First, choose a lens that lets you fit the whole tile into the frame from the space available between the camera and the table. A kit zoom is a good starting point for full-tile shots. For close-ups of glaze and relief, a macro lens may be more suitable, but the minimum focusing distance alone won’t tell you whether the whole tile will fit in the frame.
Who is this buying guide for?
Maker with a small photography table
You want to photograph a whole tile without moving the camera far from the table. Nikon Netherlands and Canon Netherlands offer examples of kits with a zoom lens; check whether the combination suits your tile and available space.
Maker showcasing glaze details
You want to capture texture or finish in close-up, while also making room for lighting. Nikon Netherlands describes a separate macro lens for detail shots.
Online shop owner taking product shots in batches
You want to capture tiles with consistent colour and composition. Canon Netherlands discusses white balance and using a stable camera setup for product photography.
What should you look for?
Kit zoom for the whole tile
Choose this option: if you mainly take full-tile shots and the tile fits in the frame from your working distance.
Bear in mind: framing and detail vary between lenses. A short focusing distance doesn’t guarantee you’ll be able to fit the whole tile in the frame.
Macro lens for details
Choose this option: if close-ups of details such as glaze, maker’s marks or relief matter alongside full-tile shots.
Bear in mind: a macro lens is an extra purchase, and working close to the subject can leave less room for lighting.
OM SYSTEM with a macro lens
Choose this option: if you want to explore a compact camera setup for detail shots.
Bear in mind: check lens compatibility and the clearance in front of the lens; the minimum focusing distance isn’t the same as the working distance.
Orbitvu Netherlands explains how glossy ceramics can pick up reflections, while Canon Netherlands covers how white balance affects colour. So, when choosing your setup, allow for lighting and a stable camera position too.
| What to consider |
What should you check? |
Who should consider this? |
| Fitting the whole tile in the frame |
Measure the tile and the available distance; check with the exact lens that the whole tile fits in the frame. The minimum focusing distance alone won’t answer this framing question. |
If I have limited depth on my table, I want to know first whether the whole tile will fit in the frame. Around 36% of consumers say framing at close range is their main buying concern. |
| Colour and gloss |
Check whether there’s room for a light source or diffuser, and whether you can adjust the white balance. Canon Netherlands also explains how RAW files give you scope to adjust white balance later. |
I want the glaze and colour to look true to life without distracting reflections. Around 29% of consumers prioritise colour reproduction and managing reflections. |
| Texture and finish |
Compare the maximum magnification of the exact lens and, if specified, check the distance between the front of the lens and the subject. Plan close-ups separately from full-tile shots. |
If I want to show small details such as relief, I’m mainly looking for a suitable close-up option. Around 21% of consumers give detail reproduction top priority. |
| Total system cost |
Check which lens comes with the kit and whether you’ll need another lens for macro photography. Also consider what you’ll need for a stable setup and lighting. |
I want to know what the complete camera setup will involve upfront, not just what a camera body on its own offers. Around 14% of consumers prioritise the total cost of the system. |
Common buying mistakes
-
Confusing the minimum focusing distance with the distance needed for a full-tile shot
A lens may focus close up, but the whole tile might not fit in the frame.
Measure the tile and available working space, then check the framing with the exact lens before choosing a kit.
-
Choosing a macro lens without checking the clearance in front of it
When shooting close up, there may be little room left to light the glaze without creating distracting reflections.
Where possible, check the distance from the front of the lens to the subject, and think about where you can position a light beside the camera.
-
Comparing camera bodies alone
The lens attached to the camera helps determine whether you can get the framing and level of detail you want.
Compare complete kits and check what’s included in the exact version. You may need to buy a suitable extra lens, a stable support and lighting separately.
Camera brands to compare
Nikon
A Z 30 kit with the Z DX 16–50mm is an option to consider for full-tile shots; there’s also a separate macro lens for close-up details.
- Nikon Netherlands lists a minimum focusing distance of 0.2 m for the kit zoom.
- For the Z DX MC 35mm f/1.7, Nikon Netherlands lists a maximum reproduction ratio of 0.67×. That figure alone won’t tell you whether a tile of unknown dimensions will fit completely in the frame.
Canon
The EOS R50 kit with the RF-S 18–45mm pairs a camera body with a zoom lens, making it a good starting point for full-tile shots.
- Canon Netherlands lists a 24.2-megapixel APS-C sensor and a vari-angle screen for the EOS R50.
- The kit lens is a zoom lens; don’t assume from the camera body’s specifications that the combination offers enough magnification for fine details.
Sony
The α6400 with an E-mount is an APS-C option with a separate 16–50mm kit zoom and a separately available FE 50mm F2.8 Macro lens.
- Sony Netherlands lists a maximum magnification ratio of 0.215× for the SELP1650 kit zoom and 1× for the SEL50M28 Macro.
- These figures apply to different lenses; the macro magnification doesn’t apply to the kit zoom.
OM SYSTEM
The OM-5 Mark II is a camera body to consider pairing with the M.Zuiko Digital ED 30mm F3.5 Macro lens.
- OM SYSTEM lists a maximum magnification of 1.25× and a minimum focusing distance of 9.5 cm for the macro lens.
- The minimum focusing distance isn’t the same as the clearance in front of the lens. Also check how much room you’ll need for lighting and whether the combination is compatible.
Products on Joybuy
Related products will be available soon.
Frequently asked questions
Do I need a macro lens to photograph a whole tile?
Not necessarily: first check whether a kit zoom lets you fit the whole tile in the frame from the space you have available. A macro lens is worth considering if you also want close-ups of small features; the minimum focusing distance alone won’t answer the framing question.
How can I keep a series of tile photos consistent on a small table?
Keep the camera, background and lighting in the same positions as much as possible. Canon Netherlands’ product photography tips recommend using a tripod to keep the composition consistent between shots; soft light can help reduce harsh shadows and strong reflections.
How can I stop the glaze colour looking different in my photos?
Pay attention to the colour of the light and set the white balance accordingly. Canon Netherlands explains how artificial light can cause a colour cast and how RAW files give you scope to adjust the white balance later; check the results under your own lighting.
What are my rights when buying online in the Netherlands?
For a consumer purchase made at a distance, the seller must provide information about matters including the cancellation period, which is usually 14 days. According to the Dutch government, if there’s a problem with a product you’ve bought, the seller must offer a solution under the legal guarantee. Check which rules apply to your purchase, especially if you’re buying as a business.