Who is this guide for?

Photographers capturing component details

You want to capture small labels, connections or solder points individually. So, consider both the lens’s magnification and how much room it leaves for lighting. Nikon lists 1:1 magnification for the Z MC 50mm f/2.8, while Canon specifies a maximum of 1.4× for the RF 100mm F2.8L Macro.

Creators photographing a regular product range

You photograph several circuit boards against the same white background and want to keep the framing and lighting consistent. Canon recommends using a tripod for consistent composition in product photography; you should also check the results in test shots.

Documenting raised components

You want both the circuit board and its raised components to appear sharp, so you’re considering taking several shots at different focus points. OM SYSTEM supports focus stacking on the OM-5 Mark II with certain lenses, including the M.Zuiko 60mm F2.8 Macro.

What should you consider when choosing?

What to consider What to look for Who is this important for?
Small components Compare the maximum magnification of the specific lens with the crop you want, and check how much room there is in front of the lens for lighting. Nikon lists 1:1 magnification for the Z MC 50mm f/2.8 and approximately 5 cm of clearance at the closest focusing distance. If I want small labels or solder points to appear large in the frame, I focus on magnification and working distance. Around 33% of consumers make component details their top priority.
White background Take test shots and check that both the background and the circuit board details remain clearly visible. Canon explains that a predominantly bright scene can affect automatic metering. I want a white background with recognisable components and consistent results from one shot to the next. Around 27% of consumers prioritise the background and lighting.
Components at different heights Check whether the camera supports focus stacking or a series of shots at different focus points, whether the lens is compatible and whether the circuit board can remain still. OM SYSTEM states that focus stacking on the OM-5 Mark II crops approximately 7% from the edges of the image after processing. If I want both the board and taller components to appear sharp, I check whether I need multiple focus planes. Around 20% of consumers put depth of field first.
Complete camera kit Check what’s included in the bundle, the lens mount and the magnification of the lens you choose. A camera body sold on its own is not the same as a complete macro kit. I want to make sure the body, lens and intended shot are a good match before choosing a kit. Around 20% of consumers prioritise having a complete kit.

Common buying mistakes

  • Assuming a body-only camera is a complete macro kit

    The Canon EOS R50 body is supplied without a lens. Magnification depends on the lens you choose, and the lens must be compatible with the mount.

    Check exactly what’s included in the bundle, as well as the lens mount and magnification, before choosing a kit.

  • Confusing the minimum focusing distance with the working distance in front of the lens

    Fujifilm measures the specified minimum focusing distance of 0.1 m for the XF30mmF2.8 R LM WR Macro from the sensor plane. Nikon lists approximately 5 cm of clearance in front of the lens at the closest focusing distance for the Z MC 50mm f/2.8. These measurements describe different things.

    At the magnification you want, check that there’s enough room for the lens, circuit board and lighting.

  • Assuming a white background will be exposed correctly automatically

    Canon explains that automatic metering can make a very bright scene appear darker than intended.

    Check test shots for both the background and the components, and adjust the exposure if needed.

  • Choosing focus stacking without checking the lens and crop

    OM SYSTEM lists specific compatible lenses for focus stacking on the OM-5 Mark II and notes that approximately 7% of the image edges are cropped after processing.

    Check that your lens is compatible and leave some space around the circuit board in the original frame.

    Combining several shots can add to the processing time.

Camera brands to consider

Canon

The EOS R50 body with an RF mount can be paired with a separate RF macro lens.

  • Canon specifies 24.2 effective megapixels for the EOS R50.
  • Canon lists a maximum magnification of 1.4× for the RF 100mm F2.8L Macro.
  • According to Canon, the EOS R50 does not have in-body image stabilisation; the macro lens mentioned is not included with a body-only camera.

Nikon

The Z50II can be used with a separate Z-mount macro lens, such as the Z MC 50mm f/2.8.

  • Nikon lists 1:1 magnification for the Z MC 50mm f/2.8.
  • At the closest focusing distance, Nikon specifies approximately 5 cm of clearance in front of the lens. Consider whether this leaves enough room for lighting.

OM SYSTEM

The OM-5 Mark II supports focus stacking with certain compatible M.Zuiko lenses.

  • OM SYSTEM lists the M.Zuiko 60mm F2.8 Macro among the compatible lenses.
  • According to OM SYSTEM, approximately 7% of the image edges are cropped after processing. Check the lens separately when putting your kit together.

Fujifilm

The X-S20 body with an X mount can be paired with the separate XF30mmF2.8 R LM WR Macro.

  • Fujifilm specifies 26.1 effective megapixels and RAW shooting for the X-S20; the manufacturer lists a maximum magnification of 1× for the XF30mmF2.8 Macro.
  • The specified minimum focusing distance of 0.1 m is measured from the sensor plane, not as clearance in front of the lens. So, check how much practical room you’ll have for lighting.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Do I need a 1:1 macro lens straight away to photograph the whole circuit board?

Not necessarily. First, check whether the whole board and the text you want to show fit into the frame at your chosen shooting distance. Magnification becomes more important when you want to capture individual small components. A standard kit lens and a separate macro lens have different maximum magnifications.

How can I photograph different circuit boards from the same angle?

Keep the camera and background in fixed positions, and check the framing for each board. Canon recommends using a tripod for consistent composition in product photography. A fixed setup doesn’t remove the need to check the exposure and reflections.

Do I always need focus stacking for raised components?

No, not if a single shot renders the components you want to show sufficiently sharp. If you need multiple focus planes, combining shots can help. For built-in focus stacking, check whether your lens is supported and how much of the frame remains after processing.

What warranty and cooling-off period apply to an online purchase in the Netherlands?

If you buy as a consumer, your statutory warranty is separate from any manufacturer’s warranty. According to ACM ConsuWijzer, what you can expect from a product depends on the circumstances and whether it has been used normally. Online consumer purchases generally come with a 14-day cooling-off period after delivery, although exceptions apply. If you’re buying mainly for business use, consumer rules don’t automatically apply; check the terms that apply to your purchase.

What should I look for in terms of EU product safety?

CE marking is only required for products covered by harmonised EU rules that make it compulsory, including certain electrical and electronic equipment. The European Union describes CE marking as a declaration by the manufacturer that the applicable requirements have been met. It is not an independent quality test or proof that a camera is suitable for circuit board photography.