Start by choosing a lens and lighting setup that suit the size of your glaze test. A macro lens is particularly useful if you want to fill the frame with small details. For close-ups, consider both the maximum magnification and the space between the lens, sample and lighting. If you want to compare colours or successive tests, keep the framing and lighting as consistent as possible. The Smithsonian Institution Archives describes diffused light as a way to reduce glare on reflective surfaces.
Who is this setup for?
Glaze maker comparing colours
You want to assess successive tests without changes in lighting or automatic white balance unnecessarily affecting the comparison. The Smithsonian Institution Archives discusses using diffused light when photographing reflective surfaces, while Nikon USA describes using a white-card reading to set the white balance.
Maker capturing glaze details
You want to show small textures at a larger scale, so you need to weigh up magnification, focusing distance and the space available for lighting. The manufacturer’s macro lens specifications can help you assess how these factors work with your chosen camera.
Maker creating a consistent record of tests
You want to photograph several tests from the same angle, so repeatable framing and lighting are especially useful. Canon Europe recommends a tripod to help keep framing consistent in product photography.
What should you look for?
Camera with a standard lens
A good fit if: the whole glaze test fills enough of the frame from the available shooting distance.
The trade-off: you may not need a separate macro lens, but very small texture details won’t fill the frame by themselves.
Mirrorless camera with a macro lens
A good fit if: you want to capture small glaze details close-up and the lens is compatible with your camera mount.
The trade-off: the working distance and space for lighting can limit your setup on a small table.
Fixed camera and lighting setup
A good fit if: you want to document a series of tests under similar conditions.
The trade-off: a tripod and adjusted lighting take up space, and won’t guarantee identical colour reproduction on every screen.
| What to consider |
What to look for |
Who is this important for? |
| Comparing colours |
Check for RAW shooting, adjustable white balance and options for keeping exposure consistent. |
I want to assess colour differences between glaze tests under similar lighting; around 33% of consumers prioritise colour comparison. |
| Capturing small details |
Compare the maximum magnification and focusing distance of the exact lens, and check that the mount is compatible. |
I want to fill the frame with small textures; around 27% of consumers focus mainly on magnifying detail. |
| Managing reflections |
Check whether there’s room to move the camera or lighting, or to soften the light. |
I want shiny areas to remain visible without glare obscuring details; around 20% of consumers prioritise managing reflections. |
| Repeating shots |
Check there’s space for a tripod and that you can review the framing from that position. |
I want to capture several tests from the same angle; around 20% of consumers value a repeatable record above all else. |
Buying pitfalls
-
Assuming a separate lens’s macro specification applies to a camera with a kit lens
The maximum magnification of the Canon RF 35mm F1.8 MACRO IS STM applies to that specific lens. It doesn’t automatically apply to an EOS R50 with a different lens.
Check exactly what’s included in the kit and the magnification of the supplied lens.
For macro photography, you may need a separate lens that’s compatible with your camera.
-
Mistaking the minimum focusing distance for the free space in front of the lens
Manufacturers may measure the distance from the focal plane. This means that on a small table, there may be less space between the front of the lens and the sample than you expect.
Check how the distance is measured and whether your setup leaves enough room for the lighting.
-
Assuming a different camera body will solve unwanted glare
Glare on glossy glaze also depends on the direction and spread of the light, as well as the shooting angle.
First, try adjusting the lighting setup and camera position. Diffused light is one option for reflective surfaces.
Camera brands to consider
Canon
An RF system to consider if you’re looking at the EOS R50 and want to choose a lens to suit your desired framing.
- Canon Europe specifies an RF mount for the EOS R50.
- Canon specifies a maximum magnification of 1:2 for the separate RF 35mm F1.8 MACRO IS STM; this doesn’t apply to every R50 kit lens.
Nikon
A Z system to consider if you want to pair a compatible camera body with a separate macro lens.
- Nikon specifies a maximum magnification of 1:1 for the NIKKOR Z MC 50mm f/2.8.
- Nikon lists a minimum focusing distance of 0.16 m and around 5 cm between the front of the lens and the subject at that distance; allow room for lighting.
Fujifilm
An X system to consider if RAW shooting and a separate macro lens are part of your decision.
- Fujifilm specifies RAW shooting for the X-S20 and a maximum magnification of 1:1 for the XF30mmF2.8 R LM WR Macro.
- The minimum focusing distance of 0.1 m for this lens is measured from the focal plane, not the front of the lens.
Sony
An E-mount system to consider if you’re looking at an APS-C camera with a separate, compact macro lens.
- Sony specifies a maximum magnification of 1:1 and a minimum focusing distance of 9.5 cm for the E 30 mm F3.5 Macro.
- Check how much space the chosen combination leaves between the lens and the glaze for lighting.
Products on Joybuy
Related products coming soon.
Frequently asked questions
Do I need to buy a macro lens for every glaze test?
No. If the whole test fills enough of the frame with your chosen lens at your working distance, you can start with that. If you want to fill the frame with small surface details, compare the maximum magnification, focusing distance and lens mount of a macro lens.
How can I make photos of successive tests comparable?
Keep the framing and lighting setup as consistent as possible, and set the white balance deliberately. If colour assessment is important, include a colour reference in the shot too; a tripod can help keep the framing consistent. This won’t guarantee identical results on different screens.
What can I do if highlights obscure details?
First, try changing the direction of the camera or light, or softening the light. The Smithsonian Institution Archives describes using diffused light to reduce glare on reflective objects; with ceramics, check that the desired gloss remains visible.
What are my rights in the Netherlands when buying a camera online?
For many online purchases by consumers, there is a 14-day cooling-off period, although exceptions may apply. According to the Government of the Netherlands, you’re also entitled to goods of satisfactory quality, but there is no fixed statutory guarantee period in the Netherlands. If something is faulty, contact the seller. Before buying, check who the seller is and which terms and conditions apply to your order.