Seller of painted figures
Wants to capture brushwork and small parts clearly, so compares the magnification offered by a suitable lens rather than looking at the camera body alone.
Start by choosing a compatible lens that captures small paint details at a sufficient size: the camera body alone does not determine magnification. If you photograph deep figures, compare focus bracketing with focus stacking and check which steps the camera handles itself. For a consistent series of online shop photos, it also helps to use fixed lighting and colour settings, a tripod, and to check which lens and accessories are included in your chosen kit.
Wants to capture brushwork and small parts clearly, so compares the magnification offered by a suitable lens rather than looking at the camera body alone.
Creates a series of product photos and wants the paintwork and presentation to look as consistent as possible from one shot to the next.
Wants to capture the whole figure convincingly and is exploring depth of field, focus stacking and a fixed tripod setup.
Start with the lens and the magnification you need. Then compare the focusing workflow and setup that will help you take repeatable product photos.
Choose this if: you mainly want to show paint details and prioritise your choice of lens. Nikon recommends the Z DX MC 35mm f/1.7 for Z DX cameras; the Fujifilm X-S20 can be paired with the XF30mmF2.8 macro lens.
Trade-off: the macro lens is a separate item to check; make sure the working distance suits your tabletop setup.
Choose this if: you want focus bracketing and need to weigh up whether the RF-S 18-45mm kit zoom offers enough magnification or you need a separate macro lens.
Trade-off: Canon lists a maximum of 0.16× at 45 mm with autofocus for the kit zoom, and 0.5× for the RF 85mm F2 MACRO IS STM. These are lens specifications, not a guarantee that an entire figure will be in focus.
Choose this if: you regularly photograph deep figures and in-camera stacking matters to you. OM SYSTEM lists the M.Zuiko Digital ED 60mm F2.8 Macro as a compatible lens.
Trade-off: OM SYSTEM says the stacked photo is cropped by around 7% at the edges, so leave some space around your subject.
Choose this if: you may want to combine product photography with video and are looking for an interchangeable E-mount lens.
Trade-off: Sony lists the E PZ 16-50 mm zoom lens in the kit and describes the E 30 mm F3.5 Macro separately, so don’t assume the macro lens is included.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Magnifying small details | Check the lens mount, maximum magnification, working distance and whether the macro lens is actually included in the kit. | If I want to show small brushstrokes and parts clearly, I focus on the lens. Around 31% of consumers say magnification for details is their top priority. |
| Keeping colours true to life | Check whether you can adjust the white balance and assess test shots of your own paint colours under consistent lighting. | When I want colours to look consistent across product photos, I pay attention to keeping the lighting and camera settings fixed. Around 25% of consumers prioritise true-to-life colours. |
| Keeping a deep figure in focus | Understand the difference between focus bracketing, combining images in software and in-camera stacking; check lens compatibility and leave space around your subject. | If I want a figure to be sharp from front to back, I look into how images taken at different focus positions are combined. Around 25% of consumers say depth of field is their top priority. |
| Creating a consistent series of photos | Check that the camera and controls suit your setup, and allow space for a tripod, lighting and background. | When photographing lots of individual figures, I want to be able to repeat the framing and presentation without having to set everything up from scratch each time. Around 19% of consumers prioritise a repeatable workflow. |
Maximum magnification depends on the lens. Canon lists different figures for the RF-S 18-45mm kit zoom and the separate RF 85mm F2 MACRO IS STM. The Sony ZV-E10 II kit and the separately listed macro lens are different lenses too.
Before you decide, check the full lens name and what’s included in the kit you’ve chosen.
You may need to buy a separate macro lens for high magnification.
Focus bracketing captures images at different focus positions; you may still need to combine them. OM SYSTEM also says that stacking on the OM-5 Mark II with a compatible lens crops around 7% from the edges of the image.
Check for each camera body and lens whether the images are combined in-camera or as part of your post-processing.
Combining images afterwards takes time and may require suitable software.
Nikon lists a true reproduction ratio of 0.67× for the Z DX MC 35mm f/1.7 and describes it as the equivalent of 1:1 in FX format. These are different ways of describing it.
Compare maximum reproduction ratios on a like-for-like basis, and check whether the detail you want or the whole figure will fit in your frame.
ACM ConsuWijzer distinguishes between contracts based on their primary use; consumer protection does not apply in the same way when a contract is used mainly or exclusively for business purposes.
Before paying, check whether your purchase is mainly for private or business use, and read the terms that apply to it.
The EOS R50 is an APS-C body with focus bracketing. If small details matter, compare the kit zoom with a separate macro lens.
The Z DX MC 35mm f/1.7 is a macro lens that Nikon specifically recommends for Z DX bodies, including the Z50II.
The OM-5 Mark II is worth considering if in-camera stacking is important to you. OM SYSTEM lists the M.Zuiko Digital ED 60mm F2.8 Macro as a compatible lens.
The X-S20 can be paired with the XF30mmF2.8 R LM WR Macro for an APS-C setup with a separate macro lens.
The ZV-E10 II has interchangeable E-mount lenses and may suit anyone looking to combine product photos with video.
These interchangeable-lens cameras are worth considering for product photography of painted figures. For small details, check whether the zoom lens supplied offers enough magnification.
No image available
A camera with an interchangeable lens and 16-50mm zoom; check whether this lens offers enough magnification for the finest paint details.
No image available
This version is listed with a 16-50mm lens; check whether its magnification suits the details you want to capture for your online shop.
It depends on the size of your figure and the magnification of the specific lens. Canon lists a maximum of 0.16× at 45 mm with autofocus for the RF-S 18-45mm kit zoom, compared with 0.5× for the separate RF 85mm F2 MACRO IS STM. Check how the subject fits in the frame at your intended working distance.
Keep your lighting setup and white balance as consistent as possible, and use a tripod to keep the framing and background fixed. Canon describes this approach for product photography, but it doesn’t guarantee that a particular camera will automatically reproduce the true paint colour exactly.
According to ACM ConsuWijzer, consumer protection does not apply in the same way if you use the contract mainly or exclusively for business purposes. The situation may be different if your use is mainly private; consider how you will actually use the camera and the seller’s terms and conditions.
You can’t simply use other people’s photos without permission. The Chamber of Commerce points out that photos are protected by copyright, and using them without permission may infringe those rights. Take your own product photos or get permission, and make sure you present the figures you sell and their features clearly and accurately.