Who is this choice relevant to?

Exhibition photographer

You want to photograph several glass pieces from similar angles and in similar lighting. The Cultural Heritage Agency of the Netherlands emphasises the importance of deciding in advance which views and details your photographs need to show.

Detail documentarian

You want to show small markings, textures or damage clearly, so you’re paying attention to the lens and the space available for lighting. The Cultural Heritage Agency of the Netherlands identifies details such as material texture and markings as possible subjects.

Photographer with an existing camera system

You want to see whether a compatible lens and a modified lighting setup will do the job before buying a different camera body. Canon, Nikon, Fujifilm and Panasonic each use their own mount and lens combinations.

What should you look for in a camera and lens?

Start with the shot you want: a consistent image of the whole piece calls for a different lens choice from a close-up of a small marking. With glass, lighting and the space around the object deserve at least as much attention as the camera body.

What to consider What to look for when buying Who should prioritise this?
Reflections and outlines Assess test shots using a safe surface, a shielded light source, and light or dark cards placed beside the glass. Proshoots describes placing black foam boards on either side as one way to make the outlines visible. When I photograph clear or coloured glass, I want to control the outlines without distracting reflections. Around 33% of consumers give controlling reflections their top priority.
Small details Compare the maximum magnification, lens mount and space in front of the lens for the framing you want. The word ‘macro’ alone doesn’t tell you whether a detail will appear large enough in the image. If a marking or area of damage needs to be clearly visible on its own, I look at both magnification and the space available for lighting. Around 27% of consumers prioritise magnifying details.
A consistent series of photographs Check whether a tripod, fixed background and repeatable camera settings will suit the overview and detail shots you need. If I want to present different pieces in the same way, I look for a setup I can repeat. Around 20% of consumers give a consistent exhibition series their top priority.
The complete setup Check which lenses are compatible with the camera body and what you already own. Compare the full setup you’ll need, including the lens, tripod and lighting equipment. If I want to avoid unnecessary purchases, I first check whether my current camera body will do the job with a suitable lens and different lighting. Around 20% of consumers prioritise the overall cost of their purchase.

Pitfalls when buying equipment for glassware photography

  • Comparing camera bodies alone

    The mount determines which lenses fit a camera body, while reflective glass also calls for a carefully planned lighting setup. A camera body on its own won’t provide the complete setup.

    Compare the camera body with a compatible lens, and first check what equipment you already own.

    A suitable lens, tripod and lighting equipment may need to be bought separately.

  • Assuming ‘macro’ means 1:1 magnification

    Canon specifies a maximum magnification of 0.5× for the RF 85mm F2 Macro. Nikon specifies 1:1 for the NIKKOR Z MC 50mm f/2.8, as does Fujifilm for the XF30mmF2.8 R LM WR Macro. These are specifications for individual lenses, not a comparison of their performance.

    Compare the maximum magnification with the size of the detail you want to capture.

  • Confusing focusing distance with working distance

    Fujifilm’s stated minimum focusing distance of 0.1 m is measured from the image plane. Nikon specifies around 5 cm of space in front of its 50mm macro lens at the closest focusing distance.

    Check that your lens and lighting won’t get in each other’s way with your chosen setup, and that the fragile glass can remain safely in place.

An overview of brands and systems

Nikon

The Z50II camera body has a Z mount; the NIKKOR Z MC 50mm f/2.8 is a separate macro lens.

  • Nikon specifies 20.9 effective megapixels for the Z50II and 1:1 magnification for the macro lens mentioned.
  • Nikon specifies around 5 cm of space in front of the lens at the closest focusing distance. Check whether there’s still room to position lighting there.

Fujifilm

The X-S20 camera body with an X mount can be paired with the separate XF30mmF2.8 R LM WR Macro.

  • Fujifilm specifies RAW support for the X-S20 and 1:1 magnification for the lens mentioned.
  • The stated minimum focusing distance of 0.1 m is measured from the image plane, not the front of the lens. So it doesn’t tell you how much working space is available for lighting.

Canon

The EOS R50 is compatible with RF and RF-S lenses. Choose a suitable lens for the framing you need.

  • Canon specifies an APS-C sensor with 24.2 effective megapixels for the EOS R50.
  • Canon specifies a maximum magnification of 0.5× for the separate RF 85mm F2 Macro. Check whether that’s enough for the smallest markings you want to photograph.

Panasonic

The LUMIX G9 II camera body uses a Micro Four Thirds mount; you’ll need to choose a compatible lens separately.

  • Panasonic specifies RAW support for the G9 II and 1:1 magnification for the H-ES045 macro lens.
  • Panasonic Netherlands marks this particular lens as unavailable. This doesn’t tell you definitively whether other compatible lenses are available.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need a new mirrorless camera to photograph my collection?

Not necessarily. Start by thinking about the photographs you need, then see whether you can take them with your current camera and a safe, repeatable setup. The Cultural Heritage Agency of the Netherlands emphasises that the views and details you need depend on what you want to document.

How can I reduce distracting reflections on glass?

Start with a stable setup and adjust the position and shielding of the light, checking the outlines in test shots as you go. Proshoots describes placing black foam boards on either side of the glass as one possible setup technique. The result will depend on the situation and where you position the light.

What should I look for in a macro lens for small markings?

Check the maximum magnification, compatibility with your camera body and the space in front of the lens for lighting. Canon specifies a maximum of 0.5× for the RF 85mm F2 Macro; Nikon and Fujifilm specify 1:1 for the individual lenses discussed here.

Can I use existing photographs taken by other people in my exhibition?

For copyrighted photographs, the Dutch Government states that you need permission from the creator to use them. Check each image to see whether you need permission or whether another licence applies.

What should I consider if visitors are recognisable in exhibition photographs?

Photographs in which visitors can be recognised require a separate assessment under privacy rules. According to the Dutch Data Protection Authority, a legal basis is needed to take and publish such images. This is separate from photographing the glass objects alone.