Recording in a room with an echo
You record spoken intros in a less-than-ideal room and want your speech to be clear above all. You can position the microphone close to your mouth and listen back to the result in that room.
If you’re recording in a room with an echo, compare dynamic speech microphones and make a test recording from the distance you’ll actually speak at; no microphone will make the room quiet by itself. In a quiet space, a condenser microphone may also be suitable. USB is a simple option for a solo setup, while XLR requires a compatible audio interface and cable. On models with both connections, features may vary between outputs.
You record spoken intros in a less-than-ideal room and want your speech to be clear above all. You can position the microphone close to your mouth and listen back to the result in that room.
You want to record directly onto your computer and monitor your audio as you speak, without putting together an XLR setup first.
You have a quiet recording space and want to compare different microphone positions and vocal sounds. You may also want to use an audio interface later.
First, consider how quiet your recording space is and how close you can speak to the microphone. Then choose a connection that suits your current recording setup and any plans you have to expand it later.
The table sets out the options based on the main concerns of people recording spoken intros at home.
| Consideration | What should you look for? | Who should pay particular attention? |
|---|---|---|
| Clear speech in a room with an echo | Try a microphone you can position close to you, and assess a test recording in your own room. RØDE recommends a distance of around 5–10 cm for the PodMic USB specifically; this isn’t a general guideline for all models. | If I’m recording in a room with an echo, clear speech is my main priority, and I can keep the microphone close. Around 36% of consumers say that clear speech despite the sound of the room is their main concern. |
| Easy connection and monitoring | Check your computer’s connections and whether the microphone has a headphone output and direct monitoring. To record via XLR on a computer, you’ll need a compatible interface and an XLR cable. | If I just want to record without setting up an interface first, an easy connection and the ability to monitor my audio are important. For around 29% of consumers, ease of setup comes first. |
| Vocal sound in a quiet space | Compare test recordings from the same speaking position. The AT2020USB-X is a USB condenser microphone; the NT1 5th Generation has USB and XLR. | In a quiet space, I want to assess my voice and articulation in recordings. Around 21% of consumers prioritise vocal sound in this situation. |
| Room to upgrade later | Check which equipment requires XLR and which features are available with each connection. USB features don’t necessarily work over XLR. | If I want to change my recording setup later, I want to know what I can upgrade by changing the microphone or interface separately. Expandability is the main buying concern for around 14% of consumers. |
On a hybrid microphone, recording features and controls may differ between outputs. For example, Shure states that the MV7+ doesn’t offer digital processing or a mute function over XLR. RØDE says that 32-bit float on the NT1 5th Generation only works over USB.
Decide in advance which output you’ll use, then check the features available with that specific connection.
Distance and direction affect the recording level. RØDE recommends a specific distance of around 5–10 cm for the PodMic USB.
Make a test recording from a distance you can maintain while speaking, and check which mount and accessories are included with your chosen model.
To record via XLR on a computer, you’ll need a compatible audio interface and XLR cable; a suitable USB microphone can be connected directly.
Compare the complete setup you’ll need, including the connection, cables and monitoring.
These examples from RØDE include both a dynamic speech microphone and a condenser microphone, with models that combine USB and XLR.
Shure describes the MV7+ as a dynamic microphone for speech recording, with USB-C and XLR.
The AT2020USB-X is a cardioid USB condenser microphone for recording directly onto a computer.
Samson describes the Q2U as a dynamic microphone with USB and XLR.
These product picks are intended for spoken recordings at home and include microphone systems and USB desktop microphones.
No image available
The product description lists interviews and computer compatibility as uses for spoken audio.
The set includes 2 TX, 1 RX and a Charging Case.
No image available
The product description mentions voice recording and a headphone output for monitoring; check that it suits the setup you want.
The product name lists USB, a cardioid pattern and noise cancellation. The description mentions latency-free monitoring and an included boom arm stand.
No image available
The product description lists interviews and recording as uses; check that this system suits the way you record.
The set includes 2 TX, 1 RX and a Charging Case.
No image available
The description lists podcasts and recording as uses. The product name specifies USB and a cardioid polar pattern.
The description mentions a stand and boom arm mounting; check which setup works for your speaking position.
No image available
The product description mentions voice recording, calls and online meetings.
The product name specifies USB and tap-to-mute. The description mentions a compact design and plug-and-play use on a desktop.
Not if you connect a compatible USB microphone directly to your computer. To use an analogue XLR connection with a computer, you’ll need a compatible interface and an XLR cable. Also check the ports and included components of the exact model.
Check the direction, distance and input level, then listen back to a test recording. For the PodMic USB, RØDE recommends a distance of around 5–10 cm and notes that a greater distance can result in a quiet signal; don’t automatically apply this model-specific advice to other microphones.
Not necessarily; check the features for each model and connection. Shure says that the MV7+ doesn’t offer digital processing or a mute function over XLR, among other things. RØDE says that 32-bit float on the NT1 5th Generation only works over USB.
According to the Government of the Netherlands, you’re entitled to a product that works properly; depending on the circumstances, you may be entitled to a free repair, replacement or refund. There is no fixed statutory guarantee period. Normal wear and tear or damage caused by you isn’t covered in the same way.
If you’re processing personal data in doing so, the Dutch Data Protection Authority says you need a lawful basis under the GDPR. Consent is one possible basis, but it isn’t automatically the only one. The regulator also mentions an exception for purely personal or household use. Which rules apply to you depends on how you use the recording.