Who is this guide for?

Creator photographing framed prints

You photograph prints behind glass in a home studio and want to tackle distracting reflections before choosing a different camera body. Canon Netherlands describes how a circular polarising filter can reduce reflections from glass.

Colour-critical reproduction creator

You want to photograph different prints under comparable conditions. National Museums Scotland describes using a grey card or colour chart as a colour reference, and RAW processing as part of a reproduction workflow.

Creator producing large final files

You have a specific need for more detail or room to crop images, so you compare the stated resolution of particular camera models.

What should you consider when choosing?

First assess your lighting setup and whether the lens is suitable; then work out how much detail your final file actually needs. The considerations below will help you compare the camera body, lens and workflow as one complete setup.

Consideration What should you check? Who is this important for?
Reflections and lighting Check how the lights and a reflector illuminate the print; see whether a compatible circular polarising filter will fit your lens or adapter. If I photograph prints behind glass, I want to tackle distracting reflections before paying for extra pixels. Around 31% of consumers prioritise reflections and lighting.
Colour consistency Check that the camera supports RAW shooting, and allow for a grey card or colour chart and repeatable lighting. When I compare multiple prints, I want to use a consistent colour reference and comparable lighting. Around 25% of consumers prioritise consistent colour.
Detail in the final file First decide on the file size and crop you need; then compare the stated resolution of the specific models. If I need large files or cropped images, I want to match the resolution to my intended final result. Around 25% of consumers prioritise having that extra detail.
Complete setup Assess the camera body, suitable lens and required lighting equipment together; also check that your largest frame will fit within the available shooting distance. When I assess the whole setup, I want to know whether the body, lens and studio space will work together. Around 19% of consumers prioritise this practical combination.

Common pitfalls

  • Assuming more megapixels will solve reflections on glass

    The stated pixel count describes the sensor, while reflections are a separate issue caused by the shooting setup. A higher resolution won’t remove them.

    First test your lighting and check the reflections in a test shot. Then decide how much resolution your intended final file needs.

  • Comparing camera bodies on their own

    A camera body can’t fill the frame with a framed print on its own; the lens mount, lens and available shooting distance all matter. For the Canon EOS R7, Canon Netherlands describes support for RF and RF-S lenses, adapter use for EF and EF-S lenses, and incompatibility with EF-M lenses.

    Check the mount and lens for the exact body, and measure whether you can fit the entire frame into the shot from the available distance.

  • Confusing vivid colour reproduction with a colour reference

    A creative colour setting isn’t, by itself, a consistent reference for comparing different prints. National Museums Scotland cites a grey card or colour chart and RAW processing as part of a reproduction workflow.

    Capture a colour reference under repeatable lighting, then compare the processed image with the original print.

Camera brands to compare

Canon

The Canon EOS R7 is an APS-C model with a stated resolution of 32,5 MP. Canon Netherlands lists support for RF and RF-S lenses, and adapter use for EF and EF-S lenses.

  • The stated resolution and lens mounts give you specific points to compare.
  • According to the specifications, EF-M lenses aren’t compatible; the pixel count alone says nothing about colour reproduction or reflections.

Fujifilm

Fujifilm specifies 40,2 MP for the X-T5 and 102 MP for the GFX100S II. These are different camera systems, so choose a lens that fits the exact body.

  • The models have different stated resolutions to weigh against the requirements of your final file.
  • The manufacturer’s information isn’t an independent comparison of colour accuracy when shooting through glass.

Nikon

Nikon lists a resolution of 45,7 MP for the full-frame Z 7II.

  • The stated resolution gives you a specific point of comparison if your final file needs more detail.
  • Assess the lens and shooting distance separately; the specification doesn’t demonstrate an advantage in controlling reflections.

Sony

For the α7R V, model ILCE-7RM5, Sony lists approximately 61,0 effective megapixels and RAW shooting.

  • The model specifications give you specific points to compare for a planned final file and a RAW workflow.
  • The stated features aren’t an independent test of colour reproduction or reflection control.

Joybuy products

These Joybuy picks are APS-C mirrorless cameras: choose from kits with a zoom lens included or a body-only option to pair with a lens of your choice.

Sony ZV-E10 with 16-50mm zoom lens, black

Sony ZV-E10 + 16-50mm Zoom Black

This kit pairs the Sony ZV-E10 with a 16–50 mm zoom lens, so you can assess the camera and lens together.

View at Joybuy
Sony Alpha A6100 with 16-50mm f/3.5-5.6 OSS II lens

Sony Alpha A6100 + 16-50mm f/3.5-5.6 OSS II

According to the product variant, this combination includes a camera with a 16–50 mm lens, so you can weigh up your lens choice alongside the body.

View at Joybuy
Sony ZV-E10 mirrorless camera, body only

Sony ZV-E10 Body Only

This is a body-only option with no lens included. Choose it if you already have a suitable lens or want to select one separately.

Check the lens mount and the shooting distance you’ll need before finalising your complete setup.

View at Joybuy

Frequently asked questions

Will a polarising filter always prevent reflections in frame glass?

No. A suitable circular polarising filter can reduce reflections from glass, but it isn’t guaranteed to remove every reflection. Canon describes this use for the filter; check that it’s compatible with your lens or adapter, and assess a test shot under your lighting conditions.

How can you make the colours of multiple prints easier to compare?

Use a repeatable lighting setup and photograph a grey card or colour chart as a reference. National Museums Scotland also mentions RAW processing as part of its approach to photographing collections.

What can you do if a camera bought online isn’t suitable?

For a consumer purchase in the Netherlands, the seller is responsible for the legal guarantee if the product doesn’t do what you could reasonably expect, according to ACM ConsuWijzer. In many cases, a qualifying distance purchase also comes with a 14-day cooling-off period; the Dutch government describes this as a right subject to certain conditions.

Can you publish photos of someone else’s framed prints?

Not necessarily. The Dutch government states that copyright protects, among other things, photographs and works of art, and you may need permission to use someone else’s copyright-protected photographs. A copy for your own use at home must not be distributed or made public; check the rights to the specific print before publishing a reproduction.