Match the camera and lens to what you want to capture: an overview shot calls for a different level of magnification than a tiny solder joint. Check that there’s also room for lighting and diffusion. If your components sit at different heights, focus stacking may be an option, but it requires a stable setup and a suitable workflow.
Who is this buying guide for?
Component documentation
You want to capture small labels, connections or solder joints individually. Start by checking the lens’s maximum magnification and mount compatibility. Manufacturers including Nikon, Sony, Fujifilm, OM SYSTEM and Canon list these specifications for each lens and system.
Circuit board overview photography
You want to photograph complete boards consistently, without distracting glare. Match the field of view to the size of your circuit board and consider where to position the lighting. Basler AG and Edmund Optics describe diffusion and light polarisation as techniques for dealing with reflective surfaces.
Photographing surface relief
You photograph circuit boards with components at different heights and want to decide whether taking multiple shots at different focus points will suit your workflow. Nikon describes focus stacking as a technique for combining sharpness across multiple focus planes; OM SYSTEM lists Focus Stacking as a feature of the OM-5 Mark II.
What should you consider when choosing?
| What to consider |
What should you look for? |
Who is this important for? |
| Fine details |
Check the maximum magnification of the exact lens and its mount. |
If I want to capture small components or solder joints, I first look at the magnification of the lens I’ll actually use. Around 33% of consumers prioritise this level of detail. |
| Reflections |
Consider whether you can move or diffuse the light; if needed, try a suitable polarisation setup. |
For shiny solder joints, I want to be able to adjust the lighting setup, because changing the camera won’t alter the direction of the light. Around 27% of consumers prioritise controlling reflections. |
| Sharpness at different heights |
Check the shooting features of the exact camera body and whether the images need to be combined afterwards. |
If both the circuit board and taller components need to be sharp, I want to know whether taking multiple shots at different focus points will suit my workflow. Around 20% of consumers give top priority to sharpness across different heights. |
| Complete setup |
Check whether the offer includes a body or kit, which lens is included and what studio equipment you still need. |
I want to know in advance which parts are included in the set and what I might need to buy separately. Around 20% of consumers prioritise the contents of an expandable set. |
Common buying mistakes
-
Assuming a camera kit is a complete macro setup
A kit may include a standard zoom lens, but maximum magnification depends on the lens. So a camera body on its own won’t tell you whether small components will appear large enough in the frame.
Check the exact kit contents and the specifications of the included lens. If it won’t capture the details you need, you may need to buy a separate macro lens.
A separate macro lens is an additional purchase and must be compatible with the camera mount.
-
Assuming greater magnification means fewer reflections
With reflective surfaces, how clearly you can see details also depends on the direction and spread of the light. Changing the magnification alone won’t alter the lighting setup.
Leave room to move the light and diffusion materials. Take test shots of your own circuit board: the effect will depend on the surface and the direction of the light.
Depending on your setup, you may need additional lighting, diffusion materials or polarising materials.
-
Confusing an equivalent figure with the actual reproduction ratio
For the M.Zuiko Digital ED 60mm F2.8 Macro, OM SYSTEM lists both 1:1 and ‘2×’ in 35mm equivalent terms. These figures do not describe the same ratio.
Compare macro lenses using their stated actual maximum reproduction ratio.
Camera brands to compare
Canon
The EOS R50 uses the RF mount and can be paired with RF and RF-S lenses.
- Canon lists a maximum magnification of 1.4× for the standalone RF 100mm F2.8L Macro IS USM.
- That magnification applies to the separate lens, not automatically to an R50 kit. The R50 does not support EF-M lenses.
Nikon
The Z-series Z50II can be paired with the separate NIKKOR Z MC 50mm f/2.8 macro lens.
- Nikon specifies a reproduction ratio of 1:1 for this macro lens.
- According to Nikon, when shooting close-ups the front of the lens can be just a few centimetres from the subject. Bear in mind how much room you’ll need for lighting.
Sony
The α6400 uses the E mount; the standalone FE 90mm F2.8 Macro G OSS is a macro option in this system.
- Sony specifies a maximum magnification of 1.0× and a minimum focus distance of 0.28 m for the lens.
- These specifications apply to the lens; check whether it’s included with the camera kit you choose.
Fujifilm
The X-S20 body can be paired within the X system with the XF80mmF2.8 R LM OIS WR Macro lens.
- Fujifilm specifies a maximum magnification of 1× and a focusing range from 25 cm for this lens.
- The lens specifications don’t mean it’s included with every X-S20 offer.
OM SYSTEM
The OM-5 Mark II features Focus Stacking in-camera and can be paired with the separate M.Zuiko Digital ED 60mm F2.8 Macro.
- OM SYSTEM lists an actual maximum magnification of 1:1 for the lens.
- The ‘2×’ figure for this lens is a 35mm equivalent, not a 2:1 reproduction ratio. Assess the camera feature and lens specification separately.
Joybuy cameras for circuit board photography
This selection includes Sony cameras: two kits with a 16–50mm zoom lens and one body without a lens. For close-ups of small components, check that the included lens offers the magnification you need; you may need to buy a macro lens separately.
No image available
Sony ZV-E10 with 16-50mm zoom lens
A good option if you’re looking for a camera with a zoom lens for overview shots; check that the lens suits the size of your board and the level of detail you need.
The product name lists a 16-50mm zoom lens.
View at Joybuy
No image available
Sony Alpha A6100 with 16-50mm f/3.5-5.6 OSS II
A good option if you’re looking for a kit with a zoom lens; check the field of view for your circuit board and whether the combination can show the finest details you want to capture.
The product name lists a 16-50mm f/3.5-5.6 OSS II lens.
View at Joybuy
No image available
Sony ZV-E10 body without a lens
A good option if you already have a compatible lens and want to put together your own setup for circuit board photography.
This is a body without a lens. Check that your lens fits the mount; you’ll need a separate lens to take photographs.
View at Joybuy
Frequently asked questions
Is a kit lens enough to photograph a whole circuit board?
It may be suitable for an overview shot, depending on the size of the circuit board and the available shooting distance. For small components, check the maximum magnification of the lens actually included; the camera body doesn’t determine this.
How do I get started with photographing a shiny circuit board?
Set up the camera and circuit board securely, then first adjust the position of the light or add diffusion. Basler AG describes diffusion for reflective surfaces; Edmund Optics discusses polarisation as a possible way to deal with certain reflections. Take test shots, as the result depends on the surface and the direction of the light.
Do I always need to use focus stacking?
No. Consider it when components at different heights aren’t sharp enough in a single shot. Taking multiple shots at different focus points requires a stable setup; check which shooting and image-merging options are available on the exact camera body.
What extra costs and warranty rights should I be aware of when buying online in the Netherlands?
Allow for the possible cost of a separate macro lens, as well as any lighting or diffusion materials your setup requires. The Dutch government states that if there’s a problem with a product, the seller must provide a solution. A 14-day cooling-off period applies to many distance purchases, although exceptions may apply.