Who is this setup suitable for?

Collector of small buttons

You want to capture markings, holes and the texture of the material clearly. The magnification you need and the space available for lighting both help determine which lens is right for you. Nikon Netherlands explains why a stable setup matters for macro photography.

Documenter of buttons with raised details

You also want to capture raised patterns in sharp focus. A stable setup and, if supported by your chosen combination, focus stacking may help. Canon Netherlands and OM SYSTEM describe focus and stacking features for specific camera bodies.

Seller or cataloguer

You want to photograph buttons consistently, without distracting shine or an inaccurate impression of their colour. Canon Netherlands covers white balance and RAW capture; the Canadian Heritage Information Network recommends taking a colour reference shot when setting up new lighting.

What should you look for when choosing?

Canon EOS R10 with an RF macro lens

A good fit if: you want to combine a focus bracket of still buttons in the camera. Canon describes focus bracketing and focus stacking for the EOS R10.

Bear in mind: Canon lists a maximum magnification of 0.5× for the RF 85mm F2 Macro IS STM; the separate RF 100mm F2.8L Macro IS USM reaches 1.4×. Check how much magnification your details require.

OM SYSTEM OM-5 Mark II with M.Zuiko 60mm Macro

A good fit if: you want in-camera Focus Stacking and a relatively lightweight macro setup. OM SYSTEM gives the separate lens a true maximum magnification of 1:1.

Bear in mind: the 2× figure given by OM SYSTEM is a 35mm equivalent, not a true reproduction ratio of 2:1. Check that the feature works with your chosen lens and settings.

Sony α6700 with FE 90mm F2.8 Macro G OSS

A good fit if: you want to shoot focus brackets and are happy to combine them later in software. Sony lists a maximum magnification of 1.0× for the separate lens.

Bear in mind: Sony says that third-party software is required for focus stacking sequences shot with the ILCE-6700.

Nikon Z50II with NIKKOR Z MC 50mm f/2.8

A good fit if: you want a Z system with a separate 1:1 macro lens and can test the space around the button beforehand. Nikon says the lens can also be used on a DX body.

Bear in mind: Nikon gives the distance between the front of the lens and the subject as around 5 cm at the closest focusing distance. This could limit the space available for lighting a shiny button.

Fujifilm X-S20 with XF80mmF2.8 Macro

A good fit if: you want to consider an X system with a separate macro lens and factor in the space between the camera and your setup.

Bear in mind: Fujifilm specifies stabilisation in both the body and this lens. These specifications alone don’t tell you how sharp your images will be or how colours will look with your buttons and lighting.

What to consider What should you check? Who should pay particular attention?
Magnification Compare the lens’s true maximum magnification, mount and working distance in front of the lens. If you want to capture small markings or holes clearly, how much of the frame the subject fills is crucial. Around 26% of consumers make magnification their top priority.
Depth of field Check whether the body and lens support focus bracketing together, and whether stacking takes place in the camera or needs to be done later. If you want raised details to be sharp from front to back, you’ll also need to consider how the images will be combined. Around 21% of consumers prioritise depth of field.
Colour accuracy Check whether you can adjust the white balance and shoot in RAW; if you’re using a fixed lighting setup, consider taking a reference shot. If you want to compare colours across catalogue images, consistent lighting helps you assess them. Around 21% of consumers prioritise colour comparison.
Reflections and flicker Test your own buttons and lights; check which shutter or anti-flicker settings are available on the exact camera model. If you’re photographing shiny buttons or seeing stripes under LED lighting, first check how your own setup performs. Around 16% of consumers make light control their top priority.
Complete setup Check whether the offer includes a body, kit lens or suitable macro lens, and whether you’ll need software for stacking. If you want to know in advance which components you’ll need, look beyond the body alone. Around 16% of consumers prioritise a complete setup.

Common buying pitfalls

  • Assuming a body or standard kit is a complete macro setup

    The body alone doesn’t determine how large a detail will appear on the sensor. You may need a separate compatible macro lens to achieve the magnification you want.

    Before buying, check the lens mount, the exact contents of the box and the lens’s true maximum magnification.

    A complete setup may also require a separate lens and a stable way to take your photos.

