Who is this buying guide for?

Solo intro in a lively room

You’re recording the introduction yourself and want clear speech without room noise overpowering the recording. Being able to position a directional microphone close to you is an important factor in your choice. RØDE recommends a speaking distance of around 5–10 cm for the PodMic USB.

An easy way to start recording

You’re recording the intro on your own using a computer and don’t want to set up a separate audio interface. Check the USB connection and how you can monitor your voice while recording. Samson describes the Q2U as offering direct headphone monitoring.

Interviewing a guest who will also speak

Your guest will also speak during the intro and you want to adjust each voice separately. The number of microphones and independent inputs will determine which recording setup is right for you. Focusrite describes the Vocaster Two as having two independent microphone inputs.

What should you look for in a microphone for an interview intro?

Dynamic microphone, used close up

A good fit if: you’re recording on your own and can position the microphone close to your voice.

Bear in mind: you’ll need a suitable position and a test recording. USB connects directly to a computer, while XLR requires a compatible interface.

Separate microphones for two speakers

A good fit if: you and your guest are speaking at the same time and you want to adjust or record your voices separately.

Bear in mind: you’ll need one microphone per speaker, cables and an interface with enough independent inputs.

USB condenser microphone

A good fit if: you’re recording on your own in a sufficiently quiet room and want to compare this type of setup.

Bear in mind: listen to a test recording in your own space. The microphone alone won’t determine how much room noise you can hear.

What to consider What to look for when buying Who is this important for?
Clear speech in your own room Check the microphone’s pickup pattern, whether there’s room for a boom arm or stand, and make a test recording in the intended position. If I’m recording in a lively room, I want to be able to point the microphone accurately and hear how much room noise comes through. Around 36% of consumers prioritise clear speech in their own room.
Easy solo recording Check that it connects to your computer via USB and that you can monitor your voice through headphones while recording. For a solo intro, I want to record directly on my computer and hear myself while speaking. Around 29% of consumers prioritise getting started easily without a separate interface.
Recording two voices separately Check that you have two microphones and enough independent inputs, as well as the cables you need. When my guest is speaking too, I want to be able to adjust or record both voices separately. Around 21% of consumers prioritise recording two voices separately.
Condenser microphone in a quiet room Check the pickup pattern, headphone monitoring and stand. Listen to a test recording in the room where you’ll be recording. In a quiet room, I want to be able to compare a condenser microphone without assuming it will be a better fit everywhere. Around 14% of consumers say comparing a condenser microphone in a quiet room is their main consideration.

Common buying mistakes

  • Assuming a directional microphone will automatically fix a reverberant room

    A directional microphone needs to be positioned properly in relation to the speaker. The microphone type alone won’t guarantee that reverb or other room noise disappears.

    Make a test recording where you plan to record and listen to both your voice and the room noise.

  • Buying an XLR microphone as though it connects directly to your computer

    An XLR setup requires compatible recording equipment. For the Wave DX, Elgato lists an XLR interface, XLR cable and stand or boom arm as requirements.

    Compare the equipment you’ll need with a USB microphone if you want to record directly onto a computer.

  • Choosing a solo setup when your guest will also be speaking

    With a separate microphone input for each speaker, you can adjust the voices separately. A single microphone or USB connection won’t provide this automatically.

    Decide in advance whether your guest will be heard in the intro and whether you want separate recording tracks.

Brands to compare

RØDE

The PodMic USB is a dynamic speech microphone with USB and XLR connections, giving you a solo setup that can be connected differently later on.

  • RØDE says the PodMic USB has a headphone output and comes with a pop filter.
  • RØDE recommends speaking close to the microphone. Additional recording equipment is needed to use it via XLR.

Shure

According to Shure, the MV7+ combines USB-C and XLR with controls and digital features for voice recording.

  • Shure lists automatic level adjustment, digital noise processing and a headphone socket for this model.
  • Check that the associated app and your chosen connection work with your equipment. These features are manufacturer claims, not the result of an independent comparison.

Samson

The Q2U is a dynamic USB/XLR microphone with basic accessories for anyone looking for an easy way to get started.

  • Samson says the box includes a desktop stand, windscreen, USB cable and XLR cable. The model also offers direct headphone monitoring.
  • Check that the included stand lets you position the microphone as you’d like in your room.

Audio-Technica

The AT2020USB-X is a USB condenser microphone, while the AT2040USB is a separate dynamic USB model.

  • Audio-Technica specifies a cardioid pickup pattern, desktop stand, and headphone and mix controls for the AT2020USB-X.
  • The pickup angle specified by the manufacturer for the AT2040USB doesn’t automatically apply to the AT2020USB-X.

Elgato

The Wave DX is a dynamic XLR microphone for anyone who already has a compatible interface or is building a setup with separate microphones.

  • Elgato specifies a cardioid capsule for the Wave DX.
  • Elgato lists an XLR interface, XLR cable and stand or boom arm as requirements. This model doesn’t connect directly via USB.

Joybuy products for interviews and voice recording

The products below include wireless microphone systems for interviews and USB microphones for voice recording. Before buying, check that the connection and included accessories are suitable for your recording device and setup.

DJI Mic Mini 2S with 2 TX, 1 RX and charging case

DJI Mic Mini 2S (2 TX + 1 RX + Charging Case)

The set is listed with two transmitters and one receiver for an interview setup with two speakers.

The product name mentions a charging case.

View at Joybuy
Lark M2 wireless lavalier system

Lark M2 Wireless Lavalier Microphone System

A wireless lavalier system to compare if you’re looking for a clip-on microphone for an interview recording.

The product name mentions 48 kHz/24-bit and a transmitter weight of 9 g.

View at Joybuy
Moman M1CXT wireless lavalier system with USB-C, 2 TX and 1 RX

Moman M1CXT Wireless Lavalier Microphone, USB-C, 2TX+1RX

The set is listed with two transmitters and one receiver for an interview with two speakers.

The product name mentions USB-C. Check that this connection is suitable for your recording device.

View at Joybuy
USB condenser microphone with cardioid pickup pattern

USB Condenser Microphone, Cardioid Pattern

A USB condenser microphone to compare for recording a solo intro on a computer.

The product name mentions a cardioid pickup pattern.

View at Joybuy
DJI Mic 3 wireless microphone set with 1 TX and 1 RX

DJI Mic 3 (1 TX + 1 RX)

The set is listed with one transmitter and one receiver for a solo intro.

The product name mentions use with iPhone, camera and Android. Check which connection you’ll need for your device.

View at Joybuy

Frequently asked questions

How should you set up the microphone before recording the intro?

Check which side picks up sound, use a stable boom arm or stand, and listen back to a test recording. For the PodMic USB, RØDE recommends speaking directly towards the end of the microphone from around 5–10 cm away. Don’t automatically use this distance with other models.

Can one microphone record both people?

If you’re the only one recording the intro, one microphone is suitable for that setup. If your guest is joining in and you want to adjust the voices separately, use a dedicated microphone and input for each speaker. Focusrite describes an interface with two independent inputs for this purpose.

Does an XLR microphone need phantom power?

Not every XLR microphone needs phantom power. Focusrite says the dynamic microphones described don’t need it, and that the Vocaster Two can supply 48 V to condenser microphones that require it. Check the manual for the specific model.

What are your rights if an online microphone purchase isn’t suitable or develops a fault too soon?

According to ACM ConsuWijzer, online purchases generally come with a cooling-off period of up to 14 days after delivery, subject to some exceptions. You’re also covered by the legal guarantee if the product doesn’t perform as you could reasonably expect under normal use. This is separate from any manufacturer’s guarantee.

Can you publish a guest’s recognisable voice online without asking?

Don’t assume you have automatic permission. The Dutch Data Protection Authority says you need a lawful basis under the GDPR to publish other people’s personal data online, and consent is usually relevant when publishing it publicly. There are exceptions, including for purely personal or household use and for journalistic purposes; the precise assessment depends on how the recording is used.