Who is this buying guide for?

Photographers with a small work table

You want to frame your wooden miniature properly without the camera or lighting extending beyond the available space. So don’t just check the minimum focusing distance; also consider the space between the front of the lens and your subject. Sony and Nikon publish figures for both distances for the macro lenses mentioned here.

Photographers capturing woodcarving details

You want to capture grain, joints or finishes at a large enough size. Compare the maximum magnification of the specific lens instead; the word ‘macro’ alone doesn’t tell you how much of your subject will fill the frame. Canon, Sony, OM SYSTEM and Nikon publish magnification figures for the lenses featured in this guide.

Photographers of three-dimensional miniatures

You may want to keep details both in front of and behind your subject in focus. Decide whether a single shot will do or whether you want to use focus stacking, and check that your chosen method works with your exact camera and lens. OM SYSTEM and Canon describe features for the camera set-ups mentioned here.

What should you look for when choosing?

First, check that the lens leaves enough room on your table for the subject and lighting. Then compare magnification, focusing options and what you’ll need for a complete set-up.

Key consideration What should you check? Who is this important for?
Framing on a small table Measure to check that the camera, lens, miniature and lighting will all fit. Ask about the working distance at your preferred magnification; it isn’t the same as the minimum focusing distance. If my table has limited space, I want to know in advance whether the lens and lighting will fit around the miniature. Around 33% of consumers prioritise framing within the space available on their table.
Magnifying fine wood details Compare the maximum magnification of the exact lens on offer with the size of the detail. Canon lists a maximum magnification of 0.5× for the RF 35mm F1.8 MACRO IS STM; Sony and Nikon list 1:1 for the macro lenses mentioned here. If I want to capture tiny grain patterns or carving details so they fill the frame, I check the magnification of the lens in the set. Around 25% of consumers prioritise magnification for fine details.
Keeping details at different depths in focus Check that focus stacking or focus bracketing is supported by the specific camera body and lens. OM SYSTEM states that stacking on the OM-5 Mark II results in around 7% of the edge of the image being cropped after processing. If my miniature has details at different depths, I want to know whether my set-up can combine them in focus and how much space I need to leave around the subject. Around 25% of consumers prioritise sharpness across multiple depths.
The complete set-up Compare the camera body and compatible lens as a set, and check the packaging for any accessories you’ll need. OM SYSTEM states that an SD card and USB power adapter are not included with the OM-5 Mark II. If I want to put together a usable set-up for my miniatures, I check which components and lighting I still need. Around 17% of consumers focus mainly on the complete set and the essentials that come with it.

Common buying mistakes

  • Confusing focusing distance with the clear space in front of the lens

    The minimum focusing distance doesn’t tell you how much space there’ll be between the front of the lens and your subject. Sony lists a minimum focusing distance of 9.5 cm for the E 30 mm F3.5 Macro, and a working distance of 2.4 cm at the close-up setting mentioned here. That limited space can also affect where you can position your lighting.

    Measure your own set-up and check the working distance at the magnification you want to use.

  • Assuming every lens labelled ‘macro’ offers 1:1 magnification

    Magnification varies between lenses: Canon lists a maximum of 0.5× for the RF 35mm F1.8 MACRO IS STM, while Sony and Nikon specify 1:1 for the lenses mentioned here.

    Compare the specifications of the lens actually in your basket with the size of the wood detail you want to photograph.

  • Comparing the camera body alone

    You’ll need a suitable lens for close-ups. OM SYSTEM also states that an SD card and USB power adapter are not included with the OM-5 Mark II.

    Before buying, check what’s included in the specific box and make a list of the camera body, lens, memory card, power supply and lighting you’ll need.

  • Using focus stacking without allowing for the crop

    OM SYSTEM states that focus stacking on the OM-5 Mark II crops around 7% from the edge of the image.

    Leave space around the miniature when framing, and check that the feature works with the camera and lens combination you’re using.

Camera brands and macro set-ups

Sony

The Sony α6400 with E 30 mm F3.5 Macro is an APS-C E-mount combination for close-up photography.

  • Sony lists 1:1 magnification for the lens and a working distance of 2.4 cm at the close-up setting mentioned here.
  • The short working distance leaves little space in front of the lens. Bear this in mind when positioning your lighting. These are manufacturer specifications, not the results of an independent performance test.

OM SYSTEM

The OM-5 Mark II with M.Zuiko Digital ED 30 mm F3.5 Macro is a Micro Four Thirds set-up for which OM SYSTEM confirms in-camera focus stacking support.

  • OM SYSTEM lists a maximum magnification of 1.25× for the lens.
  • According to OM SYSTEM, focus stacking crops around 7% from the edge of the image. Allow for the crop and check which accessories aren’t included with the camera body.

Canon

The Canon EOS R50 with RF 35mm F1.8 MACRO IS STM is an RF set-up for close-ups where a maximum magnification of 0.5× may be enough.

  • Canon describes focus bracketing for the EOS R50 and automatic processing in Advanced A+.
  • Canon lists a maximum magnification of 0.5× for the RF lens and no in-body image stabilisation for the EOS R50. Check that the magnification is right for the details you want to capture.

Nikon

The Nikon Z50II with NIKKOR Z MC 50mm f/2.8 is a Z set-up with a DX camera body and a lens that also fits Z series DX cameras.

  • Nikon lists 1:1 magnification and a distance of around 5 cm between the front of the lens and the subject at the minimum focusing distance.
  • Nikon describes the angle of view on a DX body as equivalent to 75 mm. Check that you have enough distance on your table to get the framing you want.

Joybuy products

Related products coming soon.

Frequently asked questions

Is a kit lens automatically suitable for capturing the finest wood details?

No. Check the maximum magnification of the lens actually included in the kit. The camera body alone doesn’t determine how large a close-up will appear on the sensor.

Why isn’t the whole miniature in focus when I photograph it up close?

The closer you are to your subject, the shallower the depth of field. Take some test shots with different settings and lighting arrangements. If you need multiple depths in focus, check that both your camera body and lens support the focus stacking method you want to use.

What else should I check before taking my first shot?

Check what’s included in the box, whether the lens is compatible and whether you’ll need a memory card. OM SYSTEM states that an SD card and USB power adapter are not included with the OM-5 Mark II.

Who should I contact if a camera bought in the Netherlands is faulty?

Contact the seller to make a claim under the statutory guarantee. The Dutch government states that the seller must provide a solution if the product doesn’t meet what you could reasonably expect. A manufacturer’s guarantee may also apply.

Do I always have exactly 14 days to change my mind after buying online in the Netherlands?

For a standard online consumer purchase, the statutory withdrawal period usually ends 14 days after delivery. ACM ConsuWijzer also describes situations in which this right doesn’t apply, so check what applies to your type of purchase.