Who is this buying guide for?

Embroidery enthusiast documenting stitches

You want to capture small stitches and thread texture clearly. Magnification, precise focusing and sufficient depth of field matter more than action-shooting features. Sony Netherlands and Canon Netherlands explain how close-up photography affects depth of field.

Maker with a small worktable

You need to frame the fabric while leaving room for lighting. The working distance from the front of the lens is different from the minimum focusing distance measured from the sensor, as Sony Netherlands explains.

Maker taking colour-accurate pattern photos

You also photograph larger sections of your embroidery and want thread colours to look consistent. Look for repeatable lighting and white balance; Canon Netherlands explains how RAW images give you room to adjust white balance afterwards.

What should you look for when choosing?

APS-C camera with a short macro lens

A good fit if: individual stitches are your main subject and you want a compact set-up.

Trade-off: at high magnification, depth of field is shallow. The working distance may also limit the space available for lighting.

Micro Four Thirds with focus stacking

A good fit if: you want stitches at different heights to appear sharp in the final image and are happy to combine several shots.

Trade-off: the fabric and camera must remain still, and you’ll need to check that your chosen camera and lens support focus stacking together.

Mirrorless camera with a standard zoom lens

A good fit if: you mainly photograph the whole embroidery hoop or a larger pattern.

Trade-off: a standard zoom isn’t automatically suitable for filling the frame with individual stitches. Check the magnification or consider a separate macro lens.

What to consider What to look for when buying Who is this important for?
Magnification and sharpness Check the maximum magnification of the exact lens. Sony Netherlands lists 1:1 for the E 30mm F3.5 Macro, Canon Netherlands lists 1:2 for the RF 35mm F1.8 Macro, and Nikon Netherlands lists 0,67× on DX for the Z DX MC 35mm f/1.7. Also check whether your specific camera and lens combination supports focus bracketing or stacking. I want to capture small stitches and thread texture clearly, even when the stitches are at different heights. Around 33% of consumers in this group say detail is their main buying concern.
Room for the camera and lighting Compare the working distance at the magnification you want to use. Sony Netherlands lists a working distance of around 2 cm at 1:1 for the E 30mm Macro; Nikon Netherlands gives 7,2 cm from the front of the lens at the Z DX MC 35mm f/1.7’s closest focusing distance. My small table needs to fit the camera, fabric and lamp side by side. For around 27% of consumers, making the most of limited working space is their main buying concern.
Colour and texture Look for consistent lighting conditions and check whether RAW images are available if you want to adjust white balance later. Canon Netherlands explains the options RAW gives you for post-processing. I want the thread colours and pattern in my embroidery photos to remain recognisable. Around 20% of consumers put colour reproduction first.
Complete set and budget Check whether you’re buying a camera body, standard zoom or macro lens, and whether the lens mount fits the camera. Compare the cost of the complete set-up, including any support and lighting you may need. I want to know in advance what I’ll need for a usable camera and lens combination, not just the body. For around 20% of consumers, the total purchase cost comes first.

Buying pitfalls

  • Assuming a standard zoom is a complete macro set-up

    According to Canon Netherlands, the Canon EOS R50 kit includes the RF-S 18-45mm zoom lens. This isn’t the same as the RF 35mm Macro, which is sold separately, and what’s included in a kit affects how large a stitch appears on the sensor.

    Check the exact kit contents, lens mount and maximum magnification of the included lens.

    For macro photography, you may need a separate compatible macro lens and a stable camera support.

  • Confusing the minimum focusing distance with the clear space in front of the lens

    The minimum focusing distance is measured from the sensor. Sony Netherlands lists a minimum focusing distance of 9,5 cm for the E 30mm Macro, with a working distance of around 2 cm at 1:1. These measurements answer different questions about where you can place your lamp and hands.

    Compare the working distance at your desired magnification and check whether your lighting will still fit.

  • Treating an equivalent as the same optical magnification

    Nikon Netherlands specifies a maximum reproduction ratio of 0,67× on DX for the Z DX MC 35mm f/1.7. A stated 1:1 equivalent in FX format is not the same as the optical reproduction ratio.

    Compare the actual reproduction ratio, sensor format and desired framing separately.

Camera brands and relevant models

Canon

For overview shots, there’s the EOS R50 with its RF-S kit zoom; for smaller details, the RF 35mm F1.8 Macro is a separate lens.

  • Canon lists focus bracketing for the EOS R50.
  • Canon specifies a maximum magnification of 1:2 for the RF 35mm Macro. The EOS R50 doesn’t have sensor-shift image stabilisation, so check what stabilisation your chosen lens offers.

Nikon

The Z50II can be paired with the separate NIKKOR Z DX MC 35mm f/1.7 for macro shots of details on your worktable.

  • Nikon specifies a reproduction ratio of 0,67× on DX for this lens.
  • The stated working distance of 7,2 cm from the front of the lens applies at the closest focusing distance. Check that you have enough room for your lighting set-up.

Sony

The APS-C α6400 paired with the separate E 30mm F3.5 Macro makes an E-mount combination for close-ups.

  • Sony specifies a reproduction ratio of 1:1 for the E 30mm F3.5 Macro.
  • Sony distinguishes between the minimum focusing distance of 9,5 cm from the sensor and the working distance of around 2 cm in front of the lens at 1:1. This short working distance can make lighting more difficult.

OM SYSTEM

The OM-5 Mark II can be paired with the separate M.Zuiko Digital ED 30mm F3.5 Macro for a Micro Four Thirds set-up.

  • OM SYSTEM lists Focus Stacking in-camera, with lens support on compatible cameras.
  • Check support and settings for your specific camera and lens combination; the camera and lens aren’t automatically included together as a set.

Panasonic LUMIX

The LUMIX G97 has a vari-angle screen for checking compositions above a table. Panasonic also lists the separate Micro Four Thirds H-HS030 macro lens.

  • A vari-angle screen can help you review compositions on a table.
  • Panasonic Netherlands lists the H-HS030 as unavailable on the relevant product page. Check the exact lens and set before buying.

Related products

Related products coming soon.

Frequently asked questions

Is the closest focusing distance enough to tell whether a lens will fit above my table?

No. The minimum focusing distance is measured from the sensor; the working distance from the front of the lens is what matters for the space between the lens, fabric and lamp. For example, Sony Netherlands lists a minimum focusing distance of 9,5 cm for the E 30mm Macro and a working distance of around 2 cm at 1:1.

How can I get stitches at different heights in focus?

Keep the fabric and camera still, and check whether your chosen camera and lens combination supports focus bracketing or focus stacking. If a single shot doesn’t provide enough depth of field, stacking can combine several images. A still subject and stable set-up are essential.

How can I keep thread colours as consistent as possible between photos?

Keep the lighting as consistent as possible and pay attention to white balance. According to Canon Netherlands, RAW gives you room to adjust white balance afterwards, but consistent shooting conditions are still important when comparing colours with your embroidery.

What can I do if a camera I bought online doesn’t work properly?

If a product is faulty despite being used normally, the seller is responsible for providing a suitable solution, such as a repair, replacement or refund, according to ACM ConsuWijzer. Your statutory rights depend on the circumstances; ACM ConsuWijzer does not describe the guarantee as simply a fixed two-year period.

Can I always return a camera ordered online in the Netherlands within 14 days?

Not in every case. The Government of the Netherlands states that many online purchases from businesses come with a 14-day cooling-off period, but there are exceptions. Check who the seller is and which terms and conditions apply to your purchase.