Pin maker documenting details
You want to capture fine lines, edges and finishes clearly. Consider the magnification offered by your chosen lens and how much working space it leaves.
Start by deciding how much magnification you need and how much room you’ll have in front of the lens for lighting. Only then choose a camera body and lens mount. For shiny enamel pins, diffused light and a repeatable setup are just as important as the camera specifications. A zoom lens may be enough for overview shots, while close-up details may call for a dedicated macro lens.
You want to capture fine lines, edges and finishes clearly. Consider the magnification offered by your chosen lens and how much working space it leaves.
You photograph several pins for product listings and benefit from controlled lighting, a simple background and true-to-life colours. Nikon and Adobe describe controlled lighting and a clean background as elements of product photography.
You need to set up and pack away your camera, pin and lighting in a limited space. The distance from the lens to the subject and the size of the complete setup both matter.
First decide whether you mainly want to photograph the whole pin or focus on small details. Then check that your chosen lens leaves enough room for lighting, and that the body, lens and other essentials will all fit on your workbench.
| Consideration | What should you check? | Who is this important for? |
|---|---|---|
| Magnifying fine details | Check the lens’s maximum magnification and how much room it leaves in front of the lens. Nikon Netherlands specifies 1:1 for the Z MC 50mm f/2.8; Sony Netherlands gives a working distance of around 13 cm for the FE 90mm F2.8 Macro G OSS. | If I want small engravings or enamel sections to fill the frame, I look at both magnification and space for lighting. Around 33% of consumers put magnifying details first. |
| Reflections and colour | Take test shots using diffused light and check for bright reflections and colour casts. Nikon describes a light tent as one way to soften the light when photographing jewellery. | If you want to photograph a series of pins with similar lighting, focus on a setup that’s easy to control. Around 27% of consumers prioritise consistent lighting and colour. |
| Workbench space | Measure the available space and try out the complete setup, including the camera, lens, pin and lighting. Consider the working distance at your desired magnification, not just the minimum focusing distance. | If I need to set up and pack away my kit on a shared workbench, space for the whole setup matters. Around 20% of consumers give available workspace their top priority. |
| Body, lens and kit contents | Check the lens mount and what’s actually included in the kit. Compare the complete setup rather than just the camera body. | If you want to buy a camera with the lens you need, check in advance that the lens is compatible with your chosen body and included in the kit. Around 20% of consumers prioritise buying a complete setup. |
The number of megapixels doesn’t determine how large a small pin appears in the frame. The lens matters too.
Compare the maximum magnification of the lens actually supplied with the camera against the framing you want. Also check that the lens mount is compatible.
Minimum focusing distance doesn’t tell you directly how much room there’ll be between the lens and the pin for a lamp or diffuser. Sony distinguishes between a working distance of around 13 cm and a minimum focusing distance of 28 cm for the FE 90mm F2.8 Macro G OSS.
Check the working distance at the magnification you want to use, and test the complete lens setup with your lighting.
Lighting a small, shiny subject takes care, whatever camera body you choose.
Start with a repeatable setup using diffused light and take some test shots of a shiny pin.
Focus stacking combines several shots. OM SYSTEM says that, after processing, the image edges are cropped by around 7% on the OM-5 Mark II.
Check that your lens is compatible, leave space around the pin in your frame and keep the setup still throughout the sequence.
A sequence of shots takes extra time.
The EOS R50 is an RF-mount body; a macro lens such as the RF 100mm F2.8L Macro IS USM is a separate lens option.
The Z50II can be paired with the NIKKOR Z MC 50mm f/2.8 lens, which should be considered separately, for pin details.
E-mount bodies such as the ZV-E10 can be paired with the separate FE 90mm F2.8 Macro G OSS lens.
The OM-5 Mark II can be used with a compatible M.Zuiko macro lens for focus stacking with stationary pins.
No. First check whether the magnification of the lens in your kit suits the framing you want. A separate macro lens is most useful when small details don’t appear large enough in the frame. At the same time, check how much room the lens leaves for lighting.
Start with diffused light and check a test shot for bright spots. Nikon describes using a light tent when photographing shiny jewellery as a way to soften the light and achieve more consistent results. This doesn’t guarantee that every pin will be captured without reflections.
Check who the seller is, which body and lens are actually included, and what returns policy applies to your purchase. According to the Dutch government, many distance-selling agreements come with a 14-day cooling-off period, but there are exceptions. A specific retailer’s promise isn’t automatically the same as a legal right.
It depends on who takes the photo and how it will be used. The Dutch Data Protection Authority considers identifiable people in images to be personal data. An employer needs a legal basis to take and publish photos of employees; in most cases, this is consent. Keep colleagues out of the product shot, or check which rules apply to your situation before publishing.