Who is this guide for?

Singer in a reverberant hall

You want your solo voice to sound clear in the recording and can sing close to the microphone. Mic placement affects the balance between your voice and the reverberation; a microphone won’t make the hall’s acoustics sound dry.

Singer looking to capture room ambience

You’re recording in a quiet hall and want to decide how much vocal detail and natural room sound comes through in the recording.

Singer recording in different locations

You may also use the microphone at rehearsals or switch between recording via a computer and using an audio interface. Connection options and ease of use will then also influence your choice.

What should you consider when choosing?

Cardioid dynamic vocal microphone with XLR

A good fit if: you can sing close to the microphone, the hall is reverberant or you’d also like to hold the mic at rehearsals.

Bear in mind: you’ll need a suitable XLR recording setup; the microphone won’t remove the hall’s reverberation.

Cardioid condenser microphone with XLR

A good fit if: the hall is quiet enough and your recording equipment can provide the power required by your chosen model.

Bear in mind: vocal detail may come with clearly audible reverberation and background noise; also check the cable and pop protection.

Cardioid condenser microphone with USB and XLR

A good fit if: you sometimes want to record directly to a computer and sometimes via XLR, and the acoustics suit your recording.

Bear in mind: having two connection options won’t change the room’s acoustics; point the front of a side-address studio microphone towards the singer.

What to consider What to look for when buying Who is this most important for?
Keeping vocals clear in a reverberant space Check the polar pattern and whether singing close to the mic is practical; Shure explains that placement affects the balance between direct sound and reflections. When I sing in a reverberant hall, I want my voice to sound clear up close without the room overpowering it. Around 40% of consumers put controlling reverberation at the top of their list when buying.
Vocal detail and the amount of room sound Listen to a test recording in the hall first, and check the correct pickup side, pop protection and power requirements. I want to hear vocal detail and choose how much of the hall’s sound comes through. Around 30% of consumers say vocal detail is their main priority when buying.
Connections and required components Check the output, the input on your recorder or interface, whether phantom power is needed, and which cables and mounting components are included. My first concern is making sure the microphone connects to my computer or recording equipment and that I have everything I need. Around 20% of consumers prioritise a compatible, complete setup.
Ease of use in different situations Think about whether you’ll record handheld or on a stand, and check which mount is compatible with your chosen model. If I also want to use the microphone at rehearsals, what matters most to me is being able to hold or position it easily. Around 10% of consumers name ease of use as their main priority when buying.

Common pitfalls

  • Choosing a condenser microphone because you think it will filter out reverberation

    More vocal detail can also mean clearly audible reflections from the hall. A different microphone won’t fix the acoustics.

    Make a test recording and compare different positions before deciding how much room sound you want to capture.

    Trying different positions or finding a quieter spot may take extra preparation time.

  • Comparing microphones on their own and forgetting the rest of the recording setup

    An XLR microphone doesn’t automatically give you a complete computer setup. Depending on the model and your equipment, you may also need an interface, cable, stand or pop filter.

    Compare what’s included in the box with the equipment you already have, and check the power requirements of the exact model.

  • Pointing a handheld vocal mic and a side-address studio microphone in the same way

    If the microphone is facing the wrong way, its active front won’t be properly directed towards the singer, which can affect the recording.

    Check the manual to find the correct side, then listen back with the microphone in that position. For the NT1 5th Generation, RØDE says the gold dot marks the front.

Brands to consider

Shure

The SM58 is a cardioid dynamic vocal microphone for singing close to the mic and handheld use at rehearsals.

  • Shure lists built-in wind and pop protection, with a design made for vocals.
  • The SM58 won’t remove room reverberation; recording via XLR requires suitable recording equipment.

Sennheiser

The e 835 is a cardioid dynamic XLR vocal microphone for situations where holding the mic and moving around are important.

  • Sennheiser specifies a metal housing and a shock-absorbing suspension for this model.
  • Check that the required XLR recording equipment is suitable for your setup.

Audio-Technica

The AT2020 is a cardioid XLR condenser microphone for vocal recording with a suitable powered recording setup.

  • Audio-Technica lists vocals as one of the AT2020’s applications.
  • Audio-Technica says this model has no USB connection and that an XLR cable is sold separately; also check which phantom power and other components you’ll need.

RØDE

The NT1 5th Generation is a cardioid studio microphone with a choice of USB and XLR connections.

  • RØDE specifies both connections and lists a pop filter, shock mount and cables as included.
  • The stated low self-noise is a product specification, not proof that room reverberation will be less audible. Point the front of the microphone towards the singer.

LEWITT

The LCT 240 PRO is a cardioid XLR condenser microphone for vocal recording with a suitable recording setup.

  • LEWITT lists a mount and windscreen as included with the standard version.
  • Check the phantom power required and whether your vocal setup needs additional pop protection.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Will a more expensive microphone automatically reduce reverberation in the hall?

No, a microphone won’t remove the room’s reverberation on its own. First, make a test recording with the microphone closer to the singer and compare different positions in the hall.

Can I connect an XLR condenser microphone directly to my laptop?

First check the connections on both the microphone and your recording equipment. Audio-Technica says the AT2020 has XLR and no USB, so you’ll need suitable recording equipment and the required power supply. According to RØDE, the NT1 5th Generation has both USB and XLR.

How should I position the microphone when recording in the hall?

Point the active front towards the singer and keep the singing distance as consistent as possible. Check the manual for mounting and pop protection; for the NT1 5th Generation, RØDE says the gold dot marks the front.

Which components and consumer rights should I consider when choosing?

Check which cables, recording equipment, stand and pop protection you need, and what’s included with your chosen model. For an online consumer purchase in the Netherlands, ACM ConsuWijzer says you generally have a statutory 14-day cooling-off period after delivery, with some exceptions. You’re also entitled to a product that meets what you could reasonably expect from it.

Can I publish a solo recording made in the hall without permission?

It depends on what’s in the recording and how you use it. The Dutch Government distinguishes between making a copy of music for personal use and distributing or making it available to the public; the latter may require the creator’s permission. If other people can be recognised by their voices, those voices may count as personal data. The Dutch Data Protection Authority says that processing data for purposes beyond purely personal or household use requires an applicable legal basis under the GDPR. Also check separately that you have permission to use the hall.