Detail-focused documenter
You want to capture engravings, wear or small features on medals clearly. So compare the macro lens’s magnification and the space available in front of the lens.
When photographing medals, first look at the magnification and working distance of the individual macro lens: the camera body alone does not determine how large an engraving appears in the frame. A stable set-up can help with focus stacking, but make sure you leave room for lighting on a shared workbench too. Canon and OM SYSTEM list stacking features for specific bodies, but the lens and exact combination remain key.
You want to capture engravings, wear or small features on medals clearly. So compare the macro lens’s magnification and the space available in front of the lens.
You set up your equipment from scratch each time and need room for the camera, lighting and a stable surface. The Canadian Conservation Institute explains that raking light can emphasise texture and surface damage.
You may be buying a camera body and lens together for the first time. Check which lens comes with the version you choose: a kit zoom is not automatically the macro lens used as the basis for a macro comparison.
A good fit if: you want to combine a focus bracket in-camera and are happy with a maximum magnification of 1:2. Canon lists focus bracketing and in-camera stacking for the EOS R10.
Trade-off: the RF 35mm is a separate lens and does not offer 1:1 magnification, so check whether it can achieve the framing you want.
A good fit if: 1:1 magnification for small details is important and you can work close to the medal. Sony specifies 1:1 magnification for the SEL30M35.
Trade-off: Sony gives a working distance of around 2 cm from the front of the lens at the closest focusing distance, leaving little room for lighting.
A good fit if: you are considering a Z system with a separate 1:1 macro lens. Nikon specifies around 5 cm between the front of the lens and the subject at the closest focusing distance.
Trade-off: allow for the space needed by both the body and lens, and check the focus-stacking features available with this exact combination.
A good fit if: you want to include a separate 1:1 macro lens and Focus Stacking in your workflow. OM SYSTEM lists Focus Stacking for the body and 1:1 magnification for the lens on a Micro Four Thirds sensor.
Trade-off: check that the stacking feature you want works with the lens and body you have chosen.
| Consideration | What should you check? | Who is this important for? |
|---|---|---|
| Magnifying small details | Compare the maximum magnification of the separate macro lens and the distance from the front of the lens to the medal. | If I want to capture small engravings clearly, the magnification needs to suit the detail I want to show. Around 33% of consumers put magnifying details at the top of their list. |
| Lighting and working space | Check the working distance in front of the lens and whether there is room for lights and a stable surface alongside the camera. | When I set up my equipment from scratch on a shared workbench each time, I want enough room for lighting and a stable base. Around 27% of consumers give set-up space and lighting top priority. |
| Sharpness across raised details | Check whether the exact body and lens support the focus bracket and stacking you want, and set aside a stable place for the camera. | If I want to capture raised details sharply from front to back, I want to know whether my chosen combination supports focus bracketing. Around 20% of consumers prioritise sharpness across raised details. |
| Complete set | Check the exact lens model and what is included with the body; factor in a tripod if you need one. | When I buy a body and lens together for the first time, I want to know in advance which parts will complete my macro set-up. Around 20% of consumers give a complete set top priority. |
The magnification figures quoted apply to specific, separate macro lenses and do not automatically apply to a kit zoom lens.
Before buying, check the exact version, the lens included and its magnification. Compare the body and lens as a set.
You may need a separate macro lens to get the magnification you want; focus stacking also requires a stable set-up.
Minimum focusing distance is measured from the sensor; working distance describes the space between the front of the lens and the subject.
Check whether there will be enough room for lighting on your shared workbench at the working distance you plan to use.
Movement between shots can make it harder to combine a focus stack. Canon recommends using a sturdy tripod for focus stacking to prevent movement between images.
Check the features available on the exact body and set aside a stable spot on the workbench for the full sequence.
A sequence consists of several shots, so it takes extra time and needs a place where the set-up can remain stable throughout the shoot.
The EOS R10 can be paired with the separate RF 35mm F1.8 MACRO IS STM for photographing medals.
The α6400 with the separate SEL30M35 is an E-mount combination with a 1:1 macro lens.
The Z50II is a DX body; the NIKKOR Z MC 50mm f/2.8 is a separate Z macro lens.
The OM-5 Mark II and the separate M.Zuiko Digital ED 60mm F2.8 Macro make up a Micro Four Thirds option.
No, it depends on how large you want the medal or its smallest detail to appear in the frame. The Canon RF 35mm offers a maximum magnification of 1:2; according to their manufacturers, the separate Sony SEL30M35 and Nikon NIKKOR Z MC 50mm f/2.8 are 1:1 macro lenses.
Take test shots with the light in different positions. The Canadian Conservation Institute explains that raking light can emphasise texture and surface damage. Choose lighting that suits the purpose of the photograph, and keep your set-up consistent.
Hold the medal by its edges. The Canadian Conservation Institute recommends this approach for coins, medals and medallic art. If the item is fragile, also agree on how to handle it with its owner or collection manager.
When you buy online from a business as a consumer, you generally have 14 days to change your mind, although there are exceptions. The Dutch government states that there is no fixed statutory two-year guarantee; if a product is faulty, contact the seller. This does not automatically apply to business purchases.
It depends on the purpose and use of the images. According to the Dutch Data Protection Authority, identifiable people’s images are personal data; if you use or publish them for business purposes, you must take the GDPR into account. Images kept exclusively for private use may fall under the household exemption. Check the workshop’s rules too.