  • Assuming all lenses labelled ‘macro’ offer the same magnification

    Canon lists a maximum magnification of 0.5× for the RF 85mm F2 Macro IS STM and 1.4× for the RF 100mm F2.8L Macro IS USM. So the product name alone doesn’t tell you how much of the frame a small detail will fill.

    Choose based on the size of the smallest detail you want to show, and compare the stated magnification of the exact lens.

  • Confusing focus bracketing with a completed focus stack

    Capturing a series of focus points and combining them are separate steps. Sony says that third-party software is required to focus stack sequences shot with the ILCE-6700.

    For your chosen body and lens, check both how to capture the sequence and how the final image will be put together.

    If you need to combine the images afterwards, allow for extra processing time and possibly separate software.

  • Trying to fix colour casts or reflections simply by switching cameras

    Artificial light affects colour, while shiny surfaces can reflect your photography setup. The light source and the way it falls on the subject also make a difference.

    Take test shots with your own buttons and lights, set the white balance deliberately and try diffused lighting if you’re dealing with glare.

Camera brands to consider

Canon

The EOS R10 is worth considering if you want to combine focus brackets in the camera with a compatible RF lens.

  • Canon describes focus bracketing and focus stacking for the EOS R10.
  • Canon doesn’t list in-body sensor-shift stabilisation for the body. The separate RF 85mm Macro has a maximum magnification of 0.5×; the RF 100mm Macro reaches 1.4×. Choose according to how much of the frame you want your subject to fill.

OM SYSTEM

The OM-5 Mark II with a separate M.Zuiko 60mm Macro is an option if you’re looking for a portable setup with Focus Stacking.

  • OM SYSTEM lists Focus Stacking for the body and a true maximum magnification of 1:1 for the lens.
  • The stated 2× is a 35mm equivalent. Check that the feature works with your chosen lens and settings, and find out which components are included in the kit.

Sony

The ILCE-6700 with a separate FE 90mm macro lens suits a workflow where you process focus brackets later.

  • Sony documents focus bracketing for the ILCE-6700 and lists a maximum magnification of 1.0× for the lens.
  • Sony says third-party software is required to focus stack the sequence.

Nikon

The Z50II with a separate Z macro lens is a way to capture details that fill the frame, provided there’s enough space around the button.

  • Nikon gives the Z MC 50mm f/2.8 a maximum magnification of 1:1 and says it can be used on a DX body.
  • At the closest focusing distance, Nikon gives the distance between the front of the lens and the subject as around 5 cm. Bear this in mind when positioning your lights.

Fujifilm

The X-S20 with the separate XF80mmF2.8 R LM OIS WR Macro is worth considering if you want to compare X-system setups with a macro lens.

  • Fujifilm specifies stabilisation in the body and separately in the lens.
  • These specifications alone don’t determine sharpness or colour accuracy with your buttons and lighting. Check the magnification and focusing method you need.

Related Joybuy products

Related products coming soon.

Frequently asked questions

Is a kit lens enough for a button with a small marking?

It depends on how much of the frame you want the button to fill. Compare the kit lens’s maximum true magnification with that of a suitable macro lens; the word ‘macro’ doesn’t indicate a specific magnification on its own.

How can I get a raised button sharp across more of its depth?

Set up your camera and button securely, and only shoot a sequence of different focus points if your chosen combination supports it. Canon describes in-camera stacking for the EOS R10, and OM SYSTEM lists Focus Stacking for the OM-5 Mark II; Sony says third-party software is needed for sequences shot with the ILCE-6700.

What can I do if LED lighting causes stripes in my photos?

First, take a test shot with your own lights and check which settings your camera model offers. Sony recommends trying a different shutter type or shutter speed, depending on the model. Not every model has an anti-flicker feature, and it isn’t guaranteed to work with every light.

How can I make button colours easier to compare between shots?

Keep your lighting setup consistent, set the white balance deliberately and take a reference shot whenever you set up new lighting. The Canadian Heritage Information Network recommends taking a reference shot when you set up new lighting; RAW gives you room to adjust the white balance later.

Do I need to combine the images in a focus bracket myself?

It depends on the camera body and the workflow you choose. Canon describes focus bracketing and in-camera stacking for the EOS R10, and OM SYSTEM lists Focus Stacking for the OM-5 Mark II; Sony says third-party software is needed to combine sequences shot with the ILCE-6700.