Start by checking the maximum magnification and working distance of a suitable macro lens. Then choose a camera body that suits the way you compose your shots and whether you plan to use focus bracketing. For raised details and shiny metal, a stable setup and adjustable lighting are key considerations: a short working distance can leave little room for lighting and make the camera visible in reflections.
Who is this setup for?
Collectors of small badges
If you want to capture engravings, wear and other fine details clearly, start by looking at the lens’s magnification and focusing distance. Canon Europe and Sony Netherlands describe maximum magnification as a feature of the macro lens.
Photographers of shiny metal
When photographing a badge on a small table, it’s important to have space to position the lighting and control reflections of the camera and photographer. Sony Netherlands warns that these reflections can show up on shiny subjects.
Documenting badges with raised details
If you want both raised edges and lower areas to appear sharp, consider a stable setup and focus bracketing or focus stacking. Canon Europe describes focus bracketing on models including the EOS R50, while the OM-5 Mark II manual describes focus stacking.
What should you look for?
| What to consider |
What should you check? |
Who is this important for? |
| Magnifying fine details |
Check the maximum reproduction ratio of the exact lens, its mount and whether the lens is included in the kit. |
If I want to make small engravings fill the frame, I start by choosing the lens magnification. Around 33% of consumers prioritise magnifying details above all else. |
| Capturing raised details sharply |
Check whether the camera model supports focus bracketing, how images are combined and whether the lens you choose is compatible. |
If I want both the edge and the surface to appear sharp, I look for focus bracketing and a stable setup. Around 27% of consumers prioritise depth of field. |
| Controlling reflections and lighting |
Compare the working distance from the front of the lens at the magnification you need, and check whether there’s room to adjust the lighting and shooting angle. |
With shiny metal, I want to be able to position the lighting without the camera or photographer creating distracting reflections. Around 20% of consumers prioritise reflection control and working space. |
| Putting together a complete setup |
Check whether the product is a body-only package or a kit, and whether the lens, support and lighting suit your setup. |
If I want to put together a practical tabletop setup, I look at the whole combination, not just the camera body. Around 20% of consumers prioritise the complete setup. |
Common buying mistakes
-
Assuming every macro lens offers 1:1 magnification
The macro label alone doesn’t tell you the lens’s reproduction ratio. Canon states that the RF 35mm F1.8 MACRO IS STM offers a maximum ratio of 1:2; Nikon lists an actual ratio of 0.67× for the Z DX MC 35mm f/1.7.
Compare the stated reproduction ratio of the exact lens and decide whether it will make small badges appear large enough.
You may need a different lens to capture very small details.
-
Confusing focusing distance with working distance
Focusing distance is measured from the sensor; working distance is the clear space between the subject and the front of the lens. This difference affects how much room is left on the table for lighting.
Check both distances at the magnification you need, and allow space for lighting and adjustments to the shooting angle.
-
Choosing based only on the camera body or resolution
Magnification and working distance depend on the lens, not just the body. A stable camera support may also be part of a macro setup.
Compare the body with a compatible lens, and check that your preferred support and lighting will fit into the setup.
A macro lens and a stable tabletop setup may need to be bought separately.
Camera brands to consider
Canon
The EOS R50 is worth considering if you’re looking at a compact RF setup with focus bracketing.
- Canon Europe says the EOS R50 supports RF and RF-S lenses and offers focus bracketing.
- The EOS R50 doesn’t have in-body image stabilisation. Canon lists a maximum ratio of 1:2 for the RF 35mm F1.8 MACRO IS STM, not 1:1.
Nikon
The Z50II with a compatible Z macro lens is worth considering if you want to factor in the space available in front of the lens.
- Nikon lists a working distance of around 7.2 cm for the Z DX MC 35mm f/1.7 at its closest focusing distance.
- The lens has an actual maximum reproduction ratio of 0.67×. Nikon’s 1:1 figure refers to a 35mm/FX-format equivalent.
Sony
An APS-C body with an E-mount and the E 30mm F3.5 Macro is a combination worth researching for close-up tabletop shots.
- Sony lists 1:1 magnification for the lens and a working distance of around 2 cm in its lens guide.
- The short working distance leaves little room for lighting. Sony also warns that the camera or photographer may be visible in reflective subjects.
Fujifilm
The X-T5 with the XF30mmF2.8 R LM WR Macro is a combination to consider if you want to weigh up the stated resolution and magnification.
- Fujifilm specifies 40.2 effective megapixels for the X-T5 and 1:1 magnification for the XF30mm.
- Fujifilm says the subject almost touches the front of the lens at the closest focusing distance, which limits where you can position the lighting.
OM SYSTEM
The OM-5 Mark II is worth considering if focus stacking is part of your workflow for badges with raised details.
- The OM-5 Mark II manual describes focus stacking; OM SYSTEM lists 1:1 magnification for the M.Zuiko Digital ED 60mm F2.8 Macro.
- Check that your chosen lens is compatible, and distinguish the minimum focusing distance measured from the sensor from the clear working space in front of the lens.
Products on Joybuy
Related products coming soon.
Frequently asked questions
Do I need a macro lens for badges, or will a kit zoom lens do?
It depends on the badge and the details you want to show. Compare the maximum magnification and closest focusing distance of the lens actually included in the kit; the EOS R50 body doesn’t determine the magnification on its own.
How can I stop the camera reflecting in a metal badge?
Check for reflections from your chosen shooting angle and move the camera or lighting if needed. Sony warns that the camera or photographer may be visible in reflective subjects. A longer working distance can give you more room to adjust the setup.
How can I get a badge with raised details sharp all over?
Keep the badge and camera stable, and see whether taking a series of shots at different focusing distances suits your workflow. Focus bracketing creates this kind of series; focus stacking combines the images. Check which feature is supported by the exact camera model and lens you’ve chosen.
What costs and rights should I consider when buying online in the Netherlands?
Check whether the lens and the support you need are included in the product offer: a body on its own won’t give you a complete macro setup. The Government of the Netherlands states that, in many cases, you have a 14-day cooling-off period for online purchases. Consumers are also entitled to a product that is in good condition; there is no general, fixed statutory guarantee period in the Netherlands.
Can I publish photos of vintage badges online without permission?
There’s no general yes or no; it depends on the content and how you use the photo. Before publishing, check whether you’re using someone else’s work that is protected by rights, and whether identifiable people or personal data appear in the image. The Government of the Netherlands and the Dutch Data Protection Authority explain these considerations.