only compare figures measured under the same conditions, then make a test recording showing the model, your hand and the background together.

    You may need a suitable diffuser, reflector or mount to achieve the light distribution you want; check whether it’s included with the version you’re buying.

  • Assuming a high CRI guarantees true-to-life paint colours

    How colours look on video also depends on the light’s colour temperature and the camera’s white balance. A CRI or TLCI figure alone can’t confirm how paint colours will appear in your recording.

    Check the specifications for the exact version of the light, set the white balance to suit the lighting and record a test video showing the paint colours you want to feature.

  • Assuming a clamp, power supply and modifier are always included

    What’s in the box varies by version. Elgato lists a desk clamp for the Key Light Air MK.2, but no suitable adapter or power bank for use without a compatible USB-C power supply. SmallRig says a specific charger for the RC 60B must be bought separately.

    Before ordering, check what’s included with the exact kit and which connections or accessories your setup requires.

Relevant brands to consider

amaran

The amaran 60x S is an example of an adjustable bi-colour COB light for a setup where you choose the direction of the light yourself.

  • For this model, Aputure lists 2700–6500 K, CRI 97 and TLCI 97.
  • The stated lux figures depend on distance and whether the reflector is used; the light has active cooling. These manufacturer specifications alone can’t predict the result on your painting table.

Godox

The ML60II Bi is a compact COB option for anyone who wants to position the light and a compatible Godox modifier.

  • For the ML60II Bi, Godox lists an average CRI of at least 96, an average TLCI of at least 97 and a colour temperature of 2800–6500 K.
  • The manufacturer lists a mains adapter and optional battery solutions; check the version and the accessories you’ll need. These specifications don’t automatically apply to the older ML60Bi.

Elgato

The Key Light Air MK.2 is a panel for a fixed filming space, supplied with a desk clamp.

  • Elgato lists adjustable light from 2900–7000 K and an included desk clamp.
  • The stated maximum light output varies depending on the power rating. According to the product specifications, a suitable adapter or power bank for use without a compatible USB-C power supply isn’t included. This applies to the MK.2, not the original Key Light Air.

SmallRig

The RC 60B is a portable COB option for anyone who wants to change the angle of the light between shots.

  • For the RC 60B version reviewed, SmallRig lists a built-in battery and USB-C PD power.
  • The manufacturer lists up to 45 minutes of use at full power and says a specific charger must be bought separately. Check the version and what’s included in the kit.

Ulanzi

The VL49 RGB is a small, portable light to consider as a nearby fill or accent light.

  • For the VL49 RGB, Ulanzi lists a 2000 mAh battery, a 1/4-inch mounting point and a maximum of 800 lux at 0.5 m.
  • That light output doesn’t prove that one unit will cover an entire painting space as the key light in every setup. Don’t confuse this RGB version with other VL49 models.

Video lights at Joybuy

This selection includes COB video lights and compact battery-powered lights for directing or moving light when filming painted models.

COLBOR W60R video light, 60W RGB

COLBOR W60R Video Light, 60W RGB

Adjustable colour temperature and brightness give you options for tailoring the light to your recording.

60 W; CCT 2700–6500 K; dimmable from 0–100%; CRI 97+. The description lists control via an app or buttons.

View at Joybuy
COLBOR 60W LED video light with built-in 59 Wh battery

COLBOR 60W LED Video Light, 59Wh Battery

The built-in battery is a handy option if you don’t want to rely on mains power while filming.

60 W; 59 Wh battery; colour temperature 2700–6500 K; CRI 96+. The description lists up to one hour of use at 60 W. Battery use requires a 60 W PD charger with 20 V/3 A, as well as the stated USB-C to USB-C cable.

View at Joybuy
Ulanzi VL81 rechargeable LED video light

Ulanzi VL81 Rechargeable LED Video Light

The built-in battery and cold-shoe mount are useful if you want to attach a compact light to a portable filming setup.

81 LEDs; adjustable colour temperature from 3200–5600 K; USB-C charging. Keep the light and connections dry, avoid prolonged direct exposure to the LED light and ensure ventilation at maximum power.

View at Joybuy
Ulanzi VL49 RGB video light with 2000 mAh battery

Ulanzi VL49 RGB Video Light, 2000 mAh

This compact battery-powered light is worth considering as a portable fill or accent light; the specifications don’t prove that one unit will cover every painting space as the key light.

2000 mAh battery; RGB; adjustable colour temperature from 2500–9500 K; dimmable. Use a standard 5 V adapter, keep the light dry and don’t look directly into the LED from close range.

View at Joybuy
Ulanzi VL119 10W RGB light wand

Ulanzi VL119 10W RGB Light Wand

The built-in battery and 1/4-inch mounting point are useful for a portable setup.

10 W; adjustable colour temperature from 2500–9000 K; 120° beam angle; CRI 95. The stated run time is at least 60 minutes at maximum brightness, with a charging time of around 2.5 hours.

View at Joybuy

Frequently asked questions

Do you need to light the entire dark set?

No, not if you’ve chosen a dark background deliberately. Start with the model and your working hand; point or move the light, then check in a test recording how much light reaches the background. A modifier can change how the light is distributed, but the result depends on your setup.

Why do paint shades look different on video from how they look on your worktable?

How colours look on video depends, among other things, on the lighting and the camera’s white balance. Set the white balance to match the lighting you’re using and compare a test recording; a stated CRI or TLCI figure alone can’t confirm how the paint colours will appear on screen.

How can you check for banding before a long recording?

Make a short recording using the light setting and camera settings you plan to use, then play it back and check for banding. Sony explains that adjusting the shutter setting can help in some situations; which setting works depends on the camera and light source.

Which accessories should you check when buying a video light?

For each version, check whether an adapter, compatible modifier, tripod or battery is included and whether the connections suit your setup. Elgato says that the Key Light Air MK.2 doesn’t include a suitable adapter or power bank for use without a compatible USB-C power supply.

What should you look for in a video light for the Dutch market?

Check that the exact version meets the product rules that apply to it. According to Your Europe, the official EU information service, the applicable requirements depend on the product; CE marking is not a general, independent approval. For ordinary online consumer purchases, you’ll usually have 14 days from delivery to change your mind, subject to legal exceptions. ACM ConsuWijzer explains this period for consumers in the Netherlands.