Who is this buying guide for?

Seller of tiny components

You want to make labels, contacts and solder details clearly visible. So, check the magnification and working distance of your chosen lens; Canon UK, Nikon UK and Sony UK each provide details of separate macro lenses for this purpose.

Manager of a large product catalogue

You want to photograph products with similar framing, backgrounds and colours. Canon UK describes a tripod as a way to achieve consistent composition; white balance also needs attention when lighting conditions vary.

Beginner with a limited kit budget

You want to check whether the included lens captures the required details clearly before choosing a separate macro lens. Check the exact lens included in the kit and take a test shot.

What should you look for when buying?

Start by considering how you want the smallest detail to appear in the frame. Then check whether the lens, camera and lighting setup are right for taking product photos regularly.

What to consider What should you check? Who is this important for?
Small details and depth of field Magnification and working distance of the exact lens; take a test shot with the framing you want. I want to show labels, contacts or solder points clearly, even when components sit at different heights. Around 42% of consumers prioritise small details and sufficient depth of field.
Consistent catalogue photos Repeatable positioning of the camera and subject, and settings for the background, lighting and white balance. I want photos of different components to have the same framing and colour. Around 33% of consumers prioritise consistent catalogue shots.
What’s included in the complete kit Which lens is actually included and whether its mount is compatible with the camera body; compare this with a test shot. I want to know in advance whether the lens in the kit will capture the level of detail I need before choosing a separate macro lens. Around 25% of consumers prioritise the cost and contents of the complete kit.

Common buying mistakes

  • Assuming a macro lens’s magnification applies to the camera kit

    The 1.4× magnification specified by Canon UK applies to the separate RF 100mm F2.8L Macro IS USM lens, not to the EOS R50 body.

    Check the full name of every included lens and, if needed, take a test shot of the smallest component.

  • Looking only at the megapixel count

    High resolution alone doesn’t tell you whether a small label will appear large enough in the frame. Your choice of lens, magnification and desired framing also matter.

    Compare complete camera-body-and-lens combinations, and assess a test shot at the image size you need.

  • Choosing a macro lens without checking there’s room for lighting

    For the NIKKOR Z MC 50mm f/2.8, Nikon UK gives a distance of around 5 cm between the front of the lens and the subject when shooting at very close range. This matters if you need to position lights close to a small circuit board.

    Test the setup at the magnification you need and check that the camera and lens won’t obstruct the lighting.

  • Assuming you have a consumer’s right to cancel when buying for business

    According to Ondernemersplein, the statutory 14-day cooling-off period for the distance sales to consumers described does not automatically apply when a business buys for commercial purposes.

    Before ordering, check whose name you’re buying under and which contractual terms and warranty apply.

Camera brands for reference

Canon

The EOS R50 is an APS-C camera body with an RF mount. The RF 100mm F2.8L Macro IS USM is a separate lens.

  • Canon UK specifies 24.2 megapixels for the EOS R50 and a maximum magnification of 1.4× for the macro lens mentioned.
  • The magnification specification applies to the lens, not the body or every kit. Canon does not list in-body image stabilisation for the EOS R50.

Nikon

The Z50II body is part of the Z system; the NIKKOR Z MC 50mm f/2.8 is a separate macro lens.

  • Nikon UK specifies 1:1 magnification for the MC 50mm f/2.8.
  • When shooting at very close range, Nikon gives a distance of around 5 cm between the front of the lens and the subject. Bear this in mind when positioning lights.

OM SYSTEM

The OM-5 Mark II is a Micro Four Thirds camera body; M.Zuiko macro lenses are available separately.

  • OM SYSTEM lists 20 MP and a body weight of 418 g, including battery and SD card, for the OM-5 Mark II.
  • Check the features and compatibility of the specific macro lens. Weight alone is not a decisive factor for a fixed tabletop setup.

Sony

The α6700 is an APS-C camera body with an E-mount. Sony says the FE 90mm F2.8 Macro G OSS can be used with APS-C cameras with an E-mount.

  • Sony specifies approximately 26.0 megapixels for the α6700 and up to 1:1 magnification for the separate FE 90mm lens.
  • Check whether the macro lens is actually included in the kit on offer; the 1:1 specification applies to the lens, not every α6700 kit.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Is a kit zoom lens good enough for photographing electronic components?

It depends on the framing and clarity you need. Take a test shot of the smallest relevant label with the exact kit lens, and don’t assume that magnification specifications for a separate macro lens apply to the kit.

How can you keep product photos taken on different days consistent?

Keep the positions of the subject and tripod, the framing, background and lighting as consistent as possible. Canon UK recommends using a tripod for consistent composition and notes that white balance needs attention in challenging lighting conditions.

Should you use focus stacking?

Only if relevant areas at different heights aren’t sharp enough in a single photo. A series of images taken with the focus shifted can show greater depth of field when combined; Canon UK describes this technique for macro photography. Check how your exact camera-and-lens combination captures and processes the series.

Can you rely on the statutory 14-day cooling-off period when buying a camera online for your webshop business?

Not necessarily: according to Ondernemersplein, the statutory 14-day cooling-off period applies to the distance sales to consumers described, but does not automatically apply to a business purchase. Before buying, establish whether you’re entering into the contract as a consumer or a business, and check the applicable terms and warranty.

Can you use edited product photos of components on your Dutch webshop?

Editing isn’t automatically a problem, but the photo and other product listing information must not mislead consumers or conceal important product details. After editing, check that labels, specifications and accessories shown match what’s on offer. The Netherlands Authority for Consumers and Markets describes misleading information as information that is incorrect, could be misunderstood or leaves out important details.