Who is this choice relevant to?

Component detail photographer

Wants to capture tiny markings and solder joints clearly. KEYENCE and Leica Microsystems highlight lighting as an important consideration when inspecting circuit boards; for photography, magnification and lens mount are also key.

Circuit board documentarian

Wants consistent images of a whole circuit board, including components at different heights. Canon documents focus bracketing and in-camera compositing for the EOS R10; OM SYSTEM lists Focus Stacking for the OM-5 Mark II.

Workbench-light photographer

Wants to manage colour casts, reflections and possible banding under artificial light. Canon describes its white balance settings, while Sony notes that the options for tackling flicker can vary between camera models.

What should you look for when buying?

Start with the smallest details you need to capture clearly. Then assess the focusing workflow, the space available for lighting, and the complete camera-and-lens combination.

What to consider What should you check? Who is this important for?
Magnifying tiny details Check the maximum magnification of the specific lens and take a test shot of the smallest marking you need to capture. If I need to inspect tiny solder joints or markings, I want to know whether my lens will show them large enough. Around 36% of consumers give detail magnification top priority when buying.
Components at different heights Check focus bracketing and compositing with the lens you plan to use; Canon documents these features for the EOS R10, while OM SYSTEM lists focus stacking for the OM-5 Mark II. When components at different heights need to be in focus, I want a stable set-up and a workable focus sequence. Around 29% of consumers prioritise greater depth of field.
Artificial light and reflections Test the white balance, shutter settings and lighting angles with the lamp you use; check which flicker-reduction features your camera model offers. If I take photos under workbench lighting, I want to compare colours and minimise distracting reflections or banding. Around 21% of consumers give control over artificial lighting top priority.
Total system cost Compare what is included with the camera body against the macro lens, lighting and any accessories you need for a stable set-up. When putting together a practical kit, I want to compare the cost of the body with that of the components I need. Around 14% of consumers put total system costs first.

Common pitfalls

  • Assuming a camera body is a complete macro set-up

    A mirrorless camera has an interchangeable lens. Magnification depends on the specific lens and is not automatically included with a body or standard kit.

    Check what the kit includes, the lens mount, and the magnification of the included or separately selected lens.

    Your set-up may need a suitable macro lens and, possibly, a stable support or adapted lighting.

  • Confusing minimum focusing distance with the space in front of the lens

    Fujifilm measures the stated minimum focusing distance from the focal plane. This distance does not tell you how much room there is between the lens and the circuit board.

    Before deciding where to put your lights and camera, check the practical working distance at the magnification you plan to use.

    You may need a different lens or a modified lighting set-up to get the working space you want.

  • Expecting focus stacking to solve lighting problems

    A focus sequence combines images to increase depth of field; it will not fix reflections, colour casts or flickering artificial light.

    Stabilise the camera and circuit board, then test the lighting angle, white balance and shutter settings separately from the focus sequence.

    Testing the lighting and compositing images can take extra time.

  • Confusing the manufacturer’s warranty with all your statutory rights

    According to the Dutch Government, there is no fixed statutory warranty period in the Netherlands. A manufacturer’s warranty is separate from your statutory rights if a product is faulty.

    Keep your proof of purchase and contact the retailer if a product is faulty.

Relevant brands and lens combinations

Canon

The EOS R10 is an option if you want documented focus bracketing and in-camera compositing. The RF 100mm F2.8L Macro IS USM is a separate lens option.

  • Canon documents focus bracketing and in-camera compositing for the EOS R10.
  • The maximum magnification of 1.4× applies to the RF 100mm F2.8L Macro IS USM lens, not every Canon lens or the camera body on its own.

OM SYSTEM

The OM-5 Mark II is an option if you want to use in-camera focus stacking with a suitable Micro Four Thirds lens.

  • OM SYSTEM specifically lists Focus Stacking for the OM-5 Mark II.
  • Check that it works with your chosen lens and shooting settings; stacking will not fix reflections or changing light.

Nikon

The Z50II can be paired with a Z-mount macro lens, such as the NIKKOR Z MC 50mm f/2.8.

  • Nikon specifies a maximum magnification of 1:1 for the Z MC 50mm f/2.8.
  • This magnification applies to this lens, not every Z50II kit. At maximum magnification, allow for enough room for your workbench lighting.

Sony

The α6700 has an E-mount and can be paired with the separate FE 90mm F2.8 Macro G OSS.

  • Sony specifies a maximum magnification of 1.0× for the FE 90mm F2.8 Macro G OSS.
  • Sony’s guidance on reducing flicker depends on the camera model; check which settings are available on the body you choose.

Fujifilm

The X-S20 can be paired with the XF30mmF2.8 R LM WR Macro for macro photography.

  • Fujifilm specifies a maximum magnification of 1.0× and a minimum focusing distance of 0.1 m for this lens, measured from the focal plane.
  • That focusing distance does not tell you how much free space there is in front of the lens; check that your lights will fit.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I always need a 1:1 macro lens to photograph a whole circuit board?

No, not always. First decide on the framing and the smallest details you need to capture clearly; 1:1 is most relevant when you want small components to appear large in the image. Test your chosen lens on a circuit board of the size you plan to photograph.

How can I get components at different heights in focus?

Set up the camera and circuit board on a stable surface, then try a shot with a suitable aperture. If that is not enough, take a focus sequence and check whether your chosen camera body can composite it in-camera or whether you will need editing software.

What can I do about banding or changing colours under LED light?

Take test shots under the lamp you actually use. For compatible cameras, Sony recommends trying the mechanical shutter or a different shutter speed, among other options; the right setting depends on the model and light source. For consistent colours, set the white balance deliberately or shoot in RAW.

Which items should I include when comparing the total cost and warranty?

Compare the camera body, any included lens, the macro lens you need and accessories for a stable lighting set-up as one complete system. According to the Dutch Government, there is no fixed statutory warranty period in the Netherlands; if a product is faulty, contact the retailer.

Do I have 14 days to change my mind on every online purchase in the Netherlands?

No, not in every case. According to the Dutch Government, many distance purchases come with a 14-day cooling-off period, but exceptions may apply. Check whether the cooling-off period applies to your purchase and read the retailer’s information.