Who is this guide for?

Glaze tester comparing colours

You photograph test pieces at different times and want to assess variations in colour. Nikon Netherlands recommends paying attention to consistent exposure and white balance. RAW gives you more scope for editing, but takes up more storage space.

Maker capturing fine details

You want to show crystals, speckles or crazing in a small area of a test piece. Look at the lens’s magnification and working distance, not just the number of megapixels in the camera body. Canon Netherlands, Nikon Netherlands and Sony Netherlands describe a range of lens and magnification options.

Maker starting with a single kit

You want to start by photographing entire test pieces without choosing a separate macro lens straight away. Compare the lens supplied with the kit and its close-up capabilities. The Consumers’ Association points out that mirrorless cameras can be paired with different types of lenses.

What should you consider when choosing?

First decide whether you mainly want to capture the whole test piece, fine surface textures or repeatable colour differences. The points below are relevant if you’re choosing a mirrorless camera for photographing glaze tests in window light.

What to consider What should you check? Who is this important for?
Comparing colours Check that the camera supports white balance adjustments and RAW capture. Photograph in as consistent a light as possible, and readjust the white balance if the light changes. Nikon Netherlands describes RAW as more flexible for editing, but notes that it creates larger files. When I compare glaze tests photographed at different times, I don’t want to mistake changes in the light for colour differences. Around 36% of consumers put colour comparison first.
Capturing fine details Compare the magnification and working distance of the exact lens, and check that its mount is compatible with the camera body. According to Canon Netherlands, the Canon RF-S 18-45mm achieves a maximum magnification of 0.16× at 45 mm with autofocus; Sony Netherlands specifies 1:1 magnification for the SEL30M35. If I want to show crystals or crazing in a small area of a test piece, the lens needs to make those details large enough in the frame. Around 29% of consumers put fine glaze details first.
Managing light and reflections Take a test shot to check for reflections and, where possible, avoid mixing different light sources. If you’re considering focus bracketing or focus stacking, check that the exact camera and lens support the feature. With glossy glaze, I want to be able to assess and adjust my window-light setup without mistaking differences in colour for the effect of a creative profile. Around 21% of consumers put light and reflections first.
What’s included in the kit Check whether the offer includes a lens and whether it suits your subject. Compare the complete combination of camera body and compatible lens, not just the body. If I want to start with one usable kit, I want to know in advance exactly which lens I’ll get and what I’ll be able to photograph with it. Around 14% of consumers prioritise what’s included in their first kit.

Common buying mistakes

  • Expecting a kit zoom to work like a 1:1 macro lens

    A kit zoom and a macro lens don’t automatically offer the same magnification. According to Canon Netherlands, the Canon RF-S 18-45mm achieves a maximum magnification of 0.16× at 45 mm with autofocus; Sony Netherlands specifies the Sony SEL30M35 as a 1:1 macro lens.

    First decide whether you want to photograph an entire test piece or a small surface detail. Then compare the magnification and mount of the exact lens.

  • Confusing minimum focusing distance with working distance

    Minimum focusing distance is measured from the image sensor; working distance is the space between the front of the lens and the subject. That space can affect how you light a test piece by a window.

    Check the working distance of the exact lens as well as its magnification.

  • Assuming a creative colour profile guarantees comparable colours

    Nikon Netherlands describes Picture Controls as creative presets and recommends adjusting the white balance to suit the available light. A profile like this can’t replace consistent shooting conditions.

    Keep the lighting and white balance as consistent as possible when comparing test pieces, and assess creative profiles separately.

Camera brands to consider

Canon

The EOS R50 is a compact RF-mount camera body that can be paired with an RF or RF-S lens, including a kit zoom for photographing entire test pieces.

  • Canon Netherlands lists a 24.2 MP APS-C sensor and support for RF and RF-S lenses. Canon also notes that the EOS R50 supports focus bracketing.
  • According to Canon Netherlands, the RF-S 18-45mm achieves a maximum magnification of 0.16× at 45 mm with autofocus. So check separately whether it can capture small details large enough.

Nikon

The Z50II with its Z mount can be paired with the separate NIKKOR Z DX MC 35mm f/1.7 for close-ups.

  • Nikon Netherlands lists a maximum reproduction ratio of 0.67× for this DX macro lens.
  • Nikon also describes this ratio as the equivalent of 1:1 in FX format; that isn’t the same as an optical 1:1 ratio. Picture Controls are creative presets, not proof of more accurate glaze colours.

Sony

The α6700 with its E mount can be paired with the separate SEL30M35 for capturing fine details.

  • Sony Netherlands specifies an APS-C sensor with approximately 26.0 effective megapixels for the α6700, and 1:1 magnification for the SEL30M35.
  • Sony Netherlands describes the SEL30M35’s working distance as very short. Bear this in mind when planning the space for your window-light setup.

OM SYSTEM

A camera system worth considering if you regularly take still macro photos with multiple focus planes.

  • OM SYSTEM describes focus bracketing and focus stacking for the OM-1 Mark II.
  • Check support for the exact camera and lens. Extra features aren’t necessarily needed for a single photo of an entire glaze test.

Joybuy products

Related products coming soon.

Frequently asked questions

Do you need a macro lens for every glaze test?

No, it depends on what you want to capture. For an entire test piece, you can first check whether the magnification of a suitable kit lens is enough; a macro lens may be more suitable for fine textures. Canon Netherlands lists a maximum magnification of 0.16× at 45 mm with autofocus for the RF-S 18-45mm; Sony Netherlands specifies 1:1 magnification for the SEL30M35.

How can you use window light to take more comparable glaze photos?

Keep the lighting as consistent as possible throughout a series, avoid mixing daylight and artificial light where you can, and recheck the white balance if the light changes. Nikon Netherlands describes RAW as a format that gives you more scope for editing, but also creates larger files; it won’t automatically correct reflections.

What do focus bracketing and focus stacking mean for a glaze detail?

Focus bracketing takes shots at different focus points; focus stacking combines shots to show more focus planes in a still subject. Check which steps are supported for each camera model and lens, and what editing is required.

What if a camera kit bought online isn’t right for you or develops a fault too soon?

For online consumer purchases in the Netherlands, you generally have a statutory 14-day cooling-off period from delivery; ACM ConsuWijzer advises checking which exceptions apply. Your statutory guarantee is separate from the manufacturer’s warranty: if a product used normally develops a fault sooner than you could reasonably expect, contact the seller to arrange a solution.