Who is this for?

Percussionist looking to reduce room noise

You want to record individual hits clearly while keeping traffic, housemates or reverberation less prominent, and you can position the microphone close to the source. Shure explains how a shorter distance affects the balance between direct sound and ambient noise in a recording.

Drummer with limited setup space

You want to close-mic a snare or tom without adding another stand beside the drum, and you’ll check whether a drum-rim clip fits your instrument. Sennheiser describes the e 604 as a compact microphone that attaches to the rim of a drum.

Creator making detailed percussion recordings

You want to capture cymbals, the interplay between instruments or a stereo image, and can arrange a suitable recording space and phantom power. AKG describes the P170 as suitable for percussion and overheads, among other uses; RØDE supplies the M5 as a matched pair.

What should you look for?

Close-miked dynamic microphone

A good choice if: you mainly want to record a single percussion source and reduce distracting room noise in the recording.

Bear in mind: positioning the microphone very close can colour the sound or capture only part of the instrument.

Compact microphone with a drum-rim clip

A good choice if: you want to record a snare or tom and have little room for a separate stand.

Bear in mind: check that the clip fits the rim of your instrument.

Small-diaphragm condenser or stereo pair

A good choice if: detail, overheads or the interplay between several percussion sources matters, and you can control the recording space.

Bear in mind: greater distance can pick up more room noise; check the phantom power requirements and number of inputs.

Shure explains that placing a microphone closer to the source can capture more direct sound in relation to reverberation and ambient noise. When it comes to noise affecting neighbours, the Dutch Government advises talking things through first, for example by agreeing on times for playing music.

What to consider What should you check? Who is this important for?
Sound in the recording Check the polar pattern and mounting; try a practical position close to the percussion source. If traffic, housemates or reverberation dominate my recording, I want to be able to close-mic the source. For about 36% of consumers, reducing unwanted noise in recordings is their main concern.
Noise for neighbours Distinguish between sound in the recording and sound that can be heard outside your home; a microphone is not sound insulation. If I’m mainly concerned about what my neighbours can hear, I want to know that a different microphone won’t solve the problem. Neighbour noise is the main concern for about 29% of consumers.
Detail and sense of space Decide whether you want to capture a single drum, cymbals or the interplay between instruments; consider the effect of the room and the distance. If I also want to record cymbals or the interplay between instruments, I’ll look at detail and stereo rather than focusing only on a single close-miked source. For about 21% of consumers, sound detail or stereo is their main concern.
Connections and setup Check the microphone input available, the power requirements of the exact model, and whether you need a clip, stand or extra cable. If I want to get started without missing connections or extra setup, I’ll first check what my recording equipment can handle. A straightforward setup that works is the main priority for about 14% of consumers.

Common buying mistakes

  • Confusing isolation in a recording with sound insulation for neighbours

    A microphone close to the source can change the balance between instrument sound and room noise in the recording, but it won’t make the instrument quieter in your home.

    First decide whether you want to improve the recording or reduce the noise your neighbours hear. The Dutch Government advises agreeing on arrangements to manage noise if it may disturb neighbours, for example by setting playing times.

  • Buying a condenser microphone without checking the power requirements

    According to its manual, the RØDE M5 requires P24 or P48 phantom power; AKG specifies 44–52 V for the AKG P170. Requirements therefore vary by model.

    Check the power specification for the exact model and make sure your recording equipment has the right power supply and a suitable input.

    Depending on your equipment, you may need a compatible power supply or recording interface, as well as suitable cables.

  • Assuming a stereo pair will automatically solve the problem of a noisy room

    More microphones or a greater distance can also capture more room and background noise. A stereo pair also needs to be set up appropriately.

    You could start with one well-positioned microphone and choose stereo if spatial detail is more important to your recording.

    A stereo pair may require extra stands, cables and a second compatible input.

Brands to compare

Shure

The SM57 is a cardioid dynamic instrument microphone for uses including drums, and is worth considering for a single close-miked source.

  • Shure describes source isolation and recommends placing the microphone close to the instrument.
  • Positioning still matters; recording very close can colour the sound.

Sennheiser

The e 604 is a compact cardioid dynamic microphone for snare drums, toms and other percussion, with a drum-rim mount.

  • The rim mount can be useful when there’s little room for a separate stand.
  • Check that the clip fits your instrument.

AUDIX

The i5 is a cardioid dynamic instrument microphone for a range of instruments, including percussion.

  • AUDIX lists a frequency range of 50 Hz–16 kHz and suitability for high sound pressure levels.
  • The manufacturer’s specifications don’t prove that the i5 will provide better isolation in every room; allow for a suitable holder and positioning.

AKG

The P170 is a small-diaphragm condenser microphone for uses including percussion and overheads.

  • AKG specifies a switchable −20 dB pad and a power range of 44–52 V.
  • Before buying, check that your recording equipment meets the power requirements.

RØDE

The M5 comes as a matched pair for anyone wanting to record percussion in stereo.

  • RØDE specifies two cardioid condenser microphones and P24 or P48 phantom power.
  • A pair needs to be set up appropriately and, depending on the positioning, may also pick up the sound of the room.

Related products

Related products coming soon.

Frequently asked questions

Will a cardioid microphone make my percussion quieter for the neighbours?

No. The polar pattern and positioning determine which sounds are picked up in the recording, but they won’t soundproof your home. When it comes to noise affecting neighbours, the Dutch Government advises talking things through first, for example by agreeing on times for playing music.

Where should I start when positioning the microphone?

Start with a practical position close to the source you want to record, and point the microphone away from distracting sounds. Listen to check whether the short distance colours the sound too much; according to Shure, increasing the distance raises the level of reverberation and ambient noise in relation to the direct sound.

Does the RØDE M5 need phantom power?

Yes. According to the RØDE manual, the M5 requires P24 or P48 phantom power via its XLR connection. Before buying, check that your recording equipment can supply this power.

What can I do if my microphone develops a fault earlier than expected during normal use?

When a consumer buys a product in the Netherlands, it must work as they can reasonably expect it to. According to ACM ConsuWijzer, the seller is responsible for providing an appropriate free solution if the product breaks too soon during normal use; a manufacturer’s warranty does not replace this right.