Who is this buying guide for?

Photographing makers at work

You want to capture both the craftsperson and what they’re doing. Think about your framing and how you’ll focus while the maker is moving.

Photographing in a small workspace

You can’t move far back. Check whether the camera and your chosen lens can capture both the maker and the workbench from the space available.

Photographing details of the work

As well as the maker, you want to photograph small details of materials or tools. Your close-up options will depend in part on the lens you choose.

What should you look for when buying?

First, work out what framing you need from the camera position available. Then consider focusing, lighting and whether you have room for a fixed setup.

What to consider What should you check? Who is this important for?
Keeping the maker in focus while they work Check the available subject detection and focus settings. Also consider whether you can track the maker from your shooting position with your chosen lens. If I want to keep the maker and what they’re doing in shot, I’ll focus on tracking them as they move; around 31% of consumers say this is their top priority.
Getting the maker and workbench in shot Measure the available distance and check the field of view of the specific lens on your chosen camera. Test the framing from where you’ll actually be shooting. If I can’t move further back and want to photograph both the maker and the workbench, framing is crucial; around 25% of consumers put limited space first.
Creating a repeatable setup Check whether there’s room for a tripod and lighting. Make sure the camera offers the settings and RAW shooting you need. If I want to photograph pieces of work in the same place so they’re easy to compare, I’ll look for consistent composition and lighting; around 25% of consumers say consistency is their top priority.
Photographing small details of the work Check the magnification, minimum focusing distance, working distance and camera compatibility for the exact lens you’re considering. If close-ups of small patterns or tools are my main priority, I’ll focus on the lens; around 19% of consumers put details of the work first.

Buying pitfalls

  • Comparing camera bodies alone

    The field of view and close-up capabilities depend in part on the lens. A standard zoom won’t necessarily be suitable for the smallest details of materials or tools.

    Check exactly what’s included in the kit you’re considering, and look at the lens’s focusing distance and magnification.

  • Expecting stabilisation to solve every blurring problem

    The stabilisation rating Fujifilm quotes for the X-S20 applies under the stated test conditions. Stabilisation compensates for camera shake, but it won’t freeze the maker’s moving hands.

    When planning your setup, assess stabilisation, lighting and the maker’s movements separately.

  • Leaving your fixed setup until after you’ve bought the camera

    A tripod can help you keep the framing and background consistent across repeated shots, but it takes up space.

    Before you buy, test whether the maker, workbench, camera and lighting will all fit in the space you have in mind.

Brands to compare

Canon

The EOS R50 is an APS-C camera with an RF mount. If you want to photograph small details of your work, you can consider a suitable macro lens separately.

  • Canon specifies 24.2 effective megapixels and human tracking for the EOS R50.
  • Canon does not specify in-body image stabilisation for this model. Also check which lens is included in the kit you choose.

Nikon

The Z50II is worth considering if you want to use an electronic viewfinder when photographing a maker at work.

  • Nikon describes the Z50II as having an electronic viewfinder and autofocus features.
  • The field of view and minimum focusing distance depend in part on the Z lens you choose.

Fujifilm

According to Fujifilm, the X-S20 combines an APS-C sensor with in-body image stabilisation. Separate XF macro lenses are available for close-ups.

  • Fujifilm specifies RAW shooting and 26.1 effective megapixels for the X-S20.
  • The quoted stabilisation rating applies under the stated lens and test conditions, and isn’t a guarantee for every studio situation.

Sony

The ZV-E10 II with an E-mount is an option if you also want to film the making process regularly, as well as take photos.

  • Sony specifies an APS-C sensor and approximately 26.0 effective megapixels for photos taken with the ZV-E10 II, and describes the model’s video features.
  • Video features alone aren’t a reason to prioritise this model for a job that only requires photos.

OM SYSTEM

The OM-5 Mark II is a compact mirrorless camera to consider if a small handheld setup is important.

  • OM SYSTEM lists a weight of 418 g including the battery and SD card, and details the stabilisation features on this model.
  • OM SYSTEM positions the camera mainly for outdoor use, but that doesn’t automatically make it a better choice for a studio.

Mirrorless cameras at Joybuy

These Joybuy mirrorless cameras are for anyone who wants to photograph a maker at work and try different framings in a small studio. For each kit, check that the lens suits the framing and close-ups you want.

Sony ZV-E10 with 16–50mm zoom lens, black

Sony ZV-E10 + 16–50mm Zoom Black

This kit could suit you if you want to photograph the maker and try different framings. Check that the zoom range works for the distances in your studio.

The product description lists an APS-C sensor, Sony E-mount and a 16–50mm zoom lens.

The autofocus features listed include Face Priority and Real-time Eye AF.

Joybuy
Sony Alpha A6100 with 16–50mm f/3.5–5.6 OSS II lens

Sony Alpha A6100 + 16–50mm f/3.5–5.6 OSS II

This kit could be a good option if you want to photograph the maker in a confined space. Assess the framing with the included lens from your actual camera position.

The product description lists a 24.2 MP APS-C sensor, an electronic viewfinder and a body weight of 396 g.

The autofocus feature listed includes Real-time Eye AF.

Joybuy
Sony ZV-E10 mirrorless camera body, body only

Sony ZV-E10 Mirrorless Vlogging Camera - Body Only

This version could suit you if you already have a compatible Sony E-mount lens that works with your studio setup.

The product description lists an APS-C sensor and Real-time Eye AF.

This is the camera body only; you’ll need a compatible Sony E-mount lens to use it.

Joybuy

Frequently asked questions

Do I need a macro lens straight away to photograph the maker and their work?

Not if you’re mainly taking wider shots. First, work out what framing suits the distance available. For very small details, check the close-up capabilities of the specific lens. A kit zoom and a macro lens aren’t necessarily interchangeable.

What can help me use the same photo setup every time?

A tripod and a fixed background can help you keep the framing consistent across product shots. Canon Netherlands explains this in its practical product photography advice. Beforehand, check that the tripod, camera and lighting will fit in your studio without getting in the maker’s way.

Will I have to pay extra for a warranty if my camera breaks?

For a consumer purchase in the Netherlands, the Dutch Government says the seller must provide a solution if the product is faulty. There is no fixed statutory warranty period for all products. Before deciding whether an extended warranty offers anything extra, compare its terms with your statutory rights.

Can I photograph identifiable craftspeople and publish the images for business purposes?

If you photograph and publish images of identifiable people on behalf of a business or organisation for professional or commercial purposes, the Dutch Data Protection Authority says the GDPR applies and you need a valid legal basis under the GDPR. Consent is one possible legal basis, but it isn’t automatically the only one. Before taking and publishing the photos, decide which legal basis applies to your use. An exception applies to personal or household use only, subject to the stated conditions.