If you’re mainly recording on your own in a room where you can hear housemates or a PC fan, start with a directional microphone positioned close to you and make a test recording; a pickup pattern or noise filter won’t guarantee a quiet recording. For an easy set-up, look at the stand, connection and headphone monitoring. If you want to control game audio separately or record a second speaker, you’ll also need to check your recording settings and choose a suitable pickup pattern.
Who is this guide for?
Solo recorder in a shared room
You’re recording the comparison yourself and want to stop room noise from overpowering your voice. Shure describes the MV6 Gen 2 as having a dynamic cardioid capsule; speaking close to the microphone and positioning it carefully still matter for the results in your room.
Student with a small desk
You want to record commentary without a separate audio interface, and need a stand, a suitable USB connection and an easy way to listen back. RØDE lists a detachable stand, direct headphone monitoring and a USB-C-to-USB-A cable included with the NT-USB Mini.
Recorder who sometimes has a second speaker
You usually record on your own, but sometimes want to capture two voices in the same room. HyperX lists several selectable pickup patterns for the QuadCast 2 S, including bidirectional recording.
What should you look for when choosing?
Start with the recording need that matters most to you: clear solo vocals, separate control of game audio, a simple desk set-up or room for a second speaker.
| What to consider |
What to look for |
Who is this important for? |
| Clear solo vocals |
Check the pickup pattern and whether you can position the microphone close to you; make a test recording in the room you usually use. |
If I’m recording on my own in a shared room, I want my voice to come through clearly without expecting a pickup pattern to remove all background noise. Around 36% of consumers prioritise clear solo vocals despite room noise. |
| Separate control of voice and game audio |
Check whether your recording software can capture your microphone and game as separate sources and tracks. |
When recording a game comparison, I want to be able to adjust the commentary and game audio separately afterwards. Around 29% of consumers put this first. |
| Set-up on a small desk |
Check which stand and cable are included, and which USB port your computer has. |
If my desk is short on space, I want to get started without a complicated set-up. For around 21% of consumers, a simple desk set-up is their main concern. |
| Recording a second speaker |
Check whether the model has a suitable pickup pattern and make a test recording from both seats. |
I sometimes want to record with someone else in the same room, so I need more flexibility than I would for solo commentary. Around 14% of consumers prioritise a second speaker. |
Common pitfalls
-
Confusing a higher bit depth with less room noise
A digital audio feature and the amount of audible room noise are two different things. To use the RØDE NT1 5th Generation’s 32-bit float output, your recording session must also be set to that format.
First, assess the pickup pattern, microphone placement and a test recording in your room. Then check whether a stated resolution is relevant to the way you work.
-
Leaving an omnidirectional pickup pattern on for solo commentary
A pattern that picks up sound from several directions may also capture noise from around the room.
For solo commentary, choose a suitable directional setting if the model offers one. Switch patterns only when you want to record a second speaker, and test both seats.
-
Expecting game audio and voice to be separated automatically
OBS Project says you need to assign audio sources to recording tracks; a separate microphone won’t configure those settings for you.
Record a short clip first and check the tracks in your editing software. If you like, keep a combined track as well for standard video players.
You’ll need extra time to set up and test your audio sources and tracks.
Brands to consider
RØDE
RØDE describes the NT-USB Mini as a compact cardioid USB microphone for solo commentary at a desk. According to the manufacturer, the NT1 5th Generation offers both USB and XLR connections.
- RØDE says the NT-USB Mini has a detachable stand, built-in pop filter and direct headphone monitoring. The included cable is USB-C to USB-A.
- The NT1 5th Generation’s 32-bit float output also requires a recording session set up for that format. These specifications alone don’t tell you how much room noise your recording will contain.
Shure
According to Shure, the MV6 Gen 2 is a USB microphone for one speaker who wants to record close to the mic and adjust their voice processing.
- Shure lists a dynamic cardioid capsule, Auto Level Mode and adjustable noise processing.
- These manufacturer descriptions don’t provide an independent measurement of how much room noise is reduced in a student room. Also check the system requirements for your device and any MOTIV software.
HyperX
The QuadCast 2 S may be worth considering if you switch between solo commentary and recording with a second speaker in the room.
- HyperX lists four selectable pickup patterns, headphone controls and a tripod with shock mount included.
- A wider pickup pattern may capture more ambient noise. RGB lighting isn’t an indicator of how clear a recording will be.
Elgato
Elgato describes the Wave:3 MK.2 as a USB condenser microphone with on-device controls and Wave Link for separate recording mixes.
- According to Elgato, the microphone has a cardioid capsule and headphone socket; Wave Link can create a separate recording mix.
- Elgato’s claims about DSP and distortion reduction come from the manufacturer. Bear in mind that specifications for the MK.2 don’t necessarily apply to the earlier MK.1.
Trust
Trust describes the GXT 232 Mantis as a straightforward USB set-up with a tripod and pop filter.
- According to Trust, a tripod and pop filter are included.
- Trust describes the microphone as omnidirectional and recommends placing it closer to the sound source you want to record if it picks up too much ambient noise.
Products for recording in a student room
This selection includes microphones and microphone systems whose product information mentions PC commentary, a small desk set-up or recordings with more than one speaker. Check the connection for each model and make a test recording with your software.
No image available
DJI Mic Mini 2S (2 TX + 1 RX + Charging Case)
If you also want to record a second speaker, the set’s two transmitters may suit your needs; check how the receiver works with your PC and recording software first.
The product name lists two transmitters, one receiver and a charging case.
View at Joybuy
No image available
Moman M1CXT Wireless Lavalier Microphone, USB-C, 2TX+1RX
This set may suit you if you’re looking for a wireless lavalier set-up with two transmitters; check that the USB-C connection works with your PC and recording software.
The product name lists two transmitters and one receiver.
View at Joybuy
No image available
Cardioid USB condenser microphone with headphone monitoring
The product name mentions a cardioid pattern and headphone monitoring, which may be useful if you want to record commentary at a desk and listen back straight away.
Check which connection and accessories are included, and make sure the connection is compatible with your computer.
View at Joybuy
No image available
HyperX SoloCast 2 USB Gaming Microphone, Cardioid, Black
This model may suit a compact set-up for solo commentary on a small desk; check that the USB connection is compatible with your computer.
The product name lists a cardioid pattern and the black version.
View at Joybuy
No image available
Razer Seirēn V3 Mini Quartz USB Microphone with Tap-to-Mute
If you record commentary at a desk and want to mute the microphone quickly, the product name lists tap-to-mute. Check the positioning and connection for your recording space.
The product name lists the Quartz version.
View at Joybuy
Frequently asked questions
Does a USB microphone automatically record game audio too?
No. Your microphone is a source for your voice; if you want to record game or application audio separately, set that up in your recording software too. OBS Project describes separate application audio sources for Windows 10 version 2004 or later and Windows 11; some applications require extra steps.
Why can’t I hear all the separate audio tracks in a standard video player?
OBS Project warns that standard video players generally play only one track at a time. For a version that plays straight away, put all the sources you want on track 1 as well; use other tracks to edit voice and game audio separately during editing.
Do I need a driver or audio interface for the RØDE NT-USB Mini?
According to RØDE, you don’t need one with a compatible PC or Mac that supports class-compliant USB audio. The included cable is USB-C to USB-A; check that it fits the port available on your device, then select the microphone as your audio input.
Can I publish recognisable voices of housemates or other players?
A sound recording in which someone is recognisable may contain personal data. The Dutch Data Protection Authority says that a suitable GDPR legal basis is generally needed to publish personal data publicly; the exception for personal or household use applies only in limited circumstances. Whether a particular recording can be published depends on who is recognisable, the purpose, the audience and the applicable legal basis.