Potter with an online shop
You want to photograph several pieces consistently, so the glaze’s colour and sheen come across well. A fixed lighting setup and colour workflow can help, as described by Magic Box and Sony Netherlands.
Start with a setup that fits the whole piece and lets you control reflections with soft, diffused light. Then compare the lens’s magnification and working distance with the space available on your table. A kit zoom may be enough for wider shots, while small crackle or texture details may call for a dedicated macro lens. RAW and adjustable white balance give you scope to correct colour, but neither guarantees accurate colours on its own.
You want to photograph several pieces consistently, so the glaze’s colour and sheen come across well. A fixed lighting setup and colour workflow can help, as described by Magic Box and Sony Netherlands.
You want to capture small differences, such as crackle or crystals, up close. So compare not only a lens’s magnification, but also the space left to light the glaze.
You need to fit the piece, camera and lighting into a small area. Measure or test your framing and shooting distance using the largest piece you plan to photograph. Soft light can help control reflections on ceramics, as described by Magic Box and Orbitvu.
Start with the photo you want: a full shot of a piece needs suitable framing, while small glaze details need enough magnification and room to position your lighting.
| What to consider | What to look for | Who it matters most to |
|---|---|---|
| Comparing glaze colours | Check for RAW support and adjustable white balance; keep the lighting and colour reference consistent in comparison shots. | If I want to compare colours between shots, I prefer to keep the lighting and processing consistent. Around 33% of consumers rank colour comparability as their top priority. |
| Showing small details | Compare the maximum magnification and working distance of the exact lens. | For frame-filling shots of small crackle or texture details, I want to know how close the lens needs to be to the piece. Around 27% of consumers prioritise detail magnification. |
| Controlling reflections | Allow room for diffused lighting and check test shots for both distracting reflections and visible sheen. | I want to be able to control distracting reflections without losing the glaze’s sheen. Around 20% of consumers put reflection control first. |
| Framing the whole piece | Measure the distance from your camera position and check whether the kit includes a suitable lens. | When table space is limited, I want to fit the whole piece into the frame from the available camera position. Around 20% of consumers make framing in a limited space their main priority. |
The Canon kit zoom reviewed has a lower maximum magnification than a 1:1 macro lens. This means a small glaze detail may not appear as large in the frame.
Decide based on the smallest details you want to show filling the frame, and check the magnification of the lens actually supplied with the camera.
A separate lens may be needed later for larger close-ups of details.
Focusing distance and the clear space between the front of the lens and the subject are different measurements. At a short working distance, there may be little room for a diffuser when photographing glossy ceramics.
Compare how the stated distances are measured and check how much space you actually have on your table.
You may need a different lens or an adapted lighting setup to position the light effectively.
RAW gives you room to adjust settings such as white balance afterwards, but reflections and the colour of the light also affect the shot itself.
Take test shots under consistent, diffused light and use the same white balance workflow for comparison photos.
A consistent lighting and colour workflow takes time and may require extra equipment for lighting or colour checking.
The EOS R50 with RF-S 18-45mm is an example of a camera with a standard zoom for wider shots. The separate RF 35mm F1.8 MACRO IS STM is an option for larger close-ups of details.
The α6400 body with an E-mount lets you choose your own lens. The separate E 30mm F3.5 Macro is a 1:1 option for close-ups.
The Z50II with a Z mount can be paired with the separate NIKKOR Z MC 50mm f/2.8 for both wider shots and close-ups of details.
The X-S20 with an X mount is a RAW-capable camera body; the separate XF30mmF2.8 R LM WR Macro is a short 1:1 macro option.
The OM-5 Mark II is worth considering if you regularly photograph relief up close and want to use focus stacking with a compatible M.Zuiko lens.
Not if you mainly photograph whole pieces and a kit zoom frames them well from your camera position. For small details, compare the maximum magnification: the Canon kit zoom reviewed does not reach the 1:1 magnification offered by the separate Sony, Nikon and Fujifilm macro lenses according to their manufacturers.
Start with soft, diffused light and keep the background and camera position as consistent as possible. Turn the piece or move the light if a reflection hides a detail. Take a test shot of your largest piece first to check that there is enough room for the camera and diffuser.
Check whether the kit you choose includes a lens, memory card and any lighting you need, or whether you will need to buy them separately. If a consumer product bought in the Netherlands is faulty, contact the seller to resolve the issue; according to the Dutch government, there is no fixed statutory two-year guarantee period.
When you buy online as a consumer from a business, you usually have a 14-day cooling-off period; the Dutch government advises checking for any applicable exceptions. For publishing someone else’s existing photos, the Dutch government says you generally need permission from the creator.