Who is this buying guide for?

Photographers with a cramped shooting table

You want to photograph a whole glass or a small collection without the camera, background and lighting getting in each other’s way. So consider the space available and the complete lens setup. For example, Canon Netherlands publishes the dimensions of the EOS R50 body.

Sellers showcasing glass details

You want to show engravings, maker’s marks or signs of wear. The maximum magnification and working distance of a close-up lens are useful factors to compare; Canon, Nikon and Sony publish these specifications for their individual macro lenses.

Photographers looking to reduce distracting reflections

You want to show the shape and transparency of glass clearly, while leaving room to control the lighting and background. Orbitvu Netherlands identifies lighting control as an important consideration when photographing reflective glass surfaces.

What should you look for when choosing?

First measure the space available for the camera, glass and lighting. Then decide whether you mainly want to capture the whole object or small details.

What to consider What to look for when buying Who is this important for?
Will the setup fit on and around the table? Measure the table and the distance behind the glass. Check that the largest object fits fully in the frame with your chosen body and lens. Bear in mind that the focusing distance is measured from the sensor, while the working distance is measured from the front of the lens. If my table has limited space, I want to know whether the camera, glass and lighting will all fit. Space is the top priority for around 33% of consumers considering this choice.
Reflections and lighting Take some test shots and see which windows, lamps and backgrounds are reflected in the glass. Leave room to move the lighting and background; switching to a different body won’t automatically eliminate reflections. I want to show the shape and transparency of glass without unwanted light sources appearing on the surface. Reflection control is the top priority for around 27% of consumers considering this choice.
Engravings and small details Compare the maximum reproduction ratio and working distance of the exact lens you’re considering. Also check whether you’ll still have room to light the glass with that lens. If I want to photograph small maker’s marks or damage, I’ll focus on the lens’s close-up capabilities. Detail shots are the top priority for around 20% of consumers considering this choice.
The complete camera-and-lens setup Check which lens is included with your chosen version and whether you’ll need to buy a close-up lens separately. Remember to allow space for support equipment and lighting, too. I want to know in advance which components I’ll need to photograph my glassware. The complete purchase is the top priority for around 20% of consumers considering this choice.

Common pitfalls

  • Comparing only the smallest camera bodies

    A body’s dimensions don’t tell you how much space the complete camera, lens, background and lighting will take up. You’ll also need to account for reflections when photographing glass.

    Consider the body, chosen lens, shooting distance and lighting together, and compare them with the space available on your table.

    A separate lens and a suitable lighting or background setup may take up extra space and mean additional purchases.

  • Mistaking a kit zoom for the macro lens mentioned

    The Canon EOS R50 kit with RF-S 18-45mm does not include the separate RF 35mm F1.8 MACRO IS STM. The 1:2 magnification Canon quotes applies to that macro lens, not automatically to the kit zoom.

    Check the exact lens names and the magnification specified for each lens. You may need to buy a compatible close-up lens separately.

  • Confusing focusing distance with the space needed for lighting

    The Sony E 30mm F3.5 Macro has a minimum focusing distance of 9,5 cm, while the distance from the front of the lens to the subject at maximum magnification is 2,4 cm. Nikon gives a working distance of 7,2 cm for the Z DX MC 35mm at its closest focusing distance.

    Compare the working distance from the front of the lens and check whether you can still position lighting there without creating unwanted reflections. These distances are specifications published by Sony and Nikon.

  • Assuming an additional warranty period is the same as your statutory rights

    In the Netherlands, the government says there is no fixed statutory warranty period of two years. If a product is faulty, the retailer remains your point of contact.

    Before paying for any additional warranty, check exactly what it covers and what conditions apply.

Camera brands to consider

Canon

The EOS R50 is an APS-C mirrorless camera with an RF mount. The RF 35mm F1.8 MACRO IS STM is a separate lens for close-up photography.

  • Canon specifies the EOS R50 body dimensions as approximately 116,3 × 85,5 × 68,8 mm.
  • Canon gives the separate RF 35mm macro lens a maximum magnification of 1:2.
  • The EOS R50 kit mentioned with the RF-S 18-45mm does not include this macro lens. The body does not have sensor-shift stabilisation.

Nikon

The Z50II is a Z system camera; the NIKKOR Z DX MC 35mm f/1.7 is a separately available lens for close-up photography in DX format.

  • Nikon specifies a maximum reproduction ratio of 0,67× and a working distance of 7,2 cm for the lens at its closest focusing distance.
  • The macro lens is not included with the separately sold Z50II body. The 0,67× specification is not the same as a 1:1 optical reproduction ratio.

Sony

The α6700 is an E-mount APS-C mirrorless camera. The E 30mm F3.5 Macro is a separate lens for close-up photography.

  • Sony specifies a 1:1 reproduction ratio for the macro lens.
  • Sony gives a working distance of 2,4 cm from the front of the lens at maximum magnification, and a minimum focusing distance of 9,5 cm. Limited space between the lens and the glass can make it harder to position lighting.
  • Check which lens is included with your chosen α6700 version; the macro lens mentioned is a separate lens.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need to buy a macro lens straight away for vintage glass?

Not if you mainly want to photograph the whole piece: first check whether it fits in the frame at the available distance with your chosen lens. If you want to capture small maker’s marks or damage, you can then compare the magnification and working distance of a compatible close-up lens. A kit zoom isn’t automatically a macro lens.

How can I set up a small table for consistent glass photos?

Keep the camera steady, check which windows and lamps are reflected in the glass, then move the lighting or background while keeping the framing the same. A tripod can help you keep the composition consistent; check that you have room for one on your table.

What should I check after purchase when it comes to maintenance and service?

Check which lens, charger and accessories are included with your chosen version, and keep your proof of purchase. If a product is faulty, the retailer is your point of contact for the statutory guarantee in the Netherlands; a manufacturer’s guarantee may also apply.

When shopping online in the Netherlands, do I always get 14 days to change my mind and exactly two years of statutory warranty?

No. According to the Dutch government, when you buy remotely from a business, you generally have 14 days to change your mind, but not every transaction is covered by these rules; buying online from a private individual is an exception. The Netherlands does not have a fixed statutory warranty period of exactly two years, according to the Dutch government. You’re entitled to a product that works as it should, and factors including its expected lifespan are taken into account.