Ensemble with several roles
Wants to record voices speaking at the same time separately and balance them later. Shure describes recording voices on separate tracks as a way to adjust them individually in the mix.
For a radio play in a rehearsal room, individual microphones close to the performers are a good choice if you want to balance their voices separately later. A shared microphone works well when the room sound is part of the scene and separate balancing is less important. Shure explains that recording voices separately and positioning the microphone close to the sound source can give you more control over voices and room sound. If performers move around, you’ll need to adjust the microphone position or use a setup that moves with them. Also check the inputs, power requirements and, if you’re using a wireless system, the frequency band.
Wants to record voices speaking at the same time separately and balance them later. Shure describes recording voices on separate tracks as a way to adjust them individually in the mix.
Wants to keep voices clear despite the rehearsal room’s acoustics and can test different speaking positions. For unwanted room sound, Shure recommends positioning the microphone close to the sound source.
Wants a simple setup for one voice at a time, or needs to account for performers who won’t stay by a fixed microphone. As Shure explains in its advice on theatre recording, recording from a distance can make the voice sound less close.
Start by making a test recording from the actual performance positions. Then decide whether separate tracks, freedom of movement or a simple fixed setup matters most.
| What to consider | What to look for when buying | Which consumers should pay particular attention? |
|---|---|---|
| Clarity and reverberation | Test how clear the voices sound from the intended speaking distance, and listen for reverberation and unwanted noise. | If the rehearsal room is reverberant, I want to know first whether voices will still be clear from the actual performance distance; around 36% of consumers say clarity and reverberation are their main concern. |
| Separate voices | Count the roles speaking at the same time and check how many microphones can be recorded separately. | When several roles speak at once, I want to be able to balance their voices separately later. Around 29% of consumers prioritise separate tracks. |
| Freedom of movement | Decide whether performers can stay in fixed speaking positions. If you’re using a wireless system, check the frequency band and location. | If performers move around during a scene, I don’t want to rely entirely on one fixed speaking position; around 14% of consumers say freedom of movement is their main concern. |
| Connections and setup | Check whether you need USB or XLR, how many inputs you’ll need and, for the AT2020, 48 V phantom power, as specified by Audio-Technica. | For one voice at a time, I want a connection that works with my recording device and a straightforward setup. Around 21% of consumers prioritise easy connection. |
Microphone placement and the rehearsal room’s acoustics affect how much direct voice and room sound is recorded. A microphone placed further away won’t automatically pick up less reverberation.
Start by making test recordings in the actual location, then compare different distances and performance positions.
Testing may take extra time for test recordings and adjustments to the recording position.
If several roles speak at once, you won’t be able to balance them separately afterwards if everything has been captured as a single recording.
Count the roles speaking at the same time and check how many separate microphone inputs and recording tracks your recorder or interface provides.
According to Audio-Technica, the Audio-Technica AT2020 requires full 48 V phantom power via XLR.
Before buying, check that your recorder or interface supplies this power and that you’re choosing the XLR version.
Available frequency space varies by location in the Netherlands. Some frequency bands require a licence, according to the Dutch Authority for Digital Infrastructure.
Before using the system, check its frequency band and the frequencies available at the recording location.
Shure describes the SM58 as a dynamic cardioid microphone for vocals and speech, including studio recording.
Sennheiser describes the e 835 as a wired dynamic cardioid microphone for speech and vocals, with a 3-pin XLR connection.
RØDE’s PodMic USB is a dynamic microphone with USB-C and XLR connections. The NT1 5th Generation is a cardioid condenser microphone with both connection types.
Audio-Technica describes the AT2020 as a cardioid XLR condenser microphone for a fixed recording position.
This selection includes wireless microphone systems for performers who move around, as well as a USB microphone for a fixed speaking position.
No image available
This set may suit a scene with two moving performers who each need a transmitter.
Bundle contents according to the product name: 2 TX, 1 RX and Charging Case. Before use, check the frequency band and frequencies available at the recording location in the Netherlands. Some bands require a licence, according to the Dutch Authority for Digital Infrastructure.
No image available
A portable lavalier setup may be a good fit if a performer won’t stay in one fixed speaking position during the scene.
The product name specifies 48 kHz/24-bit and a transmitter weight of 9 g. Before use, check the frequency band and frequencies available at the recording location in the Netherlands. Some bands require a licence, according to the Dutch Authority for Digital Infrastructure.
No image available
This wireless USB-C setup may suit a mobile recording position. Check in advance that the receiver is compatible with your recording device.
The product name describes a wireless microphone with USB-C. Before use, check the frequency band and frequencies available at the recording location in the Netherlands. Some bands require a licence, according to the Dutch Authority for Digital Infrastructure.
No image available
This set may suit one performer with their own wireless transmitter. Check that the connections are compatible with your recording device.
Bundle contents according to the product name: 1 TX and 1 RX. Before use, check the frequency band and frequencies available at the recording location in the Netherlands. Some bands require a licence, according to the Dutch Authority for Digital Infrastructure.
No image available
This USB microphone may suit a fixed speaking position. Choose a different position if the performer moves around the room during the scene.
The product name specifies a USB microphone in the White variant. Check that the USB connection is compatible with your recording device.
It can, if a shared recording and the audible room sound suit the scene. If you want to adjust voices independently later, record them separately. Shure advises that recording from a distance won’t give you the same close-miked vocal sound.
Check that the microphone and recorder connections are compatible and that you have enough inputs. The Audio-Technica AT2020 requires full 48 V phantom power via XLR. Then make test recordings from the actual performance positions and listen for voices, reverberation and crosstalk.
RØDE recommends speaking from around 5–10 cm away from the PodMic USB, with the top of the microphone facing your mouth. This advice applies to this model and won’t automatically suit other microphones.
No, it depends on the frequency band. According to the Dutch Authority for Digital Infrastructure, some bands require a licence. Check the band used by your chosen system and the frequencies available at the recording location.
Don’t assume you have permission just because you recorded the scene yourself. The Dutch government states that you need the creator’s permission to use copyright-protected text and music. Performers may also have related rights. If you use identifiable voices as personal data when processing the recording, you need an appropriate legal basis under the GDPR, according to the Dutch Data Protection Authority; consent is one possible legal basis.