Who is this for?

Voice actors who can hear booth noise

You can hear ventilation, traffic or unwanted reflections in your test recordings, and want to know whether recording closer to the microphone would work better than using a sensitive studio microphone.

Voice actors with a wide range of volumes

You switch between quiet and loud characters and want to manage peaks without losing softer dialogue. Both your recording settings and the distance from the microphone matter.

Creators who want to get started without an interface

You want to record a single voice directly to a computer, but may want to switch to an XLR setup with an audio interface later.

What should you look for?

A condenser microphone for a quiet booth

A good fit if: test recordings pick up few distracting reflections or equipment noises, and you want to compare how well soft vocal details come through.

Bear in mind: a sensitive microphone may also pick up unwanted sounds from the booth.

Recording close up with a dynamic microphone

A good fit if: booth noise is distracting in your test recording and you can stay close to the microphone.

Bear in mind: speaking close to the microphone means watching out for plosives and extra bass. Also check how much preamp gain you’ll need.

What to consider What to check before buying Who might find this more important?
Booth noise and reflections Record quiet and loud dialogue in the same spot, then listen for ventilation, reflections and plosives. If I can hear ventilation or reflections, I want to know whether recording closer will help. Around 31% of consumers prioritise reducing booth noise.
Detail in quieter voices Compare a quiet line recorded in your own space, listening for clarity and background noise. If you want to preserve soft articulation, check that it remains clear in your own room. Around 25% of consumers prioritise vocal detail in quieter passages.
Loud and varying voices Test your loudest line at the planned distance. Also check the recording mode and software. If your characters switch from whispering to shouting, you’ll want to know whether peaks are captured cleanly. Around 25% of consumers prioritise managing loud vocal peaks.
Connection and complete setup Check how it connects to your computer and whether you’ll need an interface, phantom power, extra preamp gain, a cable, a stand or a pop shield. If you want to get started without a separate interface, check in advance what else you’ll need for your chosen connection. Around 19% of consumers prioritise ease of connection and a complete setup.

Common pitfalls

  • Assuming a small booth will automatically sound quiet

    A small room can still pick up ventilation noise or reflections in your recording. The recording distance affects how much of your voice and the room noise is captured.

    First, make test recordings in your own booth using quiet and loud dialogue. Compare microphone placement before relying on the specifications alone.

    Trying different microphone positions and acoustic treatments can take extra time.

  • Assuming every XLR microphone connects directly to a computer

    To record to a computer with an XLR microphone, you’ll need a suitable signal chain. Power and preamp requirements vary by model.

    Check the complete setup for the exact model, not just whether the plug fits.

    You may also need an interface, cable or additional preamp gain.

  • Thinking 32-bit float protects against all distortion

    According to RØDE, the NT1 5th Generation’s 32-bit float output works only via USB and requires compatible software. Exceeding the maximum sound pressure level can still cause distortion.

    Check that your software supports the recording mode, and test your loudest character voice at the intended distance.

Brands to consider

RØDE

The NT1 5th Generation is a cardioid condenser microphone with USB and XLR connections, designed for voice recording.

  • According to RØDE, the NT1 5th Generation has a quoted self-noise of 4 dBA; a pop shield, shock mount and cables are included.
  • The 32-bit float output works only via USB and with compatible software. Exceeding the maximum sound pressure level can still cause distortion.

Shure

The SM7B is a dynamic XLR microphone for close-miked speech, while the MV7+ is a separate model with USB-C and XLR.

  • Shure lists narration among the suitable uses for the SM7B.
  • For voice-over with the SM7B, Shure recommends at least 60 dB of preamp gain. The MV7+’s digital features and noise-reduction claims don’t prove that an untreated booth will sound quiet.

Samson

The Q2U is a dynamic cardioid microphone with USB and XLR connections for a compact setup.

  • Samson lists a headphone output, windscreen, desktop stand and cables as included with the Q2U.
  • Samson’s stated reduction of ambient noise doesn’t guarantee that reflections or ventilation noise will disappear from your booth.

Sennheiser

The MK 4 is a cardioid large-diaphragm condenser microphone for an XLR studio setup.

  • Sennheiser specifies equivalent noise of 10 dB(A) and a maximum sound pressure level of 140 dB for the MK 4.
  • The MK 4 requires 48 V phantom power. These quoted figures aren’t directly comparable with real-world tests of other brands.

Audio-Technica

The AT2020 is a cardioid XLR condenser microphone for home and project studio recording. Don’t confuse it with USB versions in the same product family.

  • Audio-Technica lists an XLR output and an included stand mount for the AT2020.
  • For a computer setup, check which connection and other components you’ll need. The product information doesn’t demonstrate a performance advantage in a small booth.

Joybuy products for voice recording

This selection includes USB desktop microphones and wireless microphones for voice recording. Check that each model’s connection and setup suit your recording space.

SYNCO P2XT USB-C wireless microphone

SYNCO P2XT USB-C Wireless Microphone

This wireless lavalier microphone is designed for mobile voice recording. Check that the USB-C connection is compatible with your device.

OTG must be enabled for use with Android.

View at Joybuy
Cardioid USB condenser microphone

USB Cardioid Condenser Microphone

A USB desktop microphone could be a good fit if you’re looking for a permanent computer setup for voice recording.

The product name specifies USB and a cardioid pickup pattern. Check that the connection is compatible with your recording software.

View at Joybuy
DJI Mic 3 with one transmitter and one receiver

DJI Mic 3 (1 TX + 1 RX)

This wireless model could suit a portable recording setup. Check that it connects to your phone, camera or Android device.

The product description mentions adaptive gain control for whispering and shouting. Test it with your character voices and recording distance.

View at Joybuy
DJI Mic 3 with two transmitters, one receiver and charging case

DJI Mic 3 (2 TX + 1 RX) with Charging Case

This wireless set is designed for use with two transmitters and one receiver. Check that this configuration suits your recording needs.

The product name lists two transmitters, one receiver and a charging case.

View at Joybuy
HyperX SoloCast 2 USB cardioid microphone, black

HyperX SoloCast 2, USB, Cardioid, Black

This USB microphone could suit a permanent desktop setup for voice recording.

The product name specifies USB and a cardioid pickup pattern. Check that the connection is suitable for your computer.

View at Joybuy

Frequently asked questions

Do you always need to choose a condenser microphone for a small recording booth?

No. Start by listening to a test recording at the intended distance: if you can hear reflections or ventilation, it may be worth comparing a dynamic microphone used close up. In a quiet booth, you can also assess how well a condenser captures vocal detail.

How can you reduce plosives when recording character voices?

Try a suitable windscreen or pop shield and keep the distance consistent during your test recording. Shure specifies a speaking distance of 2.54 to 15 cm for the SM7B; this range won’t necessarily apply to every microphone model.

What equipment do you need for an XLR microphone?

To record to a computer, you’ll need a compatible audio interface and an XLR cable. Check the model’s requirements too: the Sennheiser MK 4 requires 48 V phantom power, while Shure recommends at least 60 dB of preamp gain for voice-over with the SM7B.

Can you return a microphone bought online in the Netherlands, and what if it’s faulty?

For many distance purchases made by consumers from a business, you have 14 days to change your mind. Check the applicable terms and exceptions. The Dutch government also states that goods must meet the legal guarantee of satisfactory quality, with no fixed statutory guarantee period. If there’s a fault, contact the seller.