Start with the macro lens: magnification and working distance determine whether small components are clearly visible, while the camera body alone does not guarantee a complete macro setup. For reflective circuit boards, adjustable, diffuse lighting is important. Focus bracketing can help with components at different heights, but check whether each model combines the images in-camera or on a computer.
Who is this setup for?
Detail inspector
You want to check small labels, components and solder joints. Canon Europe, OM SYSTEM Netherlands and Nikon Netherlands document macro lenses with different magnifications, so start with the lens and working distance rather than the body alone.
Workbench photographer
You work with changing light at a shared table and want to minimise reflections and a cumbersome setup. Basler AG describes diffuse lighting for highly reflective surfaces; remember to allow space for the light source, too.
Repeatable record-keeper
You regularly photograph several circuit boards or components at different heights and need to consider focus bracketing, support and processing time. Canon Europe, Sony Support and OM SYSTEM document focus bracketing or focus stacking features on specific camera models.
What should you look for?
Canon EOS R50 with an RF macro lens
A good fit if: you want to use in-camera focus bracketing and choose the lens separately to suit the level of detail and working distance.
Bear in mind: according to Canon Europe, magnification of up to 1.4× applies to the separate RF 100mm F2.8L Macro IS USM lens, not every kit.
Sony α6700 with an E-mount macro lens
A good fit if: you want an E-mount setup or prefer to process focus-bracketed images yourself afterwards.
Bear in mind: Sony Support says that external software is needed to combine images from the α6700. The FE 90mm F2.8 Macro G OSS is a separate lens with magnification of up to 1:1.
OM SYSTEM OM-5 Mark II with an M.Zuiko macro lens
A good fit if: you move your kit between shared workspaces and want to use the camera’s focus stacking feature.
Bear in mind: according to OM SYSTEM, the body weighs 418 g including the battery and card; the lens, support and lighting add to this. Check that stacking works with your exact lens and settings.
Nikon Z50II with a NIKKOR Z macro lens
A good fit if: you want to build a Nikon Z setup, starting with the macro lens.
Bear in mind: Nikon specifies 1:1 magnification for the NIKKOR Z MC 50mm f/2.8, with around 5 cm between the front of the lens and the subject at the minimum focusing distance. Check whether there is room for lighting and tools.
When photographing circuit boards on a shared workbench, four practical considerations come into play: the size of the details, lighting, sharpness across different heights and the space needed for the complete setup.
| Consideration |
What to look for when buying |
Who should prioritise this? |
| Small details |
Check the maximum magnification of the exact lens, its mount and working distance. |
If I want to check small labels or solder joints, I start with the lens and the distance to the circuit board. Around 33% of consumers doing this circuit board task give clearly visible details top priority. |
| Reflections and task lighting |
Consider adjustable, diffuse lighting and the space needed for a light source or diffuser. |
When glare threatens to hide details, I want to be able to adjust the lighting setup first. Around 27% of consumers doing this circuit board task prioritise controlling reflections. |
| Components at different heights |
Check whether the model offers focus bracketing and how the images are combined. |
If I want to capture components at different heights consistently, how a focus-bracketed series is processed is key. Around 20% of consumers doing this circuit board task give consistent depth of field top priority. |
| Shared workbench |
Consider the space needed and combined weight of the body, lens, support and lighting. |
If I have to set up and pack away the kit in a shared workspace, I want to know how much room the whole setup takes. For around 20% of consumers doing this circuit board task, a manageable complete workbench setup is the main consideration. |
Common buying mistakes
-
Assuming a camera body or kit zoom is a complete macro setup
Magnification depends on the specific lens. Close-up photography also calls for a stable setup.
Check the exact lens version, mount, magnification and working distance before choosing a kit.
A separate macro lens and possibly camera support are part of the complete setup.
-
Trying to fix reflections by changing the camera body alone
Without suitable lighting, reflective surfaces can hide important details. Basler AG describes diffuse lighting for highly reflective surfaces.
Try your intended lighting setup with a similar circuit board and check that it fits on the workbench.
An adjustable light source or diffuser may need extra setup space.
-
Confusing focus bracketing with automatic image merging
Taking a series of shots is not the same as combining them. Sony Support says that external software is needed for the α6700.
Check where images are combined for the exact camera model, and whether the setup can remain stable throughout the series.
Your chosen workflow may require post-processing time and software.
Camera brands to consider
Canon
An EOS R50 setup with a separately selected RF macro lens is one option if you want to use focus bracketing.
- Canon Europe documents focus bracketing for the EOS R50.
- According to Canon Europe, magnification of up to 1.4× is available with the separate RF 100mm F2.8L Macro IS USM, not every camera kit. Also consider how much space you need above the circuit board.
Sony
An α6700 with an E-mount macro lens suits a workflow where focus-bracketed images are processed afterwards.
- Sony documents focus bracketing for the α6700 and magnification of up to 1:1 for the separate FE 90mm F2.8 Macro G OSS lens.
- According to Sony Support, external software is needed to combine the images.
OM SYSTEM
The OM-5 Mark II offers a compact body with a focus stacking feature; you’ll need to choose the macro lens separately.
- OM SYSTEM lists the body at 418 g with battery and card, and specifies 1:1 magnification for the separate M.Zuiko Digital ED 60mm F2.8 Macro lens.
- Check that focus stacking works with your chosen lens and settings. The stated body weight does not include the complete workbench setup.
Nikon
The Z50II can be paired with a separate NIKKOR Z macro lens, such as the Z MC 50mm f/2.8.
- Nikon specifies 1:1 magnification for the NIKKOR Z MC 50mm f/2.8.
- Nikon states that at the minimum focusing distance there is around 5 cm between the front of the lens and the subject. Check that there is enough room for lighting and access to the circuit board.
Joybuy products for circuit board photography
Related products coming soon.
Frequently asked questions
Should you choose a camera body or a macro lens first?
Start with the size of the details, the magnification you need and the available working distance. Then choose a body with the right lens mount and the focus features you want. In these examples, 1:1 and 1.4× magnification apply to specific standalone lenses.
How can you set up your kit to avoid unwanted reflections?
Position the camera securely and try changing the direction or diffusion of the light with a similar circuit board. Basler AG describes diffuse lighting for highly reflective surfaces; the best position depends on which details you want to bring out.
Does every camera with focus bracketing automatically create a single composite image?
No. Focus bracketing does not automatically tell you where the images will be combined. Sony Support says that external software is needed for the α6700; check the camera features and lens compatibility separately for other models.
Who can help if a camera you bought as a consumer in the Netherlands turns out to be faulty?
According to the Netherlands Authority for Consumers and Markets, the seller is responsible for the statutory guarantee if a product does not conform to the contract. This is separate from any manufacturer’s guarantee; the statutory guarantee is not simply a fixed two years for every product.
Can you photograph identifiable colleagues in a shared workshop and publish the images?
The Dutch Data Protection Authority says that employers need a lawful basis to photograph employees and publish the images. Keep people out of shot when photographing circuit boards. If someone is identifiable in an image, discuss publication and workplace arrangements separately.