Who is this choice relevant to?

Photographers capturing fine crystal details

You want to fill the frame with a small crystal face or inclusion. So, look beyond the camera itself: consider the maximum magnification of your chosen lens and the space you’ll need to take the shot.

Photographers capturing specimens with depth

You want to capture protruding points and lower sections in sharp focus. Compare how each camera body takes a series of shots at different focus distances, and whether it merges them in-camera.

Photographers documenting mineral colour

You want to photograph specimens under consistent lighting and be able to adjust the white balance. Canon UK says that shooting in RAW gives you the flexibility to correct white balance during editing.

What should you look for when choosing?

Start with your preferred framing and the space you have available. Then compare the focusing workflow, lighting setup and how you want to capture colour.

What to consider What to look for when buying Who is this important for?
Magnifying fine details Compare the maximum magnification and mount of the exact lens with the framing you want. Also measure the space available for the lens and lighting. If I want small crystals to fill the frame, magnification is my first consideration; around 33% of consumers put magnification for detail first.
Capturing depth in focus Check whether the camera body can take a focus series, whether it merges the images itself and whether the feature works with your chosen lens. A stable setup helps minimise movement between shots. If you want protruding crystals to look sharp from front to back, focus on the focusing workflow; around 27% of consumers choose depth of field as their top priority.
Controlling colour and light Check that you can shoot in RAW and set the white balance. Allow space on the table for your light source. If I want to capture mineral colours under consistent lighting, I look at white balance and editing; around 20% of consumers prioritise colour control.
Setting up on a table Measure where the camera, mineral and lighting will go. The minimum focusing distance does not automatically tell you how much clear space there’ll be in front of the lens. When the camera, specimen and lighting all need to fit on a small table, I start by checking the available space; around 20% of consumers say a practical tabletop setup is their top priority.

Common buying mistakes

  • Assuming every lens labelled ‘macro’ offers the same magnification

    Maximum magnification varies between lenses. Canon lists a maximum of 1:2 for the RF 35mm F1.8 Macro; Nikon and Sony specify 1:1 for the individual macro lenses mentioned.

    Compare the maximum magnification of the exact lens with the size of your smallest specimen and the framing you want.

    You may need a different lens if your chosen one doesn’t offer enough magnification.

  • Assuming a focus series automatically creates a merged image

    A camera body may take several shots at different focus distances without merging them itself. The documented workflows vary between cameras.

    Check whether the exact camera body and lens combination only takes the series or also merges the images.

    Merging the images separately may take extra time.

  • Assuming the minimum focusing distance is the same as working space

    The focusing distance doesn’t necessarily tell you how much room there’ll be in front of the lens for the mineral and lighting.

    Measure or mock up the full setup, including the camera, lens, specimen and light source.

  • Confusing a manufacturer’s warranty with your full statutory rights

    According to the Dutch government, statutory consumer rights in the Netherlands don’t have a fixed time limit; a manufacturer’s or retailer’s warranty is separate.

    Check what any additional warranty covers, and contact the retailer if something is faulty.

Camera brands to consider

Canon

For those considering an APS-C camera body with a focusing and merging workflow described by Canon.

  • Canon describes depth compositing on the EOS R50. According to Canon, the RF 35mm F1.8 Macro has a maximum magnification of 1:2; the separate RF 100mm F2.8L Macro has a stated maximum magnification of 1.4×.
  • These lens specifications don’t automatically apply to a kit lens. Also check that your chosen lens is compatible with the camera body.

OM SYSTEM

For those considering a compact camera body with the manufacturer’s Focus Stacking feature.

  • OM SYSTEM lists Focus Stacking for the OM-5 Mark II. The manual for the separate M.Zuiko ED 60mm F2.8 Macro specifies a magnification of 1:1.
  • Check that the feature works with the specific camera body and lens combination you’re considering.

Nikon

For those looking to pair their camera body with a separate Z-mount macro lens.

  • Nikon specifies a magnification of 1:1 for the NIKKOR Z MC 50mm f/2.8.
  • This magnification specification doesn’t automatically apply to a lens supplied with a Z50II kit. The Z50II’s product review mode isn’t a focus stacking feature.

Sony

For those considering the α6700 for its automatic focus series feature, alongside a separate macro lens.

  • Sony describes Focus Bracket for the α6700 and specifies a magnification of 1:1 for the separate E 30mm F3.5 Macro.
  • Focus Bracket takes a series of shots; don’t assume the camera also merges them without checking. Also check which lens is included with the version you choose.

Panasonic

A Micro Four Thirds option for those considering a LUMIX G camera body with a separate macro lens.

  • Panasonic specifies the H-ES045 as a macro lens with a magnification of 1:1.
  • The Dutch product page reviewed marks the H-ES045 version as unavailable; this doesn’t indicate which other LUMIX G combination would be suitable.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need a 1:1 macro lens for every small specimen?

No, not if your chosen lens can already capture the specimen at a suitable size. Compare the framing you want at your shooting distance, and check the magnification specification of a compatible macro lens for very fine details.

Do I need to merge focus series images myself?

It depends on the camera body and workflow. Canon describes in-camera merging on the EOS R50; Sony describes automatic focus series shooting for the α6700. Check whether the images are merged in-camera for the exact camera and lens you’re considering.

How can I keep a focus series stable on a small table?

Keep the camera and specimen steady, and make sure they don’t move between shots. Canon UK recommends a sturdy tripod to keep the images in a focus series properly aligned.

What else should I check besides the camera body?

Check what’s included with the exact version and whether the supplied lens offers the magnification you need. Models such as the α6700 may be available as a body only or with a lens; also make sure your table has room for the lens and lighting.

What warranty and cooling-off period apply when buying in the Netherlands?

According to the Dutch government, statutory consumer rights in the Netherlands don’t have a fixed time limit; the retailer is your point of contact if something is faulty. In many cases, purchases made at a distance are covered by a 14-day cooling-off period, with some exceptions. A manufacturer’s warranty is a separate promise